Aces High Bulletin Board
General Forums => The O' Club => Topic started by: Warspawn on December 23, 2010, 04:55:10 AM
-
...for the next convention! Bought a Piper Aztec F on Monday! Can't wait to make a trip down to HT's town! Here she is!
(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1356.snc4/162871_1528908778855_1118779234_31142655_7914271_n.jpg)
Garmin 430, Avidyne 650, color radar, known ice...new engines...
-
Heh, I'm the guy on the right with the bomber jacket. My partner's on the far let (not a pilot...just wants me to fly him when necessary) and our A&P is in the middle...
-
Very Nice!! Could you swing thru PA and pick me up on the way? :lol
-
Lol! HELLA yah! Actually, I'd love to draw a line from Bend, Oregon to the convention and offer rides; I can take 5 + me!
-
Now to work Dale for some time in his RV for trade in a multi/complex/hi-performance....ect, ect :cheers:
-
Very Nice!! Could you swing thru PA and pick me up on the way? :lol
Get your bellybutton down here and help me with my build, and I'll buy the gas for the trip :D
-
Von! Buy your doggy a headset! http://www.skygeek.com/mutt-muffs.html (http://www.skygeek.com/mutt-muffs.html)
I'm getting my Belgian Tervuren ready for flight!
-
Very Nice!! Could you swing thru PA and pick me up on the way? :lol
While you're there, could you stop at the Reading Regional Airport to pick me up? :airplane:
-
You could give it a cool paintjob....
paint 4 'machine gun' ports on the nose, paint a 'drop tank' on the fuselage... and a yellow band stripe (190D9) on the tail :devil
-
Now to work Dale for some time in his RV for trade in a multi/complex/hi-performance....ect, ect :cheers:
As long as you do not expect front seat. Last time I tried that with Bob Shaw, ended up with a bent airplane.
Also whats your airport ID?
HiTech
-
where is to being the K9 reflector gunsite? is also missing bombing shackles on wings; also in needing of 23mm sHvak gunning-pods for shmooshing of GVs. Might want to be think of adding twin .50cal turret to be covering 6 o'clock position. lasting, does get F3 mode for multiple crew, da?
Oy! almost forgeted; you in lucking that Guppy not flew, else would be in many teeny-tinyed pieces as looking much like p-38s he breaking on regular basis. :bolt:
-
As long as you do not expect front seat. Last time I tried that with Bob Shaw, ended up with a bent airplane.
Also whats your airport ID?
HiTech
:lol Your kidding...THE Robert Shaw bent your plane?! If not for the expense that must have been, the irony cracks my up. :rofl
I hope you called him a noob when it was over. :D
-
Also whats your airport ID?
HiTech
KBDN. I do practice approaches into the ILS nearby at Redmond, then RNAV's back into Bend, where the a/c is hangared.
-
...for the next convention! Bought a Piper Aztec F on Monday! Can't wait to make a trip down to HT's town! Here she is!
(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1356.snc4/162871_1528908778855_1118779234_31142655_7914271_n.jpg)
Garmin 430, Avidyne 650, color radar, known ice...new engines...
A good friend of mine over at FRG just traded his SR-20g3 for an Aztec - I thought he was high. Congrats on the new bird!
-
Do a quick search on "Piper Aztec Nomad". Someday.... :aok
-
...for the next convention! Bought a Piper Aztec F on Monday! Can't wait to make a trip down to HT's town! Here she is!
(http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1356.snc4/162871_1528908778855_1118779234_31142655_7914271_n.jpg)
Garmin 430, Avidyne 650, color radar, known ice...new engines...
Im jealous
-
Very nice :aok
-
Im jealous
+1
Congrats bro, beautiful plane
-
Get your bellybutton down here and help me with my build, and I'll buy the gas for the trip :D
Worked at a machine shop in Lansdale for 4 years (cnc mills, lathes etc) I think i may remember how to use a manual Bridgeport :headscratch: :lol
-
Get your bellybutton down here and help me with my build, and I'll buy the gas for the trip :D
Worked at a machine shop in Lansdale for 4 years (cnc mills, lathes etc) I think i may remember how to use a manual Bridgeport :headscratch: :lol
-
Get your bellybutton down here and help me with my build, and I'll buy the gas for the trip :D
Worked at a machine shop in Lansdale for 4 years (cnc mills, lathes etc) I think i may remember how to use a manual Bridgeport :headscratch: :lol
-
so, you worked at a machine shop? ;)
-
Lol! HELLA yah! Actually, I'd love to draw a line from Bend, Oregon to the convention and offer rides; I can take 5 + me!
Bend !!! im in Prineville, airports right up the hill lol
-
:lol Your kidding...THE Robert Shaw bent your plane?! If not for the expense that must have been, the irony cracks my up. :rofl
I hope you called him a noob when it was over. :D
And I am not kidding.
Was not the smartest day either of us had.
HiTech
-
:lol Your kidding...THE Robert Shaw bent your plane?! If not for the expense that must have been, the irony cracks my up. :rofl
I hope you called him a noob when it was over. :D
Shaw was at the ?2008? AH Con, and told another story - he was in the back seat of HT's RV, and had the airplane during a maneuver. The bird was nose down, and HT kept saying, "Getting time here, pull 'er up....pull 'er up....FINE! My plane!" Dale takes control and pulls out of dive just fine.
Turns out that the cotter pin had pulled out of the rear stick socket, and the shaft of the stick was hanging free after Shaw started the maneuver. He didn't say anything because he kept figuring, "Not a problem, I'll just slip it back in...Ok, I'll get it this time...I'll get it THIS time...."
:lol
Was great to hear some flight stories from him...and I now have an autographed copy of Fighter Combat, addressed to Simaril!
-
If ya ever swing down the coast on your way to a con or something, hit me up! Congratz on your new toy!
-
so, you worked at a machine shop? ;)
LOL.......yep 4 years. Darn lag :lol
-
:rofl
-
LOL.......yep 4 years. Darn lag :lol
:D
sorry Mbailey that was a high fat one right down the center of the plate ;)
-
:D
sorry Mbailey that was a high fat one right down the center of the plate ;)
Im takin my ball and goin home :rofl :aok
-
Good looking plane. Call me when u stop by Salt Lake City, I'll give u a tour of mine, and we'll go have a :cheers:
-
Good looking plane. Call me when u stop by Salt Lake City, I'll give u a tour of mine, and we'll go have a :cheers:
Dang! I was actually just in Salt Lake looking at a 337 before deciding on this ride. Looked at that, a Baron 58, and a Cessna 310; liked this one the most. I'll make another trip down there, I'm sure. I decided against the Skymaster there when the owner landed the plane, taxi'd to the hangar, then got a towel to wipe the oil off the elevator, telling me, "it's normal to have to clean all the oil that leaks out of the rear engine..." :headscratch: