Aces High Bulletin Board

Help and Support Forums => Technical Support => Topic started by: Phoenix3107 on January 09, 2015, 07:03:36 PM

Title: Microphone Speakers/Audio issues
Post by: Phoenix3107 on January 09, 2015, 07:03:36 PM
I've been running a few tests on how to hear better audio when using radio channels on AH. I have two sets of speakers: One set for speakers(hearing sound and playback), and another set for microphone usage. The microphone speakers are working greatly, however, when I go to hear if I can hear myself through the film runner, all I hear are the channel beeps, but not my own voice on either station. Any useful suggestions on how to fix this?  :headscratch:
Title: Re: Microphone Speakers/Audio issues
Post by: The Fugitive on January 09, 2015, 08:23:12 PM
Im guessing here, but you don't play on-line correct? If so, I don't think the voice coms work off-line just with you, you have to transmit to someone else for them to go through. Again, Im only guessing.
Title: Re: Microphone Speakers/Audio issues
Post by: Phoenix3107 on January 09, 2015, 08:30:59 PM
Found the problem, I just had to boost the sound of the mic so that I could hear better, so I'm set. :aok

Im guessing here, but you don't play on-line correct? If so, I don't think the voice coms work off-line just with you, you have to transmit to someone else for them to go through. Again, Im only guessing.

Unfortunately, yes, I can't play online for a while, but somewhere along the line, I'll get on eventually. As stated above, found and fixed it.
Title: Re: Microphone Speakers/Audio issues
Post by: FLS on January 09, 2015, 10:27:22 PM
Thanks for posting your solution.

You can hear yourself live offline if you tune radio V to "server" without the quotes.
Transmit with the T key or set a button to tuned channel.
Title: Re: Microphone Speakers/Audio issues
Post by: Phoenix3107 on January 09, 2015, 10:48:28 PM
Thanks for posting your solution.

You can hear yourself live offline if you tune radio V to "server" without the quotes.
Transmit with the T key or set a button to tuned channel.

Thanks, I'll keep this in mind.