Aces High Bulletin Board

General Forums => Hardware and Software => Topic started by: AtmkRstr on March 14, 2003, 04:58:13 PM

Title: CH Pro Peddals Cleaning
Post by: AtmkRstr on March 14, 2003, 04:58:13 PM

Does anyone know of a online instructions to disassemble and reassemble CH Pro Peddals?

I've got to clean some dirt off the rollers in my peddals, but last time I took them apart it took me 20 mins, a flashlight and a bent clothes hanger to get them back together again.  There's got to be a better way.

Title: CH Pro Peddals Cleaning
Post by: capt. apathy on March 14, 2003, 05:34:37 PM

20 mins, a flashlight and a bent clothes hanger to get them back together again. There's got to be a better way.
______________
no, thats pretty much how you do it.  
one good hint is use one of those hot-glue guns to hold the wires in place. just put a dab where you want the wires to go and push them into it before it cools.  you still have to line up the linkage and springs and such, but at least you wont have to worry about pinching a wire when closing it up

Title: CH Pro Peddals Cleaning
Post by: AtmkRstr on March 14, 2003, 11:17:20 PM

thanks, I'll give hot glue a try