gunsite 51D

[ten367th]

gunsite on 51D not centered

[JimmyD3]

Push your Home button then F10 to save.

[FLS]

For TrackIR try Ctrl-F4 to center.

[Randy1]

Just to add to the other posts.  You can use "page up" and "page down" to adjust the position up and down.  Use the "arrow" keys for left and right and forward back movements.  Use F10 to save as posted before.

[lunatic1]

See Rule #2

[ten367th]

I know all those things all gunsites work but not 51D

[FLS]

What happens with the 51D?  My P-51D gunsight is centered and recenters properly if I move it.

[Skuzzy]

Need to see a screenshot showing what you are seeing.  We cannot duplicate what you are describing.

Now there is something different with VR which occurs if you get your head position too close to the gun sight.  It should up on the B25 gun sights.  When you get close to the gun sight it cannot be drawn for both eyes without splitting the reticle.

In the B25, you had to move your head left or right and close the other eye to get the crosshair in view.

We have instituted a work around for this, but it will require each plane to be changed and we need to know which ones are effected.  The P51D does not seem to fit this issue, so we are at a loss as to what you are describing.

[bustr]

Is the OP referring to the K14 and that the fixed reticle should be centered over the left projection lens? If that is the case, use the left arrow key and center your cockpit and reticle over the left lens. You will have to play with how close to the reflector plate your POV is so that you don't push the reticle pattern off the mask window that shows the bitmap called the reticle. If this is the problem. From looking at assemblies for the fixed reticle mirror, it can be adjusted to reflect the image to the center of the reflector plate.