Aces High Bulletin Board

General Forums => Hardware and Software => Topic started by: maddog on January 10, 2001, 03:14:00 PM

Title: Toe brakes CH USB
Post by: maddog on January 10, 2001, 03:14:00 PM

I thought I read somewhere on here that they work.... how did they get configured? Axis etc?
doc

Title: Toe brakes CH USB
Post by: JimBear on January 10, 2001, 03:27:00 PM

Select the CH Pro Pedals in the joystick setup. Left Pedal and X axis, Right Pedal Y axis and the rudder stays with Z.  Do a stick calibration and when you depress them you shoud see it in the graph.

Ohh and dont forget to click on "set input" after setting each one

 (http://www.devildogs.com/vmf111/JB1095.gif)

[This message has been edited by JimBear (edited 01-10-2001).]

Title: Toe brakes CH USB
Post by: maddog on January 10, 2001, 03:44:00 PM

thanks.. worked .. didn't till I calibrated... then worked....
doc

Title: Toe brakes CH USB
Post by: RangerBob on January 15, 2001, 08:33:00 AM

I know this is kind of a late post, but anyone using the toe brakes please make sure that each time you do a calibration, or just wake up your stick & pedals by moving them, you don't forget to move the toe brakes through their complete cycle as well to calibrate that axis.

If you don't you'll find yourself crashing on take off and landings all the time with out of calibrated toe brakes.

Ranger Bob