Aces High Bulletin Board

General Forums => Aces High General Discussion => Topic started by: Maineac1 on February 04, 2026, 07:51:25 PM

Title: New joystick
Post by: Maineac1 on February 04, 2026, 07:51:25 PM
Disregard   figured it out
Title: Re: New joystick
Post by: Maineac1 on February 05, 2026, 05:21:53 AM


   new computer.   same old VKB Gladiator stick.   Now in the game I can't get the stick hat switch to work.   the game didn't recognize the AXIS inputs immediately.   Anyone have issues with things like this?   I know nothing of any drivers that need to be added.   I didn't on my previous old,  old computer.    suggestions?
Title: Re: New joystick
Post by: Shane on February 05, 2026, 08:18:00 AM

   new computer.   same old VKB Gladiator stick.   Now in the game I can't get the stick hat switch to work.   the game didn't recognize the AXIS inputs immediately.   Anyone have issues with things like this?   I know nothing of any drivers that need to be added.   I didn't on my previous old,  old computer.    suggestions?

Did you try running calibration software?  When mine arrived a couple weeks ago, the 8-way was "off"   figured I needed to run the calibration software - fixed it.
Title: Re: New joystick
Post by: Maineac1 on February 05, 2026, 08:41:04 AM


   I did the calibration part in game and thru Set up game controllers.   didn't recognize the hat switch.    is that what you're saying?

thanks for reaching out
Title: Re: New joystick
Post by: Bolt on February 05, 2026, 08:51:53 AM
If you downloaded the VKB config software, you can check to see if the switches are set correctly. You can even change them to different type of switch if you want. Like Shane said, may have to check in the VKB software first before it reflects in AH3. Hope that helps brother  :cheers:
Title: Re: New joystick
Post by: Shane on February 05, 2026, 08:59:51 AM

   I did the calibration part in game and thru Set up game controllers.   didn't recognize the hat switch.    is that what you're saying?

thanks for reaching out

VKB's own software....   https://www.vkbcontrollers.com/pages/downloads  (VKBDevCgf Device configurator)

There might be other things on that page you can try, but I'd start with the calibration.
 
Here's a video walkthru:  https://www.youtube.com/watch?v=NTZNUT8wmOA

It was easy enough for what I needed "fixed"  - hope it helps you.

Title: Re: New joystick
Post by: AKIron on February 05, 2026, 12:47:39 PM
You might try running the "Set up USB Game Controller" app built-in to Windows and see if the function works there. If not then back to the VKB software. If it does work there then back to AH config.
Title: Re: New joystick
Post by: Max on February 05, 2026, 12:51:12 PM
Having a Gladiator NXT Evo that hasnt't been calibrated with the VKB software I ran the process...only to find all my joystick assignments empty when reloading AH3. I keep a current SETTINGS folder backup so I copy and pasted back to the exe folder...they're still missing. Now what? aside from reassigning everything one at a time?
Title: Re: New joystick
Post by: Shane on February 05, 2026, 01:12:03 PM
Having a Gladiator NXT Evo that hasnt't been calibrated with the VKB software I ran the process...only to find all my joystick assignments empty when reloading AH3. I keep a current SETTINGS folder backup so I copy and pasted back to the exe folder...they're still missing. Now what? aside from reassigning everything one at a time?

I dunno if there's a way to save stick mappings via VKB itself...  I did the calibration while I had some keys already mapped (I was struggling with an off centered 8-way hat) and it kept all the settings I had in place.... I see the  vkbsimgladiatorevor.jsm  file (the mapping in my settings folder) so unsure why they wouldn't get re-applied.
Title: Re: New joystick
Post by: Randy1 on February 05, 2026, 02:44:09 PM
When I first used my VKB, I did not calibrate the joystick or hat in the VKB software.  I set everything up in AH then I had problem with the hat.   After downloading the software then going through the calibration, no more problems.
Title: Re: New joystick
Post by: Maineac1 on February 05, 2026, 03:44:02 PM
When I first used my VKB, I did not calibrate the joystick or hat in the VKB software.  I set everything up in AH then I had problem with the hat.   After downloading the software then going through the calibration, no more problems.

  Im not so lucky as of yet.    Oddly,  in stick mapping I have 2 Y-axis,  2 X-axis and 2 Z-axis.   At one point I got the hat switch to work but the 3 axis all stopped and didn't accept new mapping.    I hate being the old man in the modern age of gaming
Title: Re: New joystick
Post by: Shane on February 05, 2026, 05:58:55 PM
  Im not so lucky as of yet.    Oddly,  in stick mapping I have 2 Y-axis,  2 X-axis and 2 Z-axis.   At one point I got the hat switch to work but the 3 axis all stopped and didn't accept new mapping.    I hate being the old man in the modern age of gaming

Hope you get it figured out - there are other trouble shooters on that page.  Maybe it's a spazzy usb port?
Title: Re: New joystick
Post by: JimmyD3 on February 05, 2026, 06:41:59 PM
I have VKB rudder pedals, every now and then I loose the input entirely. I disconnect the usb port and reconnect and everything works fine, till the next time.
Title: Re: New joystick
Post by: Animl-AW on February 05, 2026, 06:43:04 PM
I have VKB rudder pedals, every now and then I loose the input entirely. I disconnect the usb port and reconnect and everything works fine, till the next time.

Does this happen while you're playing?
Title: Re: New joystick
Post by: JimmyD3 on February 05, 2026, 06:48:42 PM
Does this happen while you're playing?

Not sure, it happened the other day in game, I think. I have all my HOTAS and pedals attached to a USB hub, with each input having a on/off switch. I happened to look at it while doing this thread earlier and it was off then.  :rolleyes:
Title: Re: New joystick
Post by: Animl-AW on February 05, 2026, 06:59:55 PM
I started to use the software for calibration then scratched it, I just made sure the stick was working in it and Windows and AH took it right off the bat.

A lot of these stick software are not really needed, many times just the driver is needed....you're going to map it in AH.

I did have to invert axis in AH.

AH Settings folder will save your VKB mapping. I've already done it once.
Title: Re: New joystick
Post by: Molsman on February 05, 2026, 08:40:41 PM

   new computer.   same old VKB Gladiator stick.   Now in the game I can't get the stick hat switch to work.   the game didn't recognize the AXIS inputs immediately.   Anyone have issues with things like this?   I know nothing of any drivers that need to be added.   I didn't on my previous old,  old computer.    suggestions?

I never had those Issue's with my VKB stick and or Rudder the game picked everything up when I plugged it into my power usb hub.
Title: Re: New joystick
Post by: Randy1 on February 06, 2026, 01:44:39 PM
  Im not so lucky as of yet.    Oddly,  in stick mapping I have 2 Y-axis,  2 X-axis and 2 Z-axis.   At one point I got the hat switch to work but the 3 axis all stopped and didn't accept new mapping.    I hate being the old man in the modern age of gaming

Thinking  back to my original AH setup with the VKB.  The VKB in AH control setup shows the hat as buttons, and a hat switch.  The hat switch setting are at the bottom of the list of buttons.  Use the hat switch settings.  i hope i remembered this right.