slight studder

[38ruk]

hello all just bought a new system 1333 t bird... 266fsb.. 64 meg radeon se.. 256 megs of ram ...400 w ps ..winme      i seem to have a slight studder every 5 mins or so was wonderin if maybe my cpu is gettin too hot runs a 53c under full load.....or maybe an irq prob it seems to have irq 11 stacked...any help would be aprecciated 8)
                                             
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural Keyboard   OK
IRQ 2   Programmable interrupt controller   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard Floppy Disk Controller   OK
IRQ 7   Printer Port (LPT1)   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   SCI IRQ used by ACPI bus   OK
IRQ 10   VIA AC'97 Audio Controller (WDM)   OK
IRQ 10   ACPI IRQ Holder for PCI IRQ Steering   OK
IRQ 11   RADEON           OK
IRQ 11   VIA Tech 3038 PCI to USB Universal Host Controller   OK
IRQ 11   VIA Tech 3038 PCI to USB Universal Host Controller   OK
IRQ 11   SUP2750 PCI Modem Enumerator   OK
IRQ 11   SupraMax 56i Voice PCI   OK
IRQ 11   ACPI IRQ Holder for PCI IRQ Steering   OK
IRQ 11   ACPI IRQ Holder for PCI IRQ Steering   OK
IRQ 11   ACPI IRQ Holder for PCI IRQ Steering   OK
IRQ 12   PS/2 Compatible Mouse Port   OK
IRQ 13   Numeric data processor   OK
IRQ 14   VIA Bus Master PCI IDE Controller   OK
IRQ 14   Primary IDE controller (dual fifo)   OK
IRQ 15   VIA Bus Master PCI IDE Controller   OK
IRQ 15   Secondary IDE controller (dual fifo)   OK
)

[Lephturn]

Having your modem, and your video card, AND your USB controller all on the same IRQ is a bad idea, and could be the cause of your problems.

You need to get them sorted on their own, especially modem and video.

What mainboard do you have?  What cards are in which slots?

[bloom25]

Unless you have ACPI turned on your modem and video card should not be on the same IRQ.  My guess is the modem has been put in the PCI slot nearest to the AGP slot (video card).  If the agp slot is in use the first pci slot should not be used.  I would remove the modem in device manager, shut the computer down, and then move the modem to another free slot.  When you restart it should be redetected automatically.

Another thing you should try is removing the little flashing modem icon from the taskbar.  That's usually found by opening network neighborhood, connections menu, settings, uncheck 'show icon on taskbar when connected.'

[38ruk]

thx for the replies ... i have a fic ad11 mainboard...modem is in the 2nd pci slot.. agp slot  is in use..  no other cards installed ...ive tried to change irq's to no avail.. ive already taken the dial up icon off screen....   thx for the help  8))

[38ruk]

IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural Keyboard   OK
IRQ 2   Programmable interrupt controller   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard Floppy Disk Controller   OK
IRQ 7   Printer Port (LPT1)   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   IRQ Holder for PCI Steering   OK
IRQ 9   SUP2750 PCI Modem Enumerator   OK
IRQ 9   SupraMax 56i Voice PCI   OK
IRQ 10   IRQ Holder for PCI Steering   OK
IRQ 10   VIA AC'97 Audio Controller (WDM)   OK
IRQ 11   IRQ Holder for PCI Steering   OK
IRQ 11   IRQ Holder for PCI Steering   OK
IRQ 11   RADEON           OK
IRQ 11   VIA Tech 3038 PCI to USB Universal Host Controller   OK
IRQ 11   VIA Tech 3038 PCI to USB Universal Host Controller   OK
IRQ 12   PS/2 Compatible Mouse Port   OK
IRQ 13   Numeric data processor   OK
IRQ 14   VIA Bus Master PCI IDE Controller   OK
IRQ 14   Primary IDE controller (dual fifo)   OK
IRQ 15   VIA Bus Master PCI IDE Controller   OK
IRQ 15   Secondary IDE controller (dual fifo)   OK
ok ive finally figured out how to get my modem moved.  i still cant move the agp slot or the usb port..  any suggestions?? thx guys