Aces High Bulletin Board
General Forums => Hardware and Software => Topic started by: Bruv119 on March 10, 2017, 04:31:31 PM
-
So today out of the blue game locks up, on reboot I get BSOD error chdrvr.sys quick google and it doesn't make nice reading.
Had to un-plug my CH stuff to get onto desktop and then removed the CH manager. However this has worked fine for months with no problems :bhead.
Now I'm resorting to using windows to detect which was ok except for the throttle. Changed the USB port and that is working again.
Was wondering what you guys are doing in this situation because it will be a PITA if I have to configure buttons everytime I login.
-
Are you using a powered USB hub?
I think one of those will solve issue
-
yes I have a powered hub.
-
Which flavour of Windows are you using?
-
Sadly, after APEM bought CH they decided to pretty much abandon retail customer support.
Bruv, can you find an older release of the CH Manager? Some of the threads I see out there point to that as a possible band-aid fix.
Good luck. :salute
-
64bit.
was using 4.51 until that stopped working then installed the latest version 4.55 which has been ok for the last few weeks.
-
heh, just read the title saying 10...
Anyhow, have you got the "fast startup" feature enabled? That may cause small glitches to accumulate until they create a real issue. It's simple to disable: https://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html (https://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html)
-
One of the reasons I have yet to migrate over to Windows 10 is what a CH rep told me when Windows 10 was released. What he told me was that CH Control Manager was not supported in Windows 10 and while they might add support, there weren't any current plans to and the proposed Windows 10 beta version of CM cancelled. That's why I've been slowly switching out my CH gear and will probably replace my Combat Stick with either a Baur BRD-D (will allow me to use my Combat Stick handle) or one of the new VKB sticks and throttles coming out.
-
Ack-Ack, since I recall you having some sort of inside information about CH, how about running the CH Control Manager in Compatibility Mode? Would that solve any of the potential issues?
I'm asking this on behalf of other players, my only CH gear is a Mach2...
-
Ack-Ack, since I recall you having some sort of inside information about CH, how about running the CH Control Manager in Compatibility Mode? Would that solve any of the potential issues?
I'm asking this on behalf of other players, my only CH gear is a Mach2...
It may work in Windows 10 if you set compatibility mode to Windows 7 or 8.1 but I don't have a Windows 10 machine to test it on.
-
for now windows is dealing with the controllers ok after reboot without having to re-map.
-
Bruv, out of curiosity, why do you feel the need to use CH Manager?
I stopped using it back when I switched from WinXP to Win 7...
I don't recall there being much AH couldn't do that ch manager could...outside of macros that is
TC
-
He is using CH manager to fine tune his stick to his advantage in game :)
-
Bruv, out of curiosity, why do you feel the need to use CH Manager?
I stopped using it back when I switched from WinXP to Win 7...
I don't recall there being much AH couldn't do that ch manager could...outside of macros that is
TC
I was using the rescan for devices button so win10 would recognise all 3 devices everytime I logged in.
I've started a few times and it appears win10 is actually remembering them now. Maybe one of the updates improved that area from the initial upgrade.
-
Have Windows 10 and CH Control manager.
Have had no issues.
-
Have Windows 10 and CH Control manager.
Have had no issues.
thanks for that, as I said it came out of nowhere after working fine.
http://www.ch-hangar.com/forum/index.php/topic/8223-the-never-ending-chdrvr01-problem/
-
Bruv I've had my new computer for a year and a half now with windows 10. I've never had a problem using the ch manager since then. I do remember once my windows would not load. I had to unplug my ch gear and plug it back when windows was up running. Soon windows 10 had an update(not sure what the update was) but since then I have never had an issue with my ch manager or ch gear.
-
are you both running the latest version 4.55a?
-
are you both running the latest version 4.55a?
:aok
-
Just upgraded to an AMD Ryzen 7 platform using Win 10 Home w\ CH Products Control Manager vers 4.55.
CH Control Manager vers 4.55 & CM Control Center is working just fine w\ my CH USB HOTAS under Win 10 Home w\ 1607 update.
Waiting on the latest Windows Creators Update to hit to see if things change but so far, so good.
FYI.......................... .....
:salute