Aces High Bulletin Board
General Forums => Hardware and Software => Topic started by: Ripsnort on May 30, 2003, 09:31:15 AM
-
http://www.bandwidthplace.com
COuld this test be accurate?
Details
Your raw speed was 2342230.62 bits per second which is the same as:
Communications
2.3 megabits per second
How communication devices are rated. Kilo means 1,000 and mega means 1,000,000. Examples include 56k modem and 10Mbit Ethernet
Storage
285.9 kilobytes per second
The way data is measured on your hard drive and how file sharing and FTP programs measure transfer speeds. Kilo is 1,024 and mega is 1,048,576.
1MB file download
3.6 seconds
The time it would take you to download a 1 megabyte file at this speed.
Rating
Compared to all connection types worldwide, yours is fantastic
-
No that can't be right - unless you're using some superexpensive service. 2Mb connection is still very rare although the cablemodems can already handle that.
Your benchmark may be showing a wrong value if you're using a proxy.
OTOH if you're paying for a 2Mbit connection - that reading is naturally correct.
Commonly cablemodems run at 1-1.5 Mbits.
-
Try here Rip
http://www.dslreports.com/stest
-
or here:
http://www.numion.com/YourSpeed/Checkup.php?Duration=30&Repeat=600&L=us
-
I got 1730/224 off of http://www.dslreports.com/stest
thats on att/comcast cable
-
1981/252 off dslreports here.
I find downloading tiffs from http://www.loc.gov a better indicator of max download speed. They got some serious pipes at the Library of Congress--I've exceeded 3 mbps there.
-
Gee ..Ripsnort your system must be slow :-) ...
sprint
Your raw speed was 3304106.67 bits per second which is the same as:
Communications
3.3 megabits per second
Storage
403.3 kilobytes per second
1MB file download
2.5 seconds
Rating
Compared to all connection types worldwide, yours is fantastic
I only wish !
-
Yeah Rip, there's no reason you couldn't get that with a cable modem. Hell, just check your d/l speed from various places. A good test would be to download a big file from microsoft. Take whatever your download rate is, multiply it by 8, and that's what an ISP would rate your connection.
Here's a sample d/l from when AT&T cable was with @home:
(http://www.matthoffman.us/dl/fast.jpg)
424,000 X 8 = 3.4 Mbit
SOB
-edit- ...and yet another rate test -
http://computingcentral.msn.com/internet/speedtest.asp
-
SOB why do you multiply by 8? I am by no means a computer guru...serious question...not a troll.
-
to convert to bits....
-
IE will tell you your download speed in KiloBYTES, while your provider will always rate your connection speed in BITS...and there are 8 bits in a byte.
SOB
-
thanks