Aces High Bulletin Board
Help and Support Forums => Help and Training => Topic started by: AWLysol on April 22, 2003, 03:18:37 PM
-
Long time AW player, dropped out of AH for stick cal reasons, bored, gonna give 'er another go soon. Always had trouble with trim, I think that as much as calibration killed me as often as not. Looking for trim tips obviously. On or off etc etc. I remember always fighting against my own plane so much trying to keep guns on target that I could hardly ever get a stable platform. How do I avoid this problem? I was pretty durn decent in AW FR before I started playing in the kiddie pond out of boredom and I'd like to be able to enjoy AH as much as I did AW.
Call me names if ya wanna, just provide valuable tips, ok? >8^)
For all my friends an' enemas who might read this:
BAAAAAAAAAAAA!!!!
-
I usually stick with combat trim (automatic). If anything I'd have that and at least elevator trim mapped. Elevator trim can help get your plane out of compression. Many times I've lawn darted it (especially in the 109 here) and finally saw the light. If you start to compress and you're getting close to terra firma might be a good idea to dial in a little up trim--and quickly! hehe
Another thing trim is useful for is when you're damaged--some part of your plane is missing. That way you can sometimes compensate and get yourself flying somewhere closer to straight and level with your stick somewhere closer to center.
I like to manual trim when on landing approach too. Autotrim seems to want to keep me in a nose high state when I get slow. Too high for my liking anyway. So I dial in some nose low trim.
Welcome to AH former AW bro.
Drano
-
Hi Lysol! :) Well, I keep Combat Trim turned on, but if I do need any manual trim it will override Combat Trim, which will cut back in as soon as you make a manual change of direction or angle. When formation flying in bombers, for instance, a little left or right rudder trim is useful (J or L), and when landing, some down elevator trim (I) is useful.
There is an excellent section at Netaces.org on Auto Trim in Aces High (http://www.netaces.org/ahtraining/lephturn/trim.html#title) which is well worth reading.
Good Luck! :)
-
After flying RR AW for so long, I thought one of the hardest things to learn when moving to AH would be the trim system. It turned out to be one of the easiest things to learn and after awhile becomes almost second nature. There are things you have to know though, like which planes Combat Trim is effective in and what planes it isn't. Since I fly the P-38L, I use manual trim since Combat Trim is ineffective in the P-38L. The thing that helped me was Lephturn's article on AH trim, where he details the pros and cons of both manual and combat trim.
Lephturn's article on AH trim (http://users.andara.com/~sconrad/)
Ack-Ack
-
I fly with combat trim off. I toggle it to clean up my trims after a dogfight or serious B&Z session. I own the 568 Combatstick. If I had the FighterStick with the extra 4 way hat I'd map trims to it.
-
Originally posted by SunKing
I fly with combat trim off. I toggle it to clean up my trims after a dogfight or serious B&Z session. I own the 568 Combatstick. If I had the FighterStick with the extra 4 way hat I'd map trims to it.
I've got an older version of the Combat Stick, a Jane's F-16 Combat Stick and have the elevator and aileron trimmed to the upper right 4 way. Since I also have a Pro Throttle, I have the rudder trimmed on the index finger 4 way hat switch. But I rarely use either the aileron or rudder trim in the P-38 and only times I find myself using them is to compensate for battle damage to my flight controls.
Ack-Ack
-
Thanks for the tips y'all. Looks like I might be awhile yet, Saitek stick still not playing well with W2k and/or Dell's USB port. Might get tired enough to get another or format. Muuuahahahahah.
-
X45 & ch pro peds here - never have used combat trim - have trim set to rotors on throttle
always thought combat trim was for newbies but discovered many good sticks use it also (Exile's H2H ladder)
get another hard drive, dual boot to win98 for games and X45 works like a champ
-
Originally posted by Eagler
always thought combat trim was for newbies but discovered many good sticks use it also (Exile's H2H ladder)
I always thought that about auto-takeoff, but can't believe how many long-time players apparently do use it! It's something I've just never considered using. :)
-
I like auto takeoff if only because it gives me a chance to look around for vulchin' enemas. The only thing that sucks worse than being vulched is being shot down period.
Saitek has sent me some things to try, I got AH downloaded and installed last night so hopefully I'll be providing y'all lots of targets of opportunity pretty soon. I already made my "Fresh Meat" banner and hung it on all my planes of choice so I should be easy to spot.
lysol
Just Itchin' to Shoot Somebody Down Again
-
I only use manual for P-38s or 109G-10s. In other planes I just leave combat trim on, unless i get part of my wing shot off and need to trim it to try to keep it in the air.
Trim is useful in all fighters for getting out of a compressed dive but autopilot 'x' does the same thing.
-
I fly with Combat Trim off. I find it often puts you in the wrong trim for your next move, then slowly tries and catches up.
I mostly fly the Typhoon and if you're caught turn fighting in it with combat trim ON then it often puts you into a flat spin! Not good!
-
Originally posted by Flossy
I always thought that about auto-takeoff, but can't believe how many long-time players apparently do use it! It's something I've just never considered using. :)
I always use auto-takeoff! I got fed up of spinning F4U-Cs on the runway and occasionally crashing them so since then I auto-takeoff!
-
Originally posted by AWLysol
Saitek has sent me some things to try,...
what did they send you? you a marketing reseacher/field tester for um or something?
been a x36 - x45 loyalist for bout 6 years now
-
Originally posted by Replicant
I find it often puts you in the wrong trim for your next move, then slowly tries and catches up.
Prolly my biggest beef with combat trim. It just doesn't react fast enough when changing speeds. Seems like anyway.
Times like this I'll turn it off and do it myself. But I'm lucky to have a nice stick rig with buttons to spare.
Drano
-
>what did they send you? you a marketing reseacher/field tester for um or something?
been a x36 - x45 loyalist for bout 6 years now
A new version of the SST software. It's not available through the normal web page but go into their support forums and look in the Announcements area, the link to download it is posted there. They claim it fixes all the problems with Win2k/XP and finally allows 98 and ME users to actually program the thing. Dunno if it'll solve my disappearing/non calibrating stick problem but they claim it will sooooo...I'll giver 'er a shot. One more time.
Me too, I bought the first one about 5-6 years ago and broke it playin' AW. >8^) Several times in fact. Finally couldn't glue or solder it back together anymore. This is the third one I've had I think, I like having the rudder under my fingers, TM's rudders always turned me off, too light to stay still and the nice heavy one costs a fortune. I don't deal with those twisty rudders either like the Wingman and stuff. If I can get it working again without formatting I'll be one happy camper, I wanna get back into AH and maybe try out Jaleco's version of that other sim just for the eye candy. Pretty sure all my ol' squaddies are still in AH so it should be fun.
Besides, I'm jonesin' for some virtual air combat!
-
Im not a fan of combat trim.
Here is a little tip that doesn't get into advanced trimming(if there is such a topic) for tight angle fighting.
Before entering into a fight(merge) trim the nose up where the indicator is at the top part of the L
E
L (Indicator top part of the L)
V
If you let go of the stick in level flight with this trim setting, your nose should drift up. Now your ready to turn and burn.
See if it helps in that situation.
Drex
-
Hi!
To me Combat Trim is usefull only for cruising or during B&Z a fast manual trim reset.
During slow T&B fight combat trim try to cache current flight envelope and cause strange unwanted movments (imo).
-
Todate I have used combat trim with one part of my X45 throttle hat (little switch thingy)programmed to K (elevator nose up)
up >trim elev up
down > toggle combat trim.
This allows you to recover from compression or even raise the compression speed plus radically increase your instantanious turn rate (with corresponding e loss and g gain) when used.
I am wary of using it to assist turn but its use to trim for compression ( and dive pull out) is very handy.
I am not in the habit of toggling combat trim for combat....... I would probably forget to do it half the time.
-
Originally posted by Drex
Im not a fan of combat trim.
Here is a little tip that doesn't get into advanced trimming(if there is such a topic) for tight angle fighting.
Before entering into a fight(merge) trim the nose up where the indicator is at the top part of the L
E
L (Indicator top part of the L)
V
If you let go of the stick in level flight with this trim setting, your nose should drift up. Now your ready to turn and burn.
See if it helps in that situation.
Drex
does this vary plane to plane?
in the 109f while t&bing, I usually have it buried in the upper portion of the "E"
How bout aileron? do you trim in a turn advantage or just horizontal?