Aces High Bulletin Board

General Forums => Wishlist => Topic started by: skorpx1 on April 08, 2014, 06:02:51 PM

Title: Three In One Wish.
Post by: skorpx1 on April 08, 2014, 06:02:51 PM
In an attempt to keep this forum from being flooded with 3 different threads (By the same moron) i'll just wrap up my wishes into one.



1: StuG III Ausf G.

Specs:

Weight   23.9 tonnes (52,690 lbs)
Length   6.85 m (22 ft 6 in)
Width   2.95 m (9 ft 8 in)
Height   2.16 m (7 ft 1 in)
Crew   4


Armor   16 – 80 mm (.62 - 3.15 in)
Main armament :1x 7.5 cm StuK 40 L/48 - 54 rounds
Secondary armament: 1x 7.92 mm Maschinengewehr 34 - 600 rounds
Engine: Maybach HL 120 TRM V-12 gasoline engine driving six-speed transmission[3] 300 PS (296 hp, 221 kW)
Power/weight: 12.6 PS/tonne
Suspension:   torsion bar
Speed: 40 km/h (25 mph)

Pic:
(http://upload.wikimedia.org/wikipedia/commons/8/87/StuG_III_Dorset.jpg)


Why shouldn't we have the StuG? It's probably not that hard to model, and on top of that we'd be able to bring in the Pz3, which in turn could result in 2 tanks being released at once. If we currently have 3 turretless TD's why not throw this one in along with the Pz3?



Wish 2:

Update the SBD and TBM.

Wish 3:

P-61C

Specs:
4x 20mm Hispano's in the front.
4x .50 Caliber M2's in the front.
Twin Pratt & Whitney Wasp R2800 25-S Wasp engines.


Pic:

(http://www.maam.org/p61/images/north-p61e.jpg)


Didn't have a lot of time to do this, so i'll come and improve it later.
Title: Re: Three In One Wish.
Post by: Ack-Ack on April 08, 2014, 06:33:35 PM
P-61C never saw combat.  If you want the Black Widow it will have to be either the A or B model.

ack-ack
Title: Re: Three In One Wish.
Post by: Karnak on April 08, 2014, 07:15:17 PM
I'd want the P-61B with the quad .50 turret.
Title: Re: Three In One Wish.
Post by: Coalcat1 on April 08, 2014, 07:45:08 PM
In an attempt to keep this forum from being flooded with 3 different threads (By the same moron) i'll just wrap up my wishes into one.



1: StuG III Ausf G.

Specs:

Weight   23.9 tonnes (52,690 lbs)
Length   6.85 m (22 ft 6 in)
Width   2.95 m (9 ft 8 in)
Height   2.16 m (7 ft 1 in)
Crew   4


Armor   16 – 80 mm (.62 - 3.15 in)
Main armament :1x 7.5 cm StuK 40 L/48 - 54 rounds
Secondary armament: 1x 7.92 mm Maschinengewehr 34 - 600 rounds
Engine: Maybach HL 120 TRM V-12 gasoline engine driving six-speed transmission[3] 300 PS (296 hp, 221 kW)
Power/weight: 12.6 PS/tonne
Suspension:   torsion bar
Speed: 40 km/h (25 mph)

Pic:
(http://upload.wikimedia.org/wikipedia/commons/8/87/StuG_III_Dorset.jpg)


Why shouldn't we have the StuG? It's probably not that hard to model, and on top of that we'd be able to bring in the Pz3, which in turn could result in 2 tanks being released at once. If we currently have 3 turretless TD's why not throw this one in along with the Pz3?



Wish 2:

Update the SBD and TBM.

Wish 3:

P-61C

Specs:
4x 20mm Hispano's in the front.
4x .50 Caliber M2's in the front.
Twin Pratt & Whitney Wasp R2800 25-S Wasp engines.


Pic:

(http://www.maam.org/p61/images/north-p61e.jpg)


Didn't have a lot of time to do this, so i'll come and improve it later.

     I really would like to see the stug added, it played a huge part on the eastern and western fronts, proving to be an effective weapon.