Author Topic: Amd k6-2 450with Voodoo 3, but i heard TNT2 is better?  (Read 398 times)

Offline Daniko

  • Zinc Member
  • *
  • Posts: 76
Amd k6-2 450with Voodoo 3, but i heard TNT2 is better?
« on: January 19, 2000, 07:22:00 PM »
I have an AMD k6-2 450 on an epox ata66 MB.  I am using a PCI version of the Voodoo 3, 2000 vid card and am getting frame rates of about 18 sitting on the runway, and 20 to 30 in flight.  In a discussion online a while ago folks were mentioning that the TNT2 cards are better looking, and faster.  I'm wondering if this is the case for Amd-processors as well as Pentiums and celerons.  I have an AGP slot, but allready had my vid card before i purchased the computer.  Is AGP gonna make any real difference in frame rate??  I'm wondering what would be my best bet in improving performance.

Offline Tern

  • Zinc Member
  • *
  • Posts: 1
Amd k6-2 450with Voodoo 3, but i heard TNT2 is better?
« Reply #1 on: January 19, 2000, 07:40:00 PM »
Amazing, (or disgusting, depending on ones PoV).  I'm using the VooDoo1 Black Magic and get the same frame rates on the ground or in the air of: 13-23  (Lately it's averaging 18-20 in flight.   And I have the same CPU  AMD-K6-2-450    Dingy and Jolly have some good input for this thread.  They get 20-40, or so I hear.

Offline Daniko

  • Zinc Member
  • *
  • Posts: 76
Amd k6-2 450with Voodoo 3, but i heard TNT2 is better?
« Reply #2 on: January 19, 2000, 08:27:00 PM »
thanks tern, ill try to find them to get some info.  I am in 1025 res, . . .and i just gave myself a boost by updating my SB live drivers.  I'm now pushing 25-35 in the air, occasionally hitting 40-45, and not dropping below 20 unless i get a few bombers close together.  damn those bombers.

Offline Daniko

  • Zinc Member
  • *
  • Posts: 76
Amd k6-2 450with Voodoo 3, but i heard TNT2 is better?
« Reply #3 on: January 19, 2000, 09:31:00 PM »
well i'm posting all my own replies, but i just went to 1600 res on my 19 in monitor, and i'm staying around 22 to 26 in the air, and it looks crystal clear real. . .I love it, . .tho i'd still like to push the frames up a bit, as they can drop off significantly especiall dogfighting in mountains.

Offline Rude

  • Platinum Member
  • ******
  • Posts: 4609
Amd k6-2 450with Voodoo 3, but i heard TNT2 is better?
« Reply #4 on: January 21, 2000, 09:19:00 AM »
Daniko,

I had used a K6-2 450 with a Monster 16meg card...got the same fps as you....bought a Viper 770 thinking I would get improved fps....not gonna happen

The reason is HT does not support the AMD 3D Now tech....only intel.

If you want more fps, which you do , believe me it makes a diff, then you must change MB and Processor.

I jus switched to a Celeron 500 and went from 26fps average to a 42fps average and I have'nt even overclocked the processor yet.

Jus my 2 cents worth

Rude..............Out