Aces High Bulletin Board
General Forums => Hardware and Software => Topic started by: JBA on August 22, 2003, 02:49:21 PM
-
Well I have succesfully built my first comp. Ya for me, but I do have one quetion.
I keep getting a device found when i boot up it's
Fireware Hub
dose anyone know what this is?
-
did you install any firewire cards into your machine?
i guess we would need to know what main board you are useing
-
Most of the new motherboards have a 1394 interface/hub on them. Sometimes it is referred to as firewire.
-
MSI Motherboard for Intel Processors, Model 875P Neo-LSR Retail Specifications: Supported CPU:Intel® Pentium 4 (Northwood ) processor up 3.6GHz or higher speed HT Ready Chipset:Canterwood 875P - ICH5R FSB:533/800MHz
RAM Dual Channel DDR 266/333/400 max 4GB (must use 800 FSB with DDR 400)
IDE Dual Ultra DMA 100/66 Controllers up to 4 Devices
Slots:1x AGP8X(0.8v)4X(1.5v) and 5 PCI 32-bit (3.3v) Slots Ports:2xPS2,2xCOM,1xLPT,2xUSB,1xRJ45 and Audio Ports Onboard Audio:ADI S/W 5.1 channel audio 1980 AC'97 Onboard SATA:Serial ATA/ 150 controller integrated in ICH5R Onboard LAN:Intel® 8262EZ 10/100
is this it?
-
There should be firewire (IEEE1394) drivers on the CD that came with the motherboard. They will either be seperate, or part of the chipset drivers.
-
Thanks I'll look again
-
If not on the motherboard there may be one on your audio card. The Audigy comes with firewire I believe.
-
yep, iron, the audigy comes with one port on the back of the box and one on control plate (the one that goes over an empty drive bay)