Aces High Bulletin Board
Help and Support Forums => Aces High Bug Reports => Topic started by: flippz on August 03, 2017, 01:52:15 PM
-
any idea why this is happening?
-
never mind it does not show it in the film.
its like the plane gets locked and when I move my stick the pedals and the dash are rotating with the stick movements and not the plane. I can open the clipboard and its fine for a few minutes. when it starts back acting up I have to close then reopen the clipboard
-
ok confirmed 68dummy saw it as well he joined my planes and said it was like the pilot was doing 180s around the outside of the aircraft and the aircraft was stationary
-
seems to be the yak3 for me only, tried several other aircraft and none are doing it
-
dxdiag attached
-
Puff Puff Pass, you flew withxxxjcxxx too long! lol Sounds trippy :devil
-
The seat and foot pedals rotate inside of the cockpit directionally with control input, but plane stays on same axis. look to rear and it corrects , change direction and it happens again.
-
The F4u-1c while looking left will have unmatching aircraft surfaces. Example the aileron detaches and flies away form the wing. Or the aircraft's attitude wont match the view out the wing. Never seen this before,.
-
When I get near a base, I get these weird floating thingies. Moving the hat switch sometimes makes them go away. I made no changes to my system.
-
Same.
(http://i191.photobucket.com/albums/z207/Pimpzdog/ahss2_zps3zbbgfo9.png) (http://s191.photobucket.com/user/Pimpzdog/media/ahss2_zps3zbbgfo9.png.html)
(http://i191.photobucket.com/albums/z207/Pimpzdog/ahss3_zpsy4ugedzd.png) (http://s191.photobucket.com/user/Pimpzdog/media/ahss3_zpsy4ugedzd.png.html)
(http://i191.photobucket.com/albums/z207/Pimpzdog/ahss4_zpsivpuq2ld.png) (http://s191.photobucket.com/user/Pimpzdog/media/ahss4_zpsivpuq2ld.png.html)
-
Yes I saw the same things also when I was in the fm2, F4u and spit. When I was moving my head positions around a weird pilot image was covering up the views. Also at one time I was being covered up with bombs, it looked like I was sitting in a bomb bay. I also saw floating images like the ones listed above.
-
(http://i1334.photobucket.com/albums/w653/scottyd66/Mobile%20Uploads/IMG_20170803_191853291_HDR_zpseputp5yy.jpg) (http://s1334.photobucket.com/user/scottyd66/media/Mobile%20Uploads/IMG_20170803_191853291_HDR_zpseputp5yy.jpg.html). Same with PT boats when you turn them.... DX9 version
-
Fighters the cockpit rotates inside the plane when maneuvers are made, using look left down produces an niverted outside view of outside of plane. adjusting view to zoom puts wht looks like inside the engine bay or the rear epenage. the bombers view look left or right rear and drones disappear except for their control surfaces and bomb bay doors. use of bombsight mode renders a vertical view of the bomb bay then adjusting zoom. wirblewind when using pintel position turning machine causes the drivetrain, turret and body to separate and turn on a separate axis.
-
Puff Puff Pass, you flew withxxxjcxxx too long! lol Sounds trippy :devil
as much as I would love to blame this on xxxjcxxx I think my mind warp has extended much beyond his reach lol
-
I was attacking bombers and the engines of the bombers showed up on my spitfire...Have screenshots of it...Just not on phone :bhead
-
Need more information as this is proving difficult to duplicate.
1) What plane/vehicle were you in (screenshots would be nice).
2) What were you chasing, firing at, or whatever plane/vehicle was close to you.
3) Need a DXDIAG output.
Films are not going to show the issue.
-
Yep there is definitely a major graphic bug issue. I also noticed in the chat buffer that some of the letters show up in a different font until it goes up a bit then it changes back to the normal font.
-
(https://s1.postimg.org/ez64ea9jj/ahss8.jpg) (https://postimg.org/image/kal0yzvm3/)
-
Yep there is definitely a major graphic bug issue. I also noticed in the chat buffer that some of the letters show up in a different font until it goes up a bit then it changes back to the normal font.
The bottom row of my text buffer looks like italics - is that like what you're referring to? Its not really a different font though I think there is a slight sideways shift in aligment on the bottom row that makes it look like italics.
-
Here are the 2 films taken along with that screenie. Hope it helps.
-
How do you post the DXDIAG jawny jawn again?
-
System Information
------------------
Time of this report: 8/4/2017, 11:59:05
Machine name: KEITH-PC
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_ldr.170512-0600)
Language: English (Regional Setting: English)
System Manufacturer: ASUS
System Model: All Series
BIOS: BIOS Date: 03/25/14 09:58:23 Ver: 03.10
Processor: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (4 CPUs), ~3.4GHz
Memory: 8192MB RAM
Available OS Memory: 8098MB RAM
Page File: 2123MB used, 14070MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 64bit Unicode
------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: NVIDIA GeForce GTX 960
Manufacturer: NVIDIA
Chip type: GeForce GTX 960
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_1401&SUBSYS_85201043&REV_A1
Display Memory: 1666 MB
Dedicated Memory: 1969 MB
Shared Memory: 3792 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: VE248
Monitor Id: ACI2494
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: DVI
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 21.21.0013.7878 (English)
Driver Version: 21.21.13.7878
DDI Version: 11
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 3/23/2017 15:36:48, 16551672 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71E3E-5741-11CF-356D-2DA51BC2D835}
Vendor ID: 0x10DE
Device ID: 0x1401
SubSys ID: 0x85201043
Revision ID: 0x00A1
Driver Strong Name: oem15.inf:NVIDIA_Devices.NTamd64.6.1:Section024:21.21.13.7878:pci\ven_10de&dev_1401
Rank Of Driver: 00E62001
Video Accel:
-
Pup clipboard issues stop for me.
-
:headscratch: :headscratch: :headscratch:
-
These should all be fixed now. Thank everyone for bringing the data. It was very helpful.