Aces High Bulletin Board
Help and Support Forums => Technical Support => Topic started by: DRILL on April 25, 2002, 03:45:54 PM
-
any one else get 1/2 sec to sec min freezes ??? scents i put in the new patch i seem to get them ..when i never had them before :(
talked to a few others they say they get em anyone got any idea's ??
-
Sometimes I do, but it only happens when i pull the trigger with cons around, it just pauses really fast before the tracers come, pretty strange, but still playable on my end
-
Any ideas? I get it bad whenever I pull the trigger. Makes it darn difficult to play. If I pull the trigger, the screen freezes for at least a 1/2 second, and then I'm dead....
-
I sometimes get that when I start the recorder.
-
If you guys provide system details, OS version, and driver version information it would help. With no info to work with, it makes it pretty hard to give you any advice.
-
guess i didnt put the info in sorry
AMD ATHON 1.4
GF3 2311 drivers
512 ram
win 98 se
DX 8.1
iv updated all the drivers still get mini freezs
-
When I get the mini-freeze that DRILL is getting a defrag seems to help. I am running the same OS,vid card, procceser, 256meg of ram
Shamus
-
If the freeze occurs when u fire guns.. do this...
Control Panel
Multimedia
audio
advanced properties
performance tab
Move the hardware acceleration slider 1-2 notches to the left
test, and adjust
SKurj
-
Thanks Skurj, I'll do that. I'm also going to update my video drivers.
Edit:
System specs:
P4 1.5ghz
geforce2 32mb GTS
256 mb RAM
40gig HD
-
I rarely get minifreezes, but I do get them. Do any of you change the primary guns? I've noticed REAL wacky stuff when I try that.
Duron 750 o'cked to 850
128 Ram [soon to go up to 256 I hope]
Abit KT7A
GeForce2MX O'clked about 10%
[IF remember to before I run game]
[running 14.20 Det w coolbits enabled using 2 files from 14.21]
Win98se
fuzeman
-
> BUMP < ..................^
-
fuze?
change primary guns? no sure what you mean...
i map primary to b2 on my stick.. and use mitsu's sounds..
SKurj
-
Originally posted by SKurj
fuze?
change primary guns? no sure what you mean...
i map primary to b2 on my stick.. and use mitsu's sounds..
SKurj
The \ key is the 'Select Primary Weapon' key and it seems to switch the gun used as the 'Primary' gun. On the P51 it changes the primary from the inboard singles to the outboard dual .50s.
When I do that, I sometimes got wacky results, guns firing without graphic flashes, sound, etc. I'm not really sure when that key would be used and I should probably just unmap it on my Joystick. I do have the fire secondary and fire both which I do use.
I can try it again and let you know exactly what happens, when I select a different primary gun. I'm not sure if it acted differently only when rockets and bombs were loaded but I had them loaded when I reverified the 'wackiness' before I posted this.
fuzeman
-
well i fixed my little frees so far iv not had them .. i updated my drivers to 28 90 i think it was and have np .
-
Heh, now do me a favour... never "upgrade" drivers again! :)
Seriously... if you have it all working fine, I would stay with these drivers until you are absolutely forced to change. Don't try newer ones in the hopes of a speed increase.... because in my experience the tiny increase always comes with increased risk of problems.
Thanks for the update... I'll recommend the 28.90's to others if they have similar problems.