Author Topic: Pony skin bugs  (Read 347 times)

Offline Kev367th

  • Platinum Member
  • ******
  • Posts: 5290
Pony skin bugs
« on: August 31, 2005, 01:18:06 PM »
Few skin bugs in new Pony model.

1) Only two of the 4 props are skinned on the front, other two are skinned on the rear.

2) Outer leading edge of port wing seems to get its color from another place.

3) (Not shown in pic) Cannon shrouds on stbd wing get color from different place (can't find it as yet)



Offline old skins are still visible in the selection menu.
« Last Edit: August 31, 2005, 01:20:53 PM by Kev367th »
AMD Phenom II X6 1100T
Asus M3N-HT mobo
2 x 2Gb Corsair 1066 DDR2 memory

Offline Stegahorse

  • Copper Member
  • **
  • Posts: 306
Pony skin bugs
« Reply #1 on: August 31, 2005, 04:28:24 PM »
Well, there are holes on the skins everywhere before anyone shoots me!:rolleyes:
I thought I was important until I got Cancer and had to go to a cancer clinic.

Offline Kev367th

  • Platinum Member
  • ******
  • Posts: 5290
Pony skin bugs
« Reply #2 on: September 01, 2005, 09:01:31 PM »
Red = Where color comes from
Green = Where color should come from.

Found the area re-used for the leading edge on the port upper wing.




Area from which upper stbd cannon shrouds get their color is on the rear upper stbd wing.




Neither really affects bare metal skins, but will affect camo skins and any with the particalar area requiring color.
« Last Edit: September 01, 2005, 09:17:04 PM by Kev367th »
AMD Phenom II X6 1100T
Asus M3N-HT mobo
2 x 2Gb Corsair 1066 DDR2 memory

Offline OOZ662

  • Platinum Member
  • ******
  • Posts: 7019
Pony skin bugs
« Reply #3 on: September 01, 2005, 09:32:44 PM »
While we're on pony messups, while looking backwards with the head moved all the way up, back, and left, the sun is blocked out by the canopy.
A Rook who first flew 09/26/03 at the age of 13, has been a GL in 10+ Scenarios, and was two-time Points and First Annual 68KO Cup winner of the AH Extreme Air Racing League.

Offline TDeacon

  • Silver Member
  • ****
  • Posts: 1553
Pony skin bugs
« Reply #4 on: September 03, 2005, 12:08:05 AM »
The prop issue is found on p51b as well.  

In addition, the p51b gear covers seem to have a transparent section at the lower rear edge, as in the image below.  It's not just my skin, however, as I see the same thing in the default skin.  

« Last Edit: September 03, 2005, 12:15:16 AM by TDeacon »

Offline TDeacon

  • Silver Member
  • ****
  • Posts: 1553
Pony skin bugs
« Reply #5 on: September 04, 2005, 10:34:59 PM »
Another p51b issue is that part of the joint between the underside of the wing and the gear cover (or whatever its called) is visible through the top of the wing.  Note the curved line at the front of the wing near the fuselage in the image below:


Offline Kev367th

  • Platinum Member
  • ******
  • Posts: 5290
Pony skin bugs
« Reply #6 on: September 05, 2005, 09:03:57 AM »
Found another one -

On all the default skins (B and D) and probably some of the submitted ones -
The three lights on the underneath of the wing are on the port wing instead of the stbd.
AMD Phenom II X6 1100T
Asus M3N-HT mobo
2 x 2Gb Corsair 1066 DDR2 memory

Offline Kev367th

  • Platinum Member
  • ******
  • Posts: 5290
Pony skin bugs
« Reply #7 on: September 27, 2005, 10:22:53 PM »
WTG on fixing the three skin bugs (leading edge, prop, cannon shrouds) on the Pony D.
AMD Phenom II X6 1100T
Asus M3N-HT mobo
2 x 2Gb Corsair 1066 DDR2 memory

Offline TDeacon

  • Silver Member
  • ****
  • Posts: 1553
Pony skin bugs
« Reply #8 on: September 28, 2005, 07:43:20 PM »
Nice job HTC!!;  Now all we have is the light reflection bug, after which the plane will be perfect.  :-)

http://www.hitechcreations.com/forums/showthread.php?s=&threadid=160215