Aces High Bulletin Board
General Forums => The O' Club => Topic started by: avionix on May 13, 2020, 08:32:39 AM
-
Did my part to stimulate the economy yesterday. First new car I have ever owned. Much better than the Honda Civic I was driving.
(https://live.staticflickr.com/65535/49890768632_cb2758a774_b.jpg)
-
I thought this post was going to be about an economy sim. Instead its just a Ford. :devil
Nice Truck.
-
ya got the right emblem on the grill
-
Got the problem circled. :D
Much better than a useless car.
-
where are fords made these days? Mexico?
-
where are fords made these days? Mexico?
Depends on the model. I know a lot of cars are made in Mexico but I believe a fair amount of trucks are made in the US, and I assume Mexico.
-
Fixed or repaired daily
Found on roadside dead
Bowties are best! :banana: :bolt:
Congrats!
-
I thought this post was going to be about an economy sim. Instead its just a Ford. :devil
Nice Truck.
I forgot the "t". Should have been stimulation. Although there are some here that might have seen "stimulation" for something much different than what I intended. :rofl
-
Fixed or repaired daily
Found on roadside dead
Bowties are best! :banana: :bolt:
Congrats!
Chevy:
Cheapest Heap Ever Visualized Yet
Can Hear Every Valve Yell
:rofl :rofl :rofl :rofl
Thanks!!!
-
Economy Stimulation - Going to the strip club for the night
-
Chevy:
Cheapest Heap Ever Visualized Yet
Can Hear Every Valve Yell
:rofl :rofl :rofl :rofl
Thanks!!!
Chevy says their trucks are like a rock - Which means when it stops rolling, thats where it will permanently sit...just like a rock :neener:
-
If you want to stimulate the economy help out where the market is hit hardest. If that's the auto industry, well okay.
I'd suggest a 20c.f. Frigidaire upright stuffed full of a side of beef, pork, and chicken. Meat will be scarce soon is what they keep saying.
Guard the bull.
-
where are fords made these days? Mexico?
Those trucks are assembled in Louisville, Kentucky and it is the ONLY U.A.W. assembly plant that does not allow alcohol or porn on site.
-
Did my part to stimulate the economy yesterday. First new car I have ever owned. Much better than the Honda Civic I was driving.
(https://live.staticflickr.com/65535/49890768632_cb2758a774_b.jpg)
I may be flying through yours and Steve’s shop in the coming week. If so I’ll holler
-
You had all that money. And didn’t buy a Chevrolet.
-
I’ve got four stud bulls guarded in my paddock with my 303 Lee Enfield. That Lee saw action during Operation Market Garden.
And we have a share on two calf’s in the field behind my house in my neighbors pasture. He’s got more rifles and ammo than a NRA convention in Tallahassee.
We’re good for now.
The emblem on my truck says that same as yours Avionx. Cept it weighs 5000lbs more and runs on diesel. :aok
-
I may be flying through yours and Steve’s shop in the coming week. If so I’ll holler
That would be great!!! Off last part of the week, but let me know what day and I will make it a point to come in anyway.
-
You had all that money. And didn’t buy a Toyota.
Fixed it for you.
-
Those trucks are assembled in Louisville, Kentucky and it is the ONLY U.A.W. assembly plant that does not allow alcohol or porn on site.
why would you have porn and booze on a car factory anyway?Helps pass the time ? I suppose you have to keep that right arm in shape/.
-
Chevy:
Cheapest Heap Ever Visualized Yet
Can Hear Every Valve Yell
:rofl :rofl :rofl :rofl
Thanks!!!
The competition is good natured, I've owned both. They're both just fine to do anything ya want, glad you got a new toy. Always fun to do!
-
I can say that I have never seen a Ford engine in a Camaro, but I have seen Chevy engines in Mustangs several times.
-
where are fords made these days? Mexico?
Got a sticker on the windshield and mine was made in the US. Missouri to be exact.
-
Got a sticker on the windshield and mine was made in the US. Missouri to be exact.
Assembled...... parts come from all over. As do parts for all cars and trucks today.
-
why would you have porn and booze on a car factory anyway?Helps pass the time ? I suppose you have to keep that right arm in shape/.
For example
The Avon lake assembly plant has two fridges full of beer, a wet bar, and a 100" projection screen showing hardcore porn.
-
Fixed it for you.
Nah.
-
After 2 x F150's the Ram 1500 is the best truck I had...……….
-
After 2 x F150's the Ram 1500 is the best truck I had...……….
Want to know how to mess up a cummins diesel,wrap it with a dodge truck. :devil
If I was going to buy a truck I'd get a toyota,frame issues aside. Brakes and tires are the only thing you need to fix,add in the appropriate oil changes.
:salute
-
Want to know how to mess up a cummins diesel,wrap it with a dodge truck. :devil
If I was going to buy a truck I'd get a toyota,frame issues aside. Brakes and tires are the only thing you need to fix,add in the appropriate oil changes.
:salute
Half ton is too small for my needs. I am debating going 1 ton on my next truck. Not sure I need it enough. My 3/4 ton does nicely, though I have had it loaded a few times........... LOL I tend to buy a truck and drive it for awhile. I am not one to go buy a new vehicle every year. I currently drive a 2005 2500HD crewcab 4WD. Had the Duramax gone through with a complete build. Puts down about 500hp and 1000 tq at the rear wheels..... just for pulling trailers. She could use a paint job as that white paint cancer that affected chevy, dodge, and ford back in those days has peeled in some areas. It does the job and that is all I care about.
Kind of eyeing a new GMC.
-
I hear you shuf,get the truck you need but I still would get a toy!
The paint peel issue is bad on some,changing to water base paints is a learning curve that most makers avoided... :devil But even the old enamels had issues,I've seen perfect hand prints show through,cause someone in the paintshop touched the car/truck with bare hands. When I built cars the paint shop had a big yellow line,gloves must be worn pass this line type thing. If you got caught without said gloves,you got written up and might even get a day or 3 off work.
Every maker has it's flaws,some just have many more than others!
:salute
-
I hear you shuf,get the truck you need but I still would get a toy!
The paint peel issue is bad on some,changing to water base paints is a learning curve that most makers avoided... :devil But even the old enamels had issues,I've seen perfect hand prints show through,cause someone in the paintshop touched the car/truck with bare hands. When I built cars the paint shop had a big yellow line,gloves must be worn pass this line type thing. If you got caught without said gloves,you got written up and might even get a day or 3 off work.
Every maker has it's flaws,some just have many more than others!
:salute
This is the only truck/toy I need!
(http://66.189.10.34:8080/pics/mustang_drivers_side.jpg)
-
Thought you were a "Jug" feller? :rofl OK, I get it....cant be a "Jug" guy without the right "Bait" :D These "Mustangs" like to run also!!!! At least they dont shoot at me :aok
-
This is the only truck/toy I need!
(http://66.189.10.34:8080/pics/mustang_drivers_side.jpg)
bring that toy of yours down here to NC and we can go down to Charlotte ZMax dragway....
I'll use Mom and Dad's old 2013 Impala LT with he 3.5 V6 front wheel drive..... and we can get someone to video tape it....
younger older 20's/early 30's neighbor lives down around the bend thought his stage 3 Rousch Mustang was all that
from dead stop by the time I hd done pegged the speedo past 140, it was taking him nearly a football field and a 1/2 to gain roughly an inch up on me at my drivers door
I saw a school bus coming from up around a curve a ways up and the first up coming little curve to the right was coming up fast with an old lady on my side of the 2 lane road, so i let off and hit the brakes to slow down, but he kept it floored and damn near caused a deathly wreck. he couldn't make his mind up to either pass the old lady or slow down behind her, he decided to pass her in the curve and barely had time to get over before hitting the school bus head-on.... I'm dang near sure he had to go change his drawers
he passed the turn in to where we lived because he couldn't get slowed down in time, but when he came back and passed the house he tooted his horn at me and waved, then boout 20 minutes later he came knocking on the door asking what the Impala had in it and how much did it cost me...he bout teared up when I opened the hood and showed him a stock 3.5 V6 with automatic 6 speed trans that was only putting out around 305 to 315 HP, rofl....
6 months latter he had him a 6.4 hemi Challenger, too funny
-
Never knew it was so damn hard to post a picture.......... :bhead My new Truck I got last Friday.
https://imgur.com/a/vm9xe7i
-
Got a sticker on the windshield and mine was made in the US. Missouri to be exact.
My F-350 6.7 Diesel Lariat says "Made In Kentucky"
-
About 2 moths ago my brother had his ZL1-1LE at Hennessey. They put the 850 package in. He likes it even more now.
Can't haul a trailer.
-
About 2 moths ago my brother had his ZL1-1LE at Hennessey. They put the 850 package in. He likes it even more now.
Can't haul a trailer.
Hennessy? bet that cost him couple handfuls of ounces of gold
LOL, can't haul a trailer
-
About 2 moths ago my brother had his ZL1-1LE at Hennessey. They put the 850 package in. He likes it even more now.
Can't haul a trailer.
:rofl
-
Chevy says their trucks are like a rock - Which means when it stops rolling, thats where it will permanently sit...just like a rock :neener:
:rofl :rofl :rofl