Aces High Bulletin Board

General Forums => Aces High General Discussion => Topic started by: Hortlund on August 10, 2002, 04:06:52 PM

Title: Testing of the damage model
Post by: Hortlund on August 10, 2002, 04:06:52 PM
I did some testing together with a squaddie in the DA.

The testing was done with a M3 for .50cal, a PzIVH for 7.92 (and as target), and an Ostwind (as target).

Method:
The two vehicles are driven so they stand front to front approx 100 yards away from each other.

I have film of all these events in case someone wants it or doesnt believe me or whatever.

The idea is I'll return to this post and update it the more testing I get done.


Effects of the current damage model:

7.92mm MG can penetrate and destroy the tracks on a PzIVH.

7.92mm MG can penetrate front turret armor and destroy turret on a PzIVH

7.92mm MG can penetrate front hull armor and destroy bow MG on a PzIHV

7.92mm MG can penetrate and destroy tracks on Ostwind

7.92mm MG can penetrate and destroy Ostwind turret from the front

7.92mm MG can penetrate concrete building and rubble it

.50cal can penetrate and destroy tracks on PzIVH

.50cal can penetrate front turret armor and destroy turret on PzIVH

.50cal can penetrate front hull armor and destroy bow MG on PzIVH

.50cal can penetrate concrete building and rubble it
Title: Thanks Hortlund.......
Post by: eddiek on August 10, 2002, 04:31:55 PM
There are obvious flaws in the GV damage model, as you have proven here.
HT said in a reply to brady that the bullets either penetrate or not.  I'd like to see the MG bullets riccocheting off the armor personally.  Kind of a reminder of the futility of using an ineffective (supposed to be anyways) weapon to attack a heavily armored tank.
Title: Testing of the damage model
Post by: Innominate on August 10, 2002, 05:20:22 PM
It's funny how the open turret of the ostwind seems to be as durable as the armored turret of the panzer.
Title: Testing of the damage model
Post by: brady on August 10, 2002, 05:34:43 PM
Well done Hotland and TY for doing this. Is It me or is the Armor on the front of the PAnzer IV:

  Turet 50mm
  Hull 80mm

  Both sloped at at least 10 degrees

 Osty turet Armor is 16mm and sloped at 37 degrees.

 Now under only the most favorable conditions can a 50 cal theroticaly penatrate the to plating on these tanks which is 15 on the turet top, and 12 on the hull.

 How is that 50 cal round acheaving a penatration when it is physicialy imposable for it to so?

 The Osty turet is Open toped, rounds NOT coming from the TOP have to hit the sides of the turet and therefor have no chance of geting in, because they are not coming from above.Also the extream slope of the osty turet enhances it's efective armor thickness considerably.


    The Tracks on the Tanks are extreamly vulernable to MG fire, historical they were not, thats why they had steal tracks and not wheals:)
Title: Re: Thanks Hortlund.......
Post by: Hortlund on August 10, 2002, 05:53:51 PM
Quote
Originally posted by eddiek
There are obvious flaws in the GV damage model, as you have proven here.
HT said in a reply to brady that the bullets either penetrate or not.  I'd like to see the MG bullets riccocheting off the armor personally.  Kind of a reminder of the futility of using an ineffective (supposed to be anyways) weapon to attack a heavily armored tank.


Actually alot of the bullets do riccoschet (how do you spell that word anyway) off the armor. It's not like a 3 second burst with 7,92 will take out the turret of a Pz, it takes more like a 400 round burst.
Title: Testing of the damage model
Post by: mauser on August 10, 2002, 05:58:48 PM
Good job Hortlund, thx for taking the time and conducting a test.  These results make discussions a lot "cleaner."  

mauser
Title: Testing of the damage model
Post by: Toad on August 10, 2002, 10:22:40 PM
There ya go. That's all that's needed really, isn't it?
Title: Testing of the damage model
Post by: hitech on August 11, 2002, 10:16:05 AM
7.92mm MG can penetrate front turret armor and destroy turret on a PzIVH

Just wondering, do you meen the gun just stoped working? If so thats not a armor penitration.
Title: Testing of the damage model
Post by: Hortlund on August 11, 2002, 12:08:36 PM
The thing I'm calling turret penetration is when the turret turned red on the damage display, the tank started smoking and it was not possible to use the gun anymore.
Title: Testing of the damage model
Post by: hitech on August 11, 2002, 02:41:34 PM
Rgr just want to clarify,the main gun can be destroyed with out penitrating the turrent.

Same with the hull gun.
Title: Testing of the damage model
Post by: Sandman on August 11, 2002, 02:49:32 PM
Good info Hort. Thanx.

It's "ricochet." :)
Title: Testing of the damage model
Post by: Hortlund on August 11, 2002, 02:59:15 PM
Quote
Originally posted by hitech
Rgr just want to clarify,the main gun can be destroyed with out penitrating the turrent.

Same with the hull gun.


Oh, ok.
So what I'm seeing is not a penetration of the turret or hull armor, but rather a destruction of the main gun or bow mg?
Title: Testing of the damage model
Post by: BenDover on August 11, 2002, 07:10:24 PM
wait a sec!


how does a bullet take out the gun without penitrating, clog the barrel with red:rolleyes:


oh, and the hull gun CAN be taken out?
Title: Testing of the damage model
Post by: brady on August 11, 2002, 07:26:41 PM
OK, this seams a bit far fetched, I can See maybe a few rounds hitting the gun barel and damaging it, the MG gun barel, the Coax gun barel does not realy penatrat the gun mantel on the Panzer, so hitting it would be a 1000 to one shot.

 The MA on the Panzer 4 is being damaged how by MG fire?

 The tiny apature for the gun sight ( like 1 inch big) is taking a direct hit? and going into the tank? You mean like that sean in that Sniper movie whear the bulit goes through the scope and into his eye?

 In the pictures of German tank turets aranged around the inside of the turet( and the rest of the tank) are clips and boxes containg spare Vishion blocks( perescopes) and I beleave their are extrar sights for the bow and MA gun's.

  Hortland what of the rear armor facing have you done test on that?

  During MA engagements I have taken out Tank engines with the MG 34, how is this posable?

 Also what of the imobalazation issue by MG fire?
Title: Testing of the damage model
Post by: SKurj on August 11, 2002, 11:34:55 PM
Panzers also had a heavy mantle i believe it was called where the main gun met the turret usually with heavier armor than the rest of the turret,,

SKurj
Title: Testing of the damage model
Post by: Hortlund on August 12, 2002, 02:04:53 AM
I'm gonna do 7.92mm mg and .50cal vs side and rear armor tests later today.
Title: Testing of the damage model
Post by: Saintaw on August 12, 2002, 02:06:55 AM
Whutsat Toad? I smell irony in your answer... can one not disagree with the mighty lord & show us that there's a flaw in the game ?
Title: Testing of the damage model
Post by: brady on August 12, 2002, 02:35:13 AM
This Picture of an Ausf J ( basicaly the same as an H) Gives a good picture of the Gun Mantel.
Title: Testing of the damage model
Post by: brady on August 12, 2002, 02:42:36 AM
Some Number's Auf G armor figures (basicaly the same for our "H")

 Front Turret: 50/11
Front Upper Hull: 50 or 50+30/10
Front Lower Hull: 50 or 50+30/12
Side Turret: 30/26
Side Upper Hull: 30/0
Side Lower Hull: 30/0
Rear Turret: 30/10
Rear Upper Hull: 20/12
Rear Lower Hull: 20/9
Turret Top / Bottom: 10/83
Upper Hull Top / Bottom: 12/85
Lower Hull Top / Bottom: 10/90
Gun Mantlet: 50/0

 The "H" we have stadardised the 50+30 for the 80.

 The "/" refers to the armor/angle

 I wounder how much enegery is lost when the MG rounds pass through the skirts.
Title: Testing of the damage model
Post by: Hortlund on August 12, 2002, 02:43:47 AM
Guys, I dont think anyone is arguing that a 7.92mm bullet should be able to take out the main gun of a PzIVH or the bow MG.

The results are interesting though, because it shows that the front turret and front hull armor has not been penetrated by the 7.92mm or .50cal bullets.

It would appear that the PzIVH armor model protects the turret and the hull, but the gun and the mg is not protected by said armor model.

As for the tracks, I dont think anyone is arguing that a 7.92mm bullet or .50 cal bullet should be able to detrack a PzIVH either. The most probable reason for the damage to the tracks is that the tracks are not considered armored, but that is just my speculation.

It will be interesting to see if the 7.92mm or .50cal can take out the engine from the side and rear though.
Title: Testing of the damage model
Post by: brady on August 12, 2002, 05:31:32 AM
Yes Hortlund I eargely await your test results, I have done this in action in the MA but your test are the proof:) ty again for taking the time to do this, If I can Help please E mail me.

     bradys5@hotmail.com
Title: Testing of the damage model
Post by: Toad on August 12, 2002, 07:43:05 AM
Quote
Originally posted by Saintaw
Whutsat Toad? I smell irony in your answer... can one not disagree with the mighty lord & show us that there's a flaw in the game ?


No, not at all. You're trying to read something that isn't there.

I saw that Hortlund actually took the time to do a little work and post the results. I figured that might actually accomplish something. I posted a compliment to Hort for his approach. If you see something else, it's in your eyes.

 And, indeed, ~ 18 hours later HT himself showed interest.

Go figure, eh?
Title: Testing of the damage model
Post by: Saintaw on August 12, 2002, 09:30:15 AM
Thx for clearing my brain out Toad, I should have learned not to post before the 1st morning coffee, sorry :)