Aces High Bulletin Board
General Forums => Hardware and Software => Topic started by: Randy1 on May 13, 2026, 02:06:41 PM
-
Anybody tried the WW2 VKB throttle?
https://vkbsimcontrollers.com/products/gnx-wwii-throttle-combo-us (https://vkbsimcontrollers.com/products/gnx-wwii-throttle-combo-us)
-
Anybody tried the WW2 VKB throttle?
https://vkbsimcontrollers.com/products/gnx-wwii-throttle-combo-us (https://vkbsimcontrollers.com/products/gnx-wwii-throttle-combo-us)
No
But I think I made a mistake buying the vkb spect space throttle. It’s just too big and tall compared to x52 throttle. Ya need gorilla hands.
May sell it and get a different model. Works great, just not my style. Prolly go WWII model
-
No
But I think I made a mistake buying the vkb spect space throttle. It’s just too big and tall compared to x52 throttle. Ya need gorilla hands.
May sell it and get a different model. Works great, just not my style. Prolly go WWII model
I have the STECS Standard and I agree, it is huge and the range of motion seems double compared to the X52 throttle. It also sits on my desk, which adds to the range of motion issue. If it were attached to my chair I think it'd be a lot different...maybe one day.
-
I have the STECS Standard and I agree, it is huge and the range of motion seems double compared to the X52 throttle. It also sits on my desk, which adds to the range of motion issue. If it were attached to my chair I think it'd be a lot different...maybe one day.
Ya, disappointed in all you stated.
Only thing I can come up with is a mount that lowers it 2” and puts a 20 degree tilt to it. The palm rest I feel like cutting off, but ya know…,
Good thing my grip tilts that helps.
Holy crap, to change spring ya gotta take most of it apart.
First VKB I’m not fond of the design.
You talked me into vkb, still glad I listened.
-
Anybody tried the WW2 VKB throttle?
https://vkbsimcontrollers.com/products/gnx-wwii-throttle-combo-us (https://vkbsimcontrollers.com/products/gnx-wwii-throttle-combo-us)
I currently use one and like it. I have it bolted onto my Gladiator. I have this combo front and center on the desktop with a tiny little C-clamp holding it in place.
I was using a STECS along with the fancy all metal Gunfighter and some VKB rudders as well but I just couldn't get used to all of that. I tried the mounts and all but I was so used to using a Sidewinder 3D Pro (many of them actually) from the 90's front and center on the desktop that I switched to this combo and I'll sell the other stuff. The STECS, MKV rudders and Gunfighter are high quality items but just don't fit my style of play.
I'm assuming you have a Gladiator so the WWII throttle is a breeze to attach.
Since changing to this combo a couple weeks ago, I've noted marked improvement in my overall skill. I've gone from pure crap to somewhat lame. I'm hoping to achieve non-cringe fairly soon.
PM your address and I'll send you one for nothing, Randy. I ordered one and it got lost in transit so VKB was nice enough to send another. Low and behold, the original showed up the other day.
-
"Sidewinder 3D Pro"
I used that in the 90s too. It was actually a good stick.
-
"Sidewinder 3D Pro"
I used that in the 90s too. It was actually a good stick.
I briefly used a CH stick that AKAK gave me after winning a P-38 duel tourney thing at the AW98 Con. Other than that it was the 3D Pro or FFB Pro until about 2019 when the last of about 5 of them had too much slop.
I traded the CH stick to Damned Zippo for a FFB Pro. Kinda regret that now as the CH was from AKAK.
-
I have the STECS Standard and I agree, it is huge and the range of motion seems double compared to the X52 throttle. It also sits on my desk, which adds to the range of motion issue. If it were attached to my chair I think it'd be a lot different...maybe one day.
I have a STECs...got a desk stand for it off Amazon...it fits just well enough because of gigantic the throttle base is. However, I love the dual throttle, I love how many buttons and switches and dials it has. Plus, it feels solid. I have the WW2 stick and I love it. The ww2 throttle looks good, just less buttons and stuff.
-
Greatly appreciate the feedback.
The attraction to this throttle is the Hall effect sensors. The WW2 throttle is resistance sensor. But as y'all posted the button spread is quite large.
https://vkbsimcontrollers.com/products/gladiator-nxt-evo-omni-throttle-left-hand-us (https://vkbsimcontrollers.com/products/gladiator-nxt-evo-omni-throttle-left-hand-us)
-
Greatly appreciate the feedback.
The attraction to this throttle is the Hall effect sensors. The WW2 throttle is resistance sensor. But as y'all posted the button spread is quite large.
https://vkbsimcontrollers.com/products/gladiator-nxt-evo-omni-throttle-left-hand-us (https://vkbsimcontrollers.com/products/gladiator-nxt-evo-omni-throttle-left-hand-us)
Basically, all different levels of vkb use the same base for that level. They all work great and smooth. The grip itself comes down to personal preference.
The Space throttle would be ok if it weren’t so tall. I could get by the grip size if lower and tilted back.
This screwed me up in I was going to hinge the flat board mount to swing under the desk top. With it’s size I have to rethink it.
-
I have a STECs...got a desk stand for it off Amazon...it fits just well enough because of gigantic the throttle base is. However, I love the dual throttle, I love how many buttons and switches and dials it has. Plus, it feels solid. I have the WW2 stick and I love it. The ww2 throttle looks good, just less buttons and stuff.
Got a link? I've thought about doing the desk thing, I've seen them where you can make the whole throttle and stick flip under the desk and it remains plugged in. That would be nice because I unplug both every time I'm done for the week. I have an el cheapo desk, so not sure how well it would work.
-
I built my own.
Stowed
(https://i.postimg.cc/C54tkp45/controls-stowed.jpg)
Half way open
(https://i.postimg.cc/RhmyWZK2/controls-halfopen.jpg)
Open
(https://i.postimg.cc/y6h2w0zK/controls-up.jpg)
Since these pictures I have changes both the stick and pedals to VKB, but all my stuff stays plugged in and cables are supported so no wear and tear on the cables or plugs.
-
I built my own.
Stowed
Since these pictures I have changes both the stick and pedals to VKB, but all my stuff stays plugged in and cables are supported so no wear and tear on the cables or plugs.
Nice, Fugi. Very crafty thinking there.
-
If it’s hinged under the desk, which I have done before, be sure those cables are secured stationary at both ends, and/or strain relief on connectors. You can use ellastic string to pull excess cable out of the way when hinged under. The cable is going to move and twist more than a stationary install. Every time a cable moves it’s wearing out.
I gave to shop or think of a new idea to accommodate the Stec Space throttle size. <grumble>
So ya Bolt, if ya have a link to an idea post it.
-
Ya I just an idea from Fugi to consider. Not the same, but similar.
-
Got a link? I've thought about doing the desk thing, I've seen them where you can make the whole throttle and stick flip under the desk and it remains plugged in. That would be nice because I unplug both every time I'm done for the week. I have an el cheapo desk, so not sure how well it would work.
Ya that can/will wear out cables/connectors, for sure.
-
https://a.co/d/0aZDAAL0
This is the link for the under the desk mount I use...like I said, for the throttle you will only be able to screw in the front because the throttle base is huge, if you go with STECs. I've flown two scenarios and couple FSOs and it has held up no problems. Also the dual throttle sure comes in handy for the 38, especially when trying to rope a dope :rofl :salute
-
I used my Warthog stick mount for my Virpil throttle. Just stuck it on with some 3M VBH double sided a year and a half ago and it hasn't budged.
(https://i.postimg.cc/Z90Bf3HR/throttle.png) (https://postimg.cc/Z90Bf3HR)
-
3d printed my detent. Didn't like the original.
-
https://a.co/d/0aZDAAL0
This is the link for the under the desk mount I use...like I said, for the throttle you will only be able to screw in the front because the throttle base is huge, if you go with STECs. I've flown two scenarios and couple FSOs and it has held up no problems. Also the dual throttle sure comes in handy for the 38, especially when trying to rope a dope :rofl :salute
Thats what I’m looking for. Except I want them mounted to a single board with a piano hinge so they and KB flip under and hang 180 degrees. instead of clamps actually mounted.
I now see I can just have a Z shaped plate made at a local steel shop for a few dollars.