Aces High Bulletin Board
General Forums => Hardware and Software => Topic started by: Rob52240 on November 01, 2011, 08:58:27 AM
-
Before my hiatus I could use an AO on my throttle to move my head position side to side in aircraft and I'd use the same output to steer ground vehicles.
Upon returning all of my settings remained the same aside from this one (and a few gunsights that wont load) and I am unable to map this output to anything useful.
Any ideas as to what I can do to get it back to how it was?
-
Does AH recognize the controller axis you're trying to map?
-
What is this "AO" that you use on your throttle?
-
Yes aces high recognizes it.
It's a rocker on the throttle that is supposed to be used as a rudder. I guess you can call it an extra Z rotation.
-
Waht type of stick might i ask ?? Some of the other GURU's of hardware might be able to help you out better.
-
Its the cheapo thrustmaster hotas.
I'm guessing something changed with an update during the last month or two. It kept all my other settings.
I just miss being able to look around the metal parts of the canopy and look back over either shoulder by rocking it left or right.
With the gvs I really really miss it because im constantly killing the engine while trying to turn it. I was able to map it to left/right turn with the gvs but it just goes to a constant left turn regardless of what I'm doing with the stick.
Here's a photo of it. You can use it as the same output as the stick twist or a seperate one. It's just a spring loaded lever that can be pressed on either end .
(http://www.thrustmaster.com/Upload/1/thrustmaster/products/226/8/Files/4048/TFlightHotasX800x600_4.jpg)
-
If it's recognized you should be able to map it to any axis in AH.