Aces High Bulletin Board
General Forums => Aircraft and Vehicles => Topic started by: icemaw on November 23, 2002, 01:56:55 AM
-
Sure would like to have the throttle in GV's stay full after you release pressure on the stick. Or even better have throttle controlled by my ch throttle. Its a drag having to hold stick forward for max speed. Arm gets tired on them long drives.
-
If you have a CH stick u can turn the trim wheal forward.
I think you can map that function to the throtel as well.
-
Originally posted by brady
If you have a CH stick u can turn the trim wheal forward.
I think you can map that function to the throtel as well.
Never thought of this, wonder if it works with a Couger?
Either way I agree with iceMAW, It should be like a gas pedal.
Booky
-
With my joystick, the worlds best a Wingman Interceptor, i push forward then go to a gun and it keeps throttle on.
-
So does mine however I lose about 5mph when doing that
-
it also dies on a steep 1st gear climb
-
I accelerate up to cruising speed, then switch to another gun position, like the turret or a pintle gun. My vehicle maintains speed as if I was pushing on the stick. Additionally, you can steer from the other gun positions using rudder.
-
This is my biggest gripe about AH, (Hey... I'm easy to please) :D
Why can't HTC just make the GV control system the same as the PT boat? You can jump to a gunner position in a PT and use Rudder to Steer (Like GV's) but also the throttle is controlled by...... Yup you've guessed it.... the Throttle :rolleyes:
So with a PT you can jump between all positions and still have full control of the boat. The only thing you cannot do is change gear and I don't even see why that is a problem as the keys do not conflict with a gunner position anyway. C'mon HTC you know it makes sense.
Just my 2c
TTFN
snafu
-
Originally posted by Booky
Never thought of this, wonder if it works with a Couger?
Either way I agree with iceMAW, It should be like a gas pedal.
Booky
the cougar has excellent trim functions. this is my hat 4 config:
BTN H4U /U /H Trim_Elev_Up
/M Toggle_Icons
/D /I HOLDTRIM (JOYSTICK)
/O Select_Engine_1
BTN H4D /U /H Trim_Elev_Down
/M /H Trim_Elev_Down
/D /I {TRIM (JOYX, 0) TRIM (JOYY, 0)}
/O Select_Engine_3
BTN H4L /U /H Trim_Aileron_Left
/M /H Trim_Aileron_Left
/D /I LOCK (THR, LASTVALUE)
/O Select_Engine_2
BTN H4R /U /H Trim_Aileron_Right
/M /H Trim_Aileron_Right
/D /I UNLOCK (THR)
/O Select_Engine_4
so, if I set the dogfight switch on the throttle to D, and hold S4 button down while pressing Hat4 up the position of the X and Y axises are held until I press S4 and Hat4 Down. I have the same for to hold lock the throttle when bombing, so I don't accidentally change speed...
-
Wow...space shuttle prolly less complicted