Aces High Bulletin Board

Help and Support Forums => Aces High Bug Reports => Topic started by: McShark on January 22, 2014, 11:31:41 AM

Title: New NDISLES map
Post by: McShark on January 22, 2014, 11:31:41 AM: LAnding on CV31 with 109K4

After landing goes backwards:

Without brakes
Sidways

Also when on reload spot prop keeps spinning due to cv speed?

Skuz, have this on film if you like.
Title: Re: New NDISLES map
Post by: Ack-Ack on January 22, 2014, 02:48:12 PM: When you land on the CV, make sure that your throttle is completely cut to 0% to prevent moving backwards.

ack-ack
Title: Re: New NDISLES map
Post by: McShark on January 22, 2014, 04:38:36 PM: Quote from: Ack-Ack on January 22, 2014, 02:48:12 PM
When you land on the CV, make sure that your throttle is completely cut to 0% to prevent moving backwards.

ack-ack

I wanted to go backwards. I moved SIDEWAYS towards the twin 5" guns....

Going backwards without brakes on? Also new to me....
Title: Re: New NDISLES map
Post by: Arlo on January 22, 2014, 04:43:58 PM: Quote from: McShark on January 22, 2014, 04:38:36 PM
I wanted to go backwards. I moved SIDEWAYS towards the twin 5" guns....

Going backwards without brakes on? Also new to me....

Turning CV?

Now, when it comes to 're-spotting' planes on the CV deck, going backwards has nothing to do with brakes. Brakes are for stopping. A touch of throttle will move
the A/C backwards (no more than a little). Be sure to use your rear view and rudder. The rudder will help adjust right or left. If you don't want to move then make
sure your throttle is at 0 (or, better yet, kill your engine). G'luck! :D :cheers: :salute

P.S. I don't see this as a 'bug report' issue, imo, since it involves using the 109 in a manner that it wasn't designed for in game.
Title: Re: New NDISLES map
Post by: icepac on January 23, 2014, 08:28:24 AM: Pretty sure only the storch should be windmilling down to 40mph but I landed a spit XIV and it would not stop windmilling.
Title: Re: New NDISLES map
Post by: Dragon Tamer on January 23, 2014, 07:55:45 PM: I had some similar issues on another map with CVs.

Landed on a CV with an F4U-A with tail hook, tail hook caught and I came to a stop. Right after I stopped moving I was thrown off the side of the ship for no reason. It wasn't even turning, just going in a straight line.
Title: Re: New NDISLES map
Post by: Arlo on January 24, 2014, 07:49:13 AM: Quote from: Dragon Tamer on January 23, 2014, 07:55:45 PM
I had some similar issues on another map with CVs.

Landed on a CV with an F4U-A with tail hook, tail hook caught and I came to a stop. Right after I stopped moving I was thrown off the side of the ship for no reason. It wasn't even turning, just going in a straight line.

Did you catch the wire parallel to the ship's course or were you off kilter by more than 30 degrees?
Title: Re: New NDISLES map
Post by: icepac on January 24, 2014, 10:58:51 AM: I've never used the tailhook
Title: Re: New NDISLES map
Post by: Scca on January 24, 2014, 03:04:39 PM: Did they ever fix the fling you off deck issue? If they didn't then you can't add power with the hook down. After landing, pull hook up before adding throttle...
Title: Re: New NDISLES map
Post by: Arlo on January 24, 2014, 03:08:10 PM: Quote from: Scca on January 24, 2014, 03:04:39 PM
Did they ever fix the fling you off deck issue? If they didn't then you can't add power with the hook down. After landing, pull hook up before adding throttle...

I'm traditional. I chop throttle at the point of catching the wire. I highly recommend it. ;)
Title: Re: New NDISLES map
Post by: Dragon Tamer on January 24, 2014, 04:45:30 PM: Quote from: Arlo on January 24, 2014, 07:49:13 AM
Did you catch the wire parallel to the ship's course or were you off kilter by more than 30 degrees?

I'm not entirely sure, I don't think I have the film to double check. I will rummage around my films folder though (I think I rage deleted it after loosing the 5 kills that I worked so hard for).