Aces High Bulletin Board

General Forums => Aces High General Discussion => Topic started by: DarkHawk on May 20, 2012, 05:12:26 PM

Title: DGS Axis ZG76 ME410/A8
Post by: DarkHawk on May 20, 2012, 05:12:26 PM
If the ME410 becomes available before DGS starts and you want to fly it. Contact Dhawk in this post. If it is not available we will be flying FW190A8.
Tells us now for early signup.

DHawk   GL ZG76
Title: Re: DGS Axis ZG76 ME410/A8
Post by: Krusty on May 20, 2012, 09:47:05 PM
I missed that part. They going to add the 410 to the scenario if it's added in time?

Very cool!


:airplane:
Title: Re: DGS Axis ZG76 ME410/A8
Post by: ROC on May 21, 2012, 11:53:25 AM
So long as it's added in time to make sure the thing performs as expected.  I "expect" to use the A8 and "hope" to use the 410.
Title: Re: DGS Axis ZG76 ME410/A8
Post by: leitwolf on May 21, 2012, 08:03:13 PM
410s?

This ought to be fun :D

<- Requesting a seat in ZG76. :salute

I've drummed up my squad, I bet there will be a few of them coming out of the woodwork.
Title: Re: DGS Axis ZG76 ME410/A8
Post by: Krusty on May 21, 2012, 09:24:37 PM
So long as it's added in time to make sure the thing performs as expected.  I "expect" to use the A8 and "hope" to use the 410.

That would be SO awesome, if so. I won't hold my breath on how fast "2 weeks" takes to get here, but I do take solace that HTC has been putting out updates faster than they used to. Like you said, expect and hope.  :aok
Title: Re: DGS Axis ZG76 ME410/A8
Post by: Dace on May 21, 2012, 10:15:46 PM
Sweet, more nice big fat targets.  :devil
Title: Re: DGS Axis ZG76 ME410/A8
Post by: ROC on May 21, 2012, 11:21:24 PM
Leitwolf, adding you to the Axis forums now.

Krusty...you in?
Title: Re: DGS Axis ZG76 ME410/A8
Post by: Daddkev on May 21, 2012, 11:24:17 PM
 :huh :huh You want a 410.....get me 4 110s and some Ducttape!  :huh :huh :huh Might be faster  :x :rofl :banana:
Title: Re: DGS Axis ZG76 ME410/A8
Post by: Volron on May 21, 2012, 11:25:04 PM
:huh :huh You want a 410.....get me 4 110s and some Ducttape!  :huh :huh :huh Might be faster  :x :rofl :banana:

 :rofl
Title: Re: DGS Axis ZG76 ME410/A8
Post by: Krusty on May 22, 2012, 12:24:37 AM
ROC: I'm not going to commit to it just now. I'll help out with some artwork and whatnot, but don't add me to forums yet. Thanks for asking, though.
Title: Re: DGS Axis ZG76 ME410/A8
Post by: ROC on May 22, 2012, 11:35:46 AM
Ok, Krusty, I think you'd have fun though, but I do understand about time constraints.

Give me a yell if you would like to put your skillz to task and knock out some of those nice planes for the axis guys.
Title: Re: DGS Axis ZG76 ME410/A8
Post by: leitwolf on May 22, 2012, 12:30:48 PM
Leitwolf, adding you to the Axis forums now.[..]
Wee thank you :x
Let's hope the plane doesn't suck too hard :lol
Title: Re: DGS Axis ZG76 ME410/A8
Post by: Vasco on May 22, 2012, 04:39:56 PM
Leitwolf needs someone to keep his arse safe. So feel free to add me to ZG76.
FW-190A8/R2 is ok for me also, in case the Hornisse doesn't make it until then.

Cheers,
Vasco
 :cheers:
Title: Re: DGS Axis ZG76 ME410/A8
Post by: Canspec on May 22, 2012, 04:45:32 PM
I hear its at least two weeks for the 410.... :old:
Title: Re: DGS Axis ZG76 ME410/A8
Post by: Vasco on May 22, 2012, 04:50:35 PM
I may also volunteer for GL or XO. Went through DGS1 and BoG (GL) in 190A8s, ripping them apart.  :rock
Title: Re: DGS Axis ZG76 ME410/A8
Post by: ROC on May 22, 2012, 05:33:14 PM
Adding you know Vasco.  Take a look at the roster and let me know if you want to take a group or fly with Leitwolf
Title: Re: DGS Axis ZG76 ME410/A8
Post by: DarkHawk on May 22, 2012, 08:49:41 PM
DHawk could use a good FL or 3
Title: Re: DGS Axis ZG26 ME410/A8
Post by: DarkHawk on May 23, 2012, 02:50:43 PM

We now have a name change from ZG76 to ZG26.
Have a special skin for our aircraft.
DHawk
Title: Re: DGS Axis ZG76 ME410/A8
Post by: ROC on May 23, 2012, 02:52:11 PM
Dhawk, looks like we are going to get Noir in the group.  Bit heavy on the French, but that's a historical element, we have to learn how to talk to Finns, Germans, Americans and French :) 

Sure glad we have months to wind this thing up!!
Title: Re: DGS Axis ZG76 ME410/A8
Post by: Shuffler on May 23, 2012, 03:58:06 PM
Dhawk, looks like we are going to get Noir in the group.  Bit heavy on the French, but that's a historical element, we have to learn how to talk to Finns, Germans, Americans and French :) 

Sure glad we have months to wind this thing up!!


.... and boy does it add immersion. :D
Title: Re: DGS Axis ZG76 ME410/A8
Post by: DarkHawk on May 29, 2012, 03:54:48 PM
Come fly this beauty in the fall with ZG26
DHawk
Title: Re: DGS Axis ZG76 ME410/A8
Post by: USAF2010 on May 29, 2012, 04:21:35 PM
Please add me to ZG26!!


-INCOMING
Title: Re: DGS Axis ZG76 ME410/A8
Post by: Krusty on May 29, 2012, 11:01:44 PM
Front page yields good news on the chance of seeing 410s in this scenario!
Title: Re: DGS Axis ZG76 ME410/A8
Post by: Guppy35 on May 30, 2012, 12:08:35 AM
I'm sorry, we found the first AH 410.  Downed by a 364th Mustang :)

(http://i152.photobucket.com/albums/s199/guppy35/410-1.jpg)
Title: Re: DGS Axis ZG76 ME410/A8
Post by: Wagger on May 30, 2012, 08:03:42 AM
Requesting a slot in ZG76.
Title: Re: DGS Axis ZG76 ME410/A8
Post by: DarkHawk on May 30, 2012, 10:51:49 AM
Hey Guppy It took five of your mustangs to get him after he shot down 4 of you
LOL
DHawk