Aces High Bulletin Board
General Forums => Aces High General Discussion => Topic started by: The Fugitive on January 14, 2025, 07:51:43 PM
-
OK, I have been doing a bunch of testing with the film viewer. Mine crashes often and has odd layering issues.....
(https://i.postimg.cc/sXbTt8Xg/bad-film-view.jpg)
The water will sometime look like ribbons and sometimes the town or field tile will be standing on one of its edges.
Ive tried running in compatibility mode all the way back to XP. Ive tried different graphic setting and resolutions. Ive even loaded the game to an old laptop, clean and fresh, all default and still I get these errors. The film I grabbed the screen shot above from ALWAYS starts out with those textures and will always crash, but not at the same place.
I have installed AHII, and AHI and used those film viewers with the same issues.
Now, the only films I CAN run without issues are old ones. The newest I have is 2018 and those films seem to run fine. No graphic issues or crashes.
So my questions are Does anyone else NOT have these issues with the film viewer? Does anyone have films from 2019- present so I can test "when" the issues creep in.
At first I was thinking it was my computer. It is a bit old but it has some upgrades.
2012___i7-3770K @ 3.50GHZ (8cpus)____12 MB ram___GTX670
2018___ same CPU ____12 MB ram___GTX1060 6GB
2024___ same cpu ____24 MB ram___RTX 4060 Ti
But I have no trouble running the game either on the monitor or on the Quest 2
Once I found the films that ran Im thinking something has changed in the software. Now is it something to do with windows, or is there a code issue where the film viewer meshes with the game software. Did the game get updated at one point and the film viewer didnt get an upgrade to mesh right? I dont know.
Let me know if you guys have issues to and if anyone has some old films.
-
Let me know if you guys have issues to and if anyone has some old films.
I generally don't have any issues with film viewer weirdness unless I run ah2 films. I run Dx 11, dx9 gives me some weirdness in the arenas, haven't looked if I had filmed in the brief experiment to eliminate that 10 min stutter many of us experience.
If you go to page 24 in the films forum, you'll see posts with attachment symbols - those are .ahf films posted in early 2020... you can run them for your experiment. You can walk your way back to page 1 looking for .ahf files.
The earliest I have since I came back in '21 are some from early '22 up until recently, but again there are numerous forum posts containing .ahf files you can view.
Here's page 24 of the films forum: https://bbs.hitechcreations.com/smf/index.php/board,77.575.html
And on that page a bunch of KOTH films in this post: https://bbs.hitechcreations.com/smf/index.php/topic,398959.0.html
(edit: other than not loading the Koth terrain and starting in fuzeman's chute (he was observer) the films ran normally. I ran a few on other pages with no gfx glitching. I have a newer pc now (2023) but do not recall any glitching from my prior pc, either.
-
I ran a few of the KOTH films and they ran fine other than issues I think is caused by "god mode". Ill run some more to see what else I can find year wise.
I always run DX9 when filming, Ill switch to DX11 and run some films through squad night to see how they come out.
Thanks.
-
I don’t have these issues.
The last 6-8 mos in chase mode the plane won’t center if I move and come back to it. I have to use Snap and any number key to recenter it.
-
I wonder if the home key has any effect.
-
OK, lets add this craziness.... I uploaded a film to dropbox, was going to ask Shane to grab it and run it on his machine to see if I was grabbing good films but couldnt play them. I pasted the link to the file in a new window, downloaded it to my desktop....not the AH films folder.... and double clicked it. Film viewer loaded up and played the film fine. Closed the film viewer, went to the same film in my films folder and it played fine. Weird right?
Went to squad night tonight, ran the game in DX11 and filmed each sortie. After Squad Ops I picked a film and and played it and it was missing layers. Did the dropbox thing again and the films that had issues were all fine.
I dont get it :headscratch: :headscratch: :headscratch: :headscratch:
-
OK, lets add this craziness.... I uploaded a film to dropbox, was going to ask Shane to grab it and run it on his machine to see if I was grabbing good films but couldnt play them. I pasted the link to the file in a new window, downloaded it to my desktop....not the AH films folder.... and double clicked it. Film viewer loaded up and played the film fine. Closed the film viewer, went to the same film in my films folder and it played fine. Weird right?
Went to squad night tonight, ran the game in DX11 and filmed each sortie. After Squad Ops I picked a film and and played it and it was missing layers. Did the dropbox thing again and the films that had issues were all fine.
I dont get it :headscratch: :headscratch: :headscratch: :headscratch:
I wonder if an anti-virus is screwing with them. Different issue but I lost use of some files because of an AV. One reason I quit using them.
-
Read only?
-
Joe,
just out of curiosity have you tried opening the films directly from the the films folder, without launching the film viewer first.
:salute
-
I wonder if an anti-virus is screwing with them. Different issue but I lost use of some files because of an AV. One reason I quit using them.
I suppose its possible, but I have had the same antivirus for ever and these issues are something that has cropped up in the past few years.
Read only?
I check a number of films and none of them have "read only" or "hidden" box checked in the properties.
Joe,
just out of curiosity have you tried opening the films directly from the the films folder, without launching the film viewer first.
:salute
I didnt reboot may machine last night. At this point it doesnt matter how I open the film they all seem to be working ok.... well the half dozen I have run. Im pretty sure that I had the issues opening films either way (double clicking the film file in the "films" folder, or opening them from the film viewer program).
Im finishing up another video but once I reboot this machine Ill see if it goes back to having graphic issues.
-
I suppose its possible, but I have had the same antivirus for ever and these issues are something that has cropped up in the past few years.
I check a number of films and none of them have "read only" or "hidden" box checked in the properties.
I didnt reboot may machine last night. At this point it doesnt matter how I open the film they all seem to be working ok.... well the half dozen I have run. Im pretty sure that I had the issues opening films either way (double clicking the film file in the "films" folder, or opening them from the film viewer program).
Im finishing up another video but once I reboot this machine Ill see if it goes back to having graphic issues.
Try this, send files to shane again, turn off AV, have him send them back, see hiw long they last,
AVs update too. Used AVG for yrs, software files I write myself stopped working until I figured it out, shut it off, and they because useable again.
AVs mark files, or copies of files to mark them while on your pc. Sending them to shane may be clearing that, until AV sees them again
Something is disrupting data. IF AV is marking those files the AHFV could be reading them in the data stream and not knowing what to do with those characters. Could also be malware detections.
Wirth a shot
-
OK, here is an update....
Im beginning to think it may be my video card. From the response to this thread this is not a problem for a bunch of you, so it mine computers issue.
My work around is to upload a film (doesnt matter which one) to dropbox. Copy the link to the file. Open a new tab, paste the link and download the film to my desktop. Play the film either by double clicking to launch the film viewer, or open the film viewer manually and "open" the film from the drop down box in the film viewer. The film will play ok....water still sometimes has an issue.
Once I have done that I can play pretty much any film I have with out issue. Jumping from player to players in the film, or using chase or exterior views has a time limit and will crash the film viewer. Once the film viewer starts crashing restarts will not fix it and I must reboot the computer. After a reboot I must do the upload/download routine again to get the films running right again.
I am going to load up a temp sensing program and keep it open on a second screen to monitor temps to be sure that is not an issue. I am running an RTX 4060 Ti
-
My film viewer was crashing as I was physically moving the bar to later moment in the film. Especially on my larger films.
-
I have more oddities now than 1 yr ago.
Since I don’t usually see software updates I recklessly assume something in changing in the game. They didn’t come all at once, they seemed to have dripped in 1 by 1.
-
My film viewer was crashing as I was physically moving the bar to later moment in the film. Especially on my larger films.
I get that one too once in a while.
-
My film viewer was crashing as I was physically moving the bar to later moment in the film. Especially on my larger films.
Mine has always hated that, even in AH2
-
The film will play ok....water still sometimes has an issue.
I believe I get more water/terrain level issues and crashes when seeking if I re-planed or switched towers in the same film.
-
I believe I get more water/terrain level issues and crashes when seeking if I re-planed or switched towers in the same film.
Check your PMs please. <S>
-
Mine crashes all the time. I can play 3 or 4 sometimes. Usually, it is only one or 2. Then either the same odd layering or just get to a point and crash. Come back later and it will run just fine. Been happening for years now. I quit griping about it and must have just got used to it.