Author Topic: Need help configurinh AH.  (Read 308 times)

Offline miko2d

  • Parolee
  • Gold Member
  • *****
  • Posts: 3177
Need help configurinh AH.
« on: August 15, 2000, 08:36:00 AM »
 Hi guys,
 I've just got a new computer: Dell Dimention 4100 - 815 based P3/800, 128MB 133 SDRAM, with GeForce 2 GTS 32 MB and 21" Monitor.
 Could you please suggest what video settings  I should use for the best experience, like resolution, 32 or 16 bit, triple buffering, Z-buffer, etc.
 What frame rates should I expect.

 I also have MS SideWinder PPro and pedals coming. Any suggestions on the stick key mappings?

Thanks,
miko--

Offline Ripsnort

  • Radioactive Member
  • *******
  • Posts: 27251
Need help configurinh AH.
« Reply #1 on: August 15, 2000, 08:44:00 AM »
Heres what little I know of squeezing the most out of puters...make sure you choose in VIRTUAL MEMORY to manage your own memory, then double the MIN/MAX to whatever  amount of ram you have, if you have 128, then check 'MIN/MAX' to 300.  I use 1024X res with 32 bit color (best for sunsets is 32, 16 makes it segmented on my system)

Offline Ash

  • Zinc Member
  • *
  • Posts: 3
Need help configurinh AH.
« Reply #2 on: August 15, 2000, 08:48:00 AM »
Miko2d,
  Considering a Dell system myself < real soon :-0>. Are you happy with your system so far? Would you recommend buying a system from them? Also, what type of pedals are you planning on using with your PPro?

Thanks in Advance,
Ash
I./JG2

Offline LLv34_Snefens

  • Nickel Member
  • ***
  • Posts: 728
      • Lentolaivue 34
Need help configurinh AH.
« Reply #3 on: August 15, 2000, 09:16:00 AM »
I just bought a Intel 815 P3-800 Mhz with 256 MB 133SD-RAM and Asus Geforce 2 V7700 Pro.

I use 1280x1024 at 32bit and this gives me around 40 FPS when sitting at runway. When cruising it is about 65 and it tops at 85 (my refresh rate) when I can't see ground.
Lowest I have seen was when looking at 7 smokepillars at a field i was sitting at in my pzr. It was around 10.

------------------
"Head-ons are for pilots that don't know what their next move should be"

Ltn. Snefens
RO, Lentolaivue 34
Snefens, Lentolaivue 34.
Location: Aarhus, Denmark

"Luck beats skill anytime"

Offline Ripsnort

  • Radioactive Member
  • *******
  • Posts: 27251
Need help configurinh AH.
« Reply #4 on: August 15, 2000, 09:18:00 AM »
Snefens, your sig should read "Head ons are for pilots that have ran out of options!"
hehehe.

Offline miko2d

  • Parolee
  • Gold Member
  • *****
  • Posts: 3177
Need help configurinh AH.
« Reply #5 on: August 15, 2000, 09:54:00 AM »
 Ash,
 I cannot tell you anything specific about my system yet because I've only had it for one day. I know a lot about PCs and I spent a long time selecting the system. I intended to build one myself, but that Dell happened to have all the components I wanted and pretty cheap. They use standard stuff, so there should be no problems with upgrades later.

 It gives me nice framerates at 1600x1200 in 32 with triple buffering offline but I am sure that on-line I would have to go lower - 1280 or 1024, do not know which yet. I would prefer 32 - the sunset does look better. But 16 should be much faster.
 At 1280x1024 I can set 100Hz refresh rate which is helpfull in case I do not use tripple buffering (should I disable it?). Triple buffering costs lot extra memory on the card but makes the frame rate independent from the refresh rate, much like with V-sync off, but without tearing effects.
 At the same time with triple buffering disabled a frame rate is a fraction of the refresh rate. So at 1280x1024 it is 50fps or 33fps. Most likely it will be 50fps when alone but probably never lower then 33fps no matter what. Is it reasonable to fly at a stable 33fps or should I try to squeeze more? Should I sacrifice 32 bit for extra framerate?

 It would seem to me that there may be advantages to a card producing a stable 33fps if that is an acceptable rate:
 1. Constant frame rate makes aiming a little bit more consistant. What you see is delayed by 1/33th of a second but always by that amount, so your aiming habits comensate for that.
 2. Absence of the third frame buffer at 1280x1024x32 frees 5,2 MB of the card memory which improves efficiency and eases the load on the memory. It increases speed but that is pointless because you are limited to 30fps anyway, unless that is enough of the increase to push me into 50fps.
 3. If a card can only draw 33 or 50 screens per second instead of, say 75, it redices the load on the rest of the system because it uses some of teh CPU and bus throughput anyway, and that can only make the rest of the game more stable.

 I will have to do some extensive testing unless someone gives me an advice. on those settings for a similar system.

 I've ordered the only pedals worths considering - CH Pro-Pedals USB. Anyone who keeps alive the obsolete CPU-hogging, spikng and trouble-prone 20-year old analog gameport standard by buying not-USB peripherals deserves all the traouble he will get.
 AH is probably the only flight sim now supporting the multiple controllers, but that is what we fly anyway.

miko--

dudedog

  • Guest
Need help configurinh AH.
« Reply #6 on: August 15, 2000, 01:05:00 PM »
I would personally leave the "disable triple buffering" and "use z buffer" boxes unchecked. They don't do anything positive for you and I think they are there mostly for compatibility. Run the resolution as high as possible. With you 21" monitor 1600x1200 should be awesome   If you get acceptable frame rates at 1600x1200 you might "try" 32 bit color but be aware the it essentially doubles the load on your hardware. It's my own personal preferance to have higher resolution with lower colors as this affords better definition of objects in AH and gives you the upper hand in identifying a planes aspect or ground targets,etc... But who knows, with your uber-system, maybe you can have your cake and eat it too  

Offline Camel

  • Zinc Member
  • *
  • Posts: 95
Need help configurinh AH.
« Reply #7 on: August 15, 2000, 05:35:00 PM »
Ive seen posts stating better fps @ 32bit.
If there is a difference its small.