Author Topic: Fastest you've ever been?  (Read 1776 times)

Offline WWhiskey

  • Gold Member
  • *****
  • Posts: 3122
Re: Fastest you've ever been?
« Reply #45 on: April 27, 2009, 02:54:01 PM »
a little slow

but how high?   alt wise that is


 :aok
Flying since tour 71.

Offline captain1ma

  • Aces High CM Staff
  • Plutonium Member
  • *******
  • Posts: 14384
      • JG54 website
Re: Fastest you've ever been?
« Reply #46 on: April 27, 2009, 03:18:37 PM »
What'd you do, push it off a cliff?  :-)

noooooo mine actually ran good. wide open on a 5 mile sort of straight away.....with 3 witnesses

Offline Mace2004

  • Silver Member
  • ****
  • Posts: 1528
      • TrackIR 4.0
Re: Fastest you've ever been?
« Reply #47 on: April 27, 2009, 05:16:10 PM »
noooooo mine actually ran good. wide open on a 5 mile sort of straight away.....with 3 witnesses
Any sober?  ;-)
Mace
Golden Gryphon Guild Mercenary Force G3-MF

                                                                                          

Offline captain1ma

  • Aces High CM Staff
  • Plutonium Member
  • *******
  • Posts: 14384
      • JG54 website
Re: Fastest you've ever been?
« Reply #48 on: April 28, 2009, 08:39:35 AM »
one of the few times i was sober back then!

Offline trigger2

  • Silver Member
  • ****
  • Posts: 1342
Re: Fastest you've ever been?
« Reply #49 on: April 28, 2009, 09:55:19 AM »
Y'all do realize you aren't actually moving?

Then what's with these blackouts I keep getting?


Eh, I've gotten up to ~mach 1.5, nosedive in a 163... Tried it in a 262 but it's wings didn't like it much.  :devil
Sometimes, we just need to remember what the rules of life really are: You only
need two tools: WD-40 and Duct Tape. If it doesn't move and should, use the
WD-40. If it shouldn't move and does, use the duct tape.
*TAs Aerofighters Inc.*

Offline RedDg

  • Silver Member
  • ****
  • Posts: 998
Re: Fastest you've ever been?
« Reply #50 on: April 28, 2009, 09:56:01 AM »
Mach 1.03 in the back seat of an F-16D

Offline druski85

  • Silver Member
  • ****
  • Posts: 1212
Re: Fastest you've ever been?
« Reply #51 on: April 28, 2009, 12:32:52 PM »
~70 mph with nothing but two composite planks on my feet between me and my maker.  Nothing like a good downhill race to get your blood pumping.  You guys can keep your fancy planes and cars.    ;)

http://www.npr.org/templates/story/story.php?storyId=5202057

Offline 100hooch

  • Copper Member
  • **
  • Posts: 145
Re: Fastest you've ever been?
« Reply #52 on: April 28, 2009, 04:18:00 PM »
Didn't do it myself, but I saw Pannono going Mach 3.98 to report me to Skuzzy.
"It's not our job to die for our country.  It's our job to make the other poor dumb sonofasqueak die for his!" -- Gen. George S. Patton

Offline ink

  • Persona Non Grata
  • Plutonium Member
  • *******
  • Posts: 11274
Re: Fastest you've ever been?
« Reply #53 on: April 28, 2009, 04:30:18 PM »
145(stopped paying attention at that) in a 73 Challenger,with a 340, went from Casa Grande Arizona to Tuscon AZ in about 19 min, normally takes an hour.

Offline Scherf

  • Gold Member
  • *****
  • Posts: 3409
Re: Fastest you've ever been?
« Reply #54 on: April 28, 2009, 04:47:47 PM »
.
... missions were to be met by the commitment of alerted swarms of fighters, composed of Me 109's and Fw 190's, that were strategically based to protect industrial installations. The inferior capabilities of these fighters against the Mosquitoes made this a hopeless and uneconomical effort. 1.JD KTB

Offline Strip

  • Gold Member
  • *****
  • Posts: 3319
Re: Fastest you've ever been?
« Reply #55 on: April 28, 2009, 11:10:22 PM »
8.56 E.T. at 155.83 mph

216" Hardtail W/ SBC

 

Offline Dano

  • Zinc Member
  • *
  • Posts: 77
      • Danosacm.com
Re: Fastest you've ever been?
« Reply #56 on: April 29, 2009, 12:05:35 AM »
11.62 @ 125ish
'55 Chevy SB 400 w/ 115 hp squeeze
No roll cage, got kicked off the track after that full pass on the squeeze....LOL.

Sorry, I already posted my F16 ride, but Strip started the 1/4 mile stuff.  :D
<S> Dano
Few problems in life cannot be fixed without the precise placement of high explosives. --Ukn
ACM Tip: Keep the bad guy out front and squeeze the trigger when the little black dot is on them.
http://www.danosacm.com/