« previous next »
Pages: [1]   Go Down

Author Topic: Stick losing calibration  (Read 438 times)

Offline Getback

  • Platinum Member
  • ******
  • Posts: 6364
Stick losing calibration
« on: May 27, 2012, 07:10:13 AM »
I have to constantly recalibrate. At times it feels like I'm on a tightrope, with it tipping left and then right. Awfully inconvenient when in a tough fight. I'm thinking of taking apart the components and cleaning them for one. The other I'm thinking maybe power management has something to do with this.

It's a full CH set up. Any advice?
Logged

  Created by MyFitnessPal.com - Free Calorie Counter

Offline zack1234

  • Plutonium Member
  • *******
  • Posts: 13214
Re: Stick losing calibration
« Reply #1 on: May 27, 2012, 07:49:47 AM »
powered hub might sort out your problem :)
Logged
There are no pies stored in this plane overnight

                          
The GFC
Pipz lived in the Wilderness near Ontario

Offline Getback

  • Platinum Member
  • ******
  • Posts: 6364
Re: Stick losing calibration
« Reply #2 on: May 27, 2012, 11:03:00 AM »
I flew for quite a bit this morning and no problems after I changed the power settings to never. I heard Skuzzy say something about that once.
Logged

  Created by MyFitnessPal.com - Free Calorie Counter

Offline zack1234

  • Plutonium Member
  • *******
  • Posts: 13214
Re: Stick losing calibration
« Reply #3 on: May 27, 2012, 11:11:55 AM »
Hurrah! 

Pc's are poo:)
Logged
There are no pies stored in this plane overnight

                          
The GFC
Pipz lived in the Wilderness near Ontario

Offline The Fugitive

  • Plutonium Member
  • *******
  • Posts: 17932
      • Fugi's Aces Help
Re: Stick losing calibration
« Reply #4 on: May 27, 2012, 03:01:25 PM »
Quote from: Getback on May 27, 2012, 11:03:00 AM
I flew for quite a bit this morning and no problems after I changed the power settings to never. I heard Skuzzy say something about that once.

Do you have a powered USB hub? If you don't you WILL have trouble. While CH isn't as power hungry as some Saitek stuff they still pull alot of juice. If you don't have a powered hub your computer power supply must supply power for ALL your USB units as well as the MB, video card, and sound card, and fans.

I have a full CH setup as well. Mine is on a powered USB hub and has been for years and I never have had any trouble.
Logged

Offline Getback

  • Platinum Member
  • ******
  • Posts: 6364
Re: Stick losing calibration
« Reply #5 on: May 27, 2012, 07:07:41 PM »
Quote from: The Fugitive on May 27, 2012, 03:01:25 PM
Do you have a powered USB hub? If you don't you WILL have trouble. While CH isn't as power hungry as some Saitek stuff they still pull alot of juice. If you don't have a powered hub your computer power supply must supply power for ALL your USB units as well as the MB, video card, and sound card, and fans.

I have a full CH setup as well. Mine is on a powered USB hub and has been for years and I never have had any trouble.

Yes, have a powered hub. After some thought I realized it was okay on the old computer but not this one. That's when I remembered what Skuzzy said.
Logged

  Created by MyFitnessPal.com - Free Calorie Counter

Offline Bizman

  • Plutonium Member
  • *******
  • Posts: 9606
Re: Stick losing calibration
« Reply #6 on: May 28, 2012, 04:18:06 AM »
Quote from: Getback on May 27, 2012, 11:03:00 AM
I flew for quite a bit this morning and no problems after I changed the power settings to never. I heard Skuzzy say something about that once.
Power saving options are no option for gaming. "Allow Windows shut this component off to save energy" can be a PITA when trying to find out why something isn't working like it should.
Logged
Quote from: BaldEagl, applies to myself, too
I've got an older system by today's standards that still runs the game well by my standards.

Kotisivuni
Pages: [1]   Go Up
« previous next »