Aces High Bulletin Board
Help and Support Forums => Technical Support => Topic started by: bortas1 on January 19, 2013, 12:02:12 PM
-
:salute Hey gents. i have a logitech force 3d pro. not really how to twwek it. any ideas?
thank you in advance .
bortas of duxford :cheers:
-
Heya Bort! :salute
Come see me in the TA and I'll see if I cant help with your joystick. The logitech sticks have problems with the potentiometers going bad so you could be having a spiking issue.
Open clipboard,goto control maps and watch the numbers on each axis,if they are jumping around or dont transition smoothly then you likely have bad pots.,check the advanced box and look at the "raw" window,move the JS through it's movement and watch the slider. It should move up and down in a smooth linear fashion,if not again you have bad pots. You will have to select each axis and test to see which if any axis is affected.
hope this helps,if not like I said look me up and I'll see if I cant help you further.
:salute
-
:salute
Heya Bort! :salute
Come see me in the TA and I'll see if I cant help with your joystick. The logitech sticks have problems with the potentiometers going bad so you could be having a spiking issue.
Open clipboard,goto control maps and watch the numbers on each axis,if they are jumping around or dont transition smoothly then you likely have bad pots.,check the advanced box and look at the "raw" window,move the JS through it's movement and watch the slider. It should move up and down in a smooth linear fashion,if not again you have bad pots. You will have to select each axis and test to see which if any axis is affected.
hope this helps,if not like I said look me up and I'll see if I cant help you further.
:salute thanks morf will do.