Aces High Bulletin Board

General Forums => Hardware and Software => Topic started by: maik on September 30, 2000, 01:53:00 PM

Title: Abit BX6,2.0 and P3-700....
Post by: maik on September 30, 2000, 01:53:00 PM
finally got it  (http://bbs.hitechcreations.com/smf/Smileys/default/wink.gif).

But after installing the CPU runs only as 466 (66 Bus speed)  (http://bbs.hitechcreations.com/smf/Smileys/default/frown.gif).

Anybody some ideas???ß

Maik
Title: Abit BX6,2.0 and P3-700....
Post by: jihad on September 30, 2000, 02:23:00 PM
 You need to update the BIOS,here`s the URL for updated BIOS and flash utility,follow the istructions exactly.<IMPORTANT>


 http://www.abit-usa.com/english/download/bios%20update/bios-bx6r2.htm (http://www.abit-usa.com/english/download/bios%20update/bios-bx6r2.htm)
Title: Abit BX6,2.0 and P3-700....
Post by: maik on September 30, 2000, 05:03:00 PM
THX, Jihad but I already did that  (http://bbs.hitechcreations.com/smf/Smileys/default/frown.gif).

Maik
Title: Abit BX6,2.0 and P3-700....
Post by: kbman on September 30, 2000, 05:24:00 PM
Hi maik,
        Have you tried holding the insert key during boot up? This will load the BIOS default setup to CMOS then hit delete during the post to check out your BIOS settings and make sure everything is as it should be. Try this and post back with your settings in the CPU SoftMenuII section of the BIOS. Good Luck!

kbman
Title: Abit BX6,2.0 and P3-700....
Post by: jihad on September 30, 2000, 08:11:00 PM
 Disable the speed error hold setting in the CPU SOFT MENU section of the BIOS,then under CPU operating speed choose the user define option.

 This will allow you to manually set your CPU speed by adjusting the external clock and multiplier parameters.  (http://bbs.hitechcreations.com/smf/Smileys/default/wink.gif)
Title: Abit BX6,2.0 and P3-700....
Post by: kbman on September 30, 2000, 09:29:00 PM
Well, that was the next step... (http://bbs.hitechcreations.com/smf/Smileys/default/smile.gif) I was interested in seeing what the default setup was before making any of those changes. Also, disabling Speed Error Hold should only be necessary if he is going to overclock it. I still wanna see what he's got for settings in there before advising further (http://bbs.hitechcreations.com/smf/Smileys/default/wink.gif)

kbman
Title: Abit BX6,2.0 and P3-700....
Post by: maik on October 01, 2000, 01:41:00 AM
THX again, tried all of it, even manually could set it to 466 MHZ.

Settings don't work:

- CPU-Speed 700 (100)
- Turbo Enabled/disabled

- Voltage 1,65V


Settings that work:

- CPU-Speed 466(66)
......


Maik

Title: Abit BX6,2.0 and P3-700....
Post by: kbman on October 01, 2000, 04:22:00 AM
Hmmm... very strange. What does the post screen identify the CPU as? There is no such thing as a Pentium III 466, only 450,500,550 etc. under User Define you should be able to manually set all those parameters. What does it do when you say it doesnt work?Does it post and boot at all?  I have the same Mobo running a PIII 550E on it and the 1st time I put it in(after flashing the BIOS) it posted as a 366 but I was able to set it up correctly manually immediately. I now have it running at 733 quite well after some tweaking (http://bbs.hitechcreations.com/smf/Smileys/default/wink.gif) Is it a slot1 or an FC/PGA model?
If it is FC/PGA, then what type of Slotket adapter are you using? I have heard of problems with some adapters but they all have to do with voltage, never wrong CPU parameters. Please let us know and we should be able to get it straightened out.

kbman
Title: Abit BX6,2.0 and P3-700....
Post by: maik on October 01, 2000, 09:31:00 AM
here is the situation.

I could speed it up to 83 Mhz busspeed (x7).

as soon as i go up to 100 MHZ PC stays quiet.

already chkd the fit of pc - cards, ram, cpu etc.

Oh and its a slot1 - cpu.  (http://bbs.hitechcreations.com/smf/Smileys/default/wink.gif)

Maik

[This message has been edited by maik (edited 10-01-2000).]
Title: Abit BX6,2.0 and P3-700....
Post by: whels1 on October 01, 2000, 11:06:00 AM

Maik,

email me. wheels044@hotmail.com

Whels

 
Quote
Originally posted by maik:
here is the situation.

I could speed it up to 83 Mhz busspeed (x7).

as soon as i go up to 100 MHZ PC stays quiet.

already chkd the fit of pc - cards, ram, cpu etc.

Oh and its a slot1 - cpu.   (http://bbs.hitechcreations.com/smf/Smileys/default/wink.gif)

Maik

[This message has been edited by maik (edited 10-01-2000).]

Title: Abit BX6,2.0 and P3-700....
Post by: maik on October 02, 2000, 07:17:00 AM
I FOUUUUUUUUUUUUUUUND IT  (http://bbs.hitechcreations.com/smf/Smileys/default/biggrin.gif).

RAM-Module was broken, tried another and now I am runnin at 700  (http://bbs.hitechcreations.com/smf/Smileys/default/smile.gif)  (http://bbs.hitechcreations.com/smf/Smileys/default/smile.gif).

THX For ur help guys u are great.

<S>
Maik
Title: Abit BX6,2.0 and P3-700....
Post by: Staga on October 11, 2000, 04:16:00 PM
I just managed to get back to the net with my new Abit Raid-133 (http://hardocp.com/reviews/mainboards/abit/bx133) and PIII 700@933  (http://bbs.hitechcreations.com/smf/Smileys/default/biggrin.gif)

Something strange thought:
Runs like a hell but now I had to wait couple minutes before re-start if I switch power off from start menu.
If I select re-start it works like a swiss clock  (http://bbs.hitechcreations.com/smf/Smileys/default/smile.gif)

Now I need a couple Maxtors to have a raid-disks and GTS  (http://bbs.hitechcreations.com/smf/Smileys/default/biggrin.gif)