Aces High Bulletin Board

Help and Support Forums => Aces High Bug Reports => Topic started by: hitech on April 05, 2012, 11:06:38 AM

Title: Track IR trirtest3.exe
Post by: hitech on April 05, 2012, 11:06:38 AM

I have a new test version that I hope fixes the Track Ir Issues.

Please download this file directly into your aces high folder and then run it instead of running Aces High.


http://downloads.hitechcreations.com/trirtest3.exe (http://downloads.hitechcreations.com/trirtest3.exe)


HiTech

Title: Re: Track IR trirtest3.exe
Post by: Chauncy on April 05, 2012, 11:18:42 AM

Tested on p38 and p40.  Both seem to be working.

Thank you.

you might want to tie this into or link it in the other TIR thread.  I didn't see this at first.

Thanks again.

Chauncy

Title: Re: Track IR trirtest3.exe
Post by: FLS on April 05, 2012, 11:20:12 AM

I have to work late again but I'll test the known problems when I get home.
Thanks.  :cheers:

Title: Re: Track IR trirtest3.exe
Post by: PFactorDave on April 05, 2012, 11:50:04 AM

Seems to have solved the issues I was having.   :salute

Title: Re: Track IR trirtest3.exe
Post by: lulu on April 05, 2012, 11:56:24 AM

I tried it on all last version planes.

It works good  except in me 163B.

I dont fly me 163B so I'm not completely sure about it.

On my tir, roll, y axes are off.

 :salute

Title: Re: Track IR trirtest3.exe
Post by: PFactorDave on April 05, 2012, 12:23:11 PM

I don't know if this is related to TrackIR or not...  I suspect that it may be...

Was flying with the tritest3 in a Ki84.  Game got stuttery, micro stutters.  Then it dumped me to the desktop with this popup, which I have never seen before.

(http://i177.photobucket.com/albums/w220/Davis_Andrews/error1.jpg)

I clicked the retry button which took me back into the game, but TrackIR was no longer working in game.

Title: Re: Track IR trirtest3.exe
Post by: PFactorDave on April 05, 2012, 02:00:28 PM

M16 isn't right, have to turn off TrackIR to get into the gun site

Title: Re: Track IR trirtest3.exe
Post by: lulu on April 05, 2012, 05:09:00 PM

"I tried it on all last version planes. [fighters and off-line]

It works good  except in me 163B.

I dont fly me 163B so I'm not completely sure about it.

On my tir, roll, y axes are off."


On-line, i tried on p51, f4u, spit, p39, and it works good.


 :salute

Title: Re: Track IR trirtest3.exe
Post by: ImADot on April 05, 2012, 06:08:39 PM

I haven't tried everything, but the main ones I use (zeke, hurri, P40) and had issues with are now working perfectly with trirtest3.

 :salute

Title: Re: Track IR trirtest3.exe
Post by: macdp51 on April 05, 2012, 06:39:45 PM

Fixed a view issue in the Lanc too - Thank You -  :roc
HP

Title: Re: Track IR trirtest3.exe
Post by: FLS on April 05, 2012, 06:43:46 PM

The aircraft default head position is centered again in the aircraft I listed before. A6m's, C-47, F6F, P-40, and Mossie 16. F10 works to reset the head position.

I tried the Me163 since lulu posted about it but the Y axis and roll worked fine for me.

F10 will also reset the head position without pausing TIR and if I tap F10 repeatedly in the tower without moving my head my virtual head will move in small increments, either forward and left or back and right. Pausing TIR and using home and F10 resets the head position to default.

I tested with the Trackclip and TrackclipPro with the default TIR profile.

It's certainly usable now but F10 resetting the head position while TIR is active is new behavior and I assume it's unintentional.

The response also feels different but I think that adjusting my regular profile will take care of that.

Title: Re: Track IR trirtest3.exe
Post by: lulu on April 06, 2012, 05:31:23 AM

"I tried the Me163 since lulu posted about it but the Y axis and roll worked fine for me."

It's possible that you are right because i flew me163B very few times and some years ago (!).

It seemed to me that on me163b the zero y axes point and back view were a bit too low.

I don't fly bombers or drive gvs so i have not points of reference to judge as tir is working on they.

 :salute

Title: Re: Track IR trirtest3.exe
Post by: hyzer on April 06, 2012, 07:49:04 AM

Worked fine for me in the  F4u-1a, 109F, Hurri 2C and the P-40E.  My profile didn't seem to feel any different than before.

Title: Re: Track IR trirtest3.exe
Post by: hitech on April 06, 2012, 09:23:17 AM

Quote from: FLS on April 05, 2012, 06:43:46 PM

It's certainly usable now but F10 resetting the head position while TIR is active is new behavior and I assume it's unintentional.

This is intentional. I can not think of any reason not to have it active. The reason it jumps is because when the current head position is saved. That position then becomes the zero point , and since your head is currently not at zero it jumps.

HiTech

Title: Re: Track IR trirtest3.exe
Post by: FLS on April 06, 2012, 10:16:27 AM

That makes sense. It's jumping because I have deadband in the center and I didn't realize I moved slightly.

I tested again with my usual TIR profile and everything looks good now. The only difference I notice is the increased head movement limit.  :aok

Title: Re: Track IR trirtest3.exe
Post by: xStrato on April 06, 2012, 08:54:42 PM

i get an error while trying to download this. "can't start because mss32.dll is missing"

I am running Windows 7 x64. I am guessing it isn't 64 bit compatible.

Title: Re: Track IR trirtest3.exe
Post by: PFactorDave on April 06, 2012, 08:57:43 PM

Quote from: xStrato on April 06, 2012, 08:54:42 PM

i get an error while trying to download this. "can't start because mss32.dll is missing"

I am running Windows 7 x64. I am guessing it isn't 64 bit compatible.

Wrong one.

you need this one...  http://bbs.hitechcreations.com/smf/index.php/topic,331757.0.html

Title: Re: Track IR trirtest3.exe
Post by: xStrato on April 06, 2012, 09:01:58 PM

Same thing. Thank you. I do appreciate the help.

Title: Re: Track IR trirtest3.exe
Post by: hitech on April 08, 2012, 07:56:26 AM

You did not put in in your Aces High Folder