« previous next »
Pages: [1]   Go Down

Author Topic: In Flight Problem  (Read 705 times)

Offline Cheyenn

  • Zinc Member
  • *
  • Posts: 87
      • virtual 97th Bomb Group (H)
In Flight Problem
« on: January 27, 2015, 10:02:02 PM »
Ok here is the problem, I fly mostly the B-17's, after take off I go into the autopilot speed (auto-climb ALT X). After 10-20 minutes it will turn off and at times I get don't move your controls to rapidly, even when I am not touching my controls. However now it is only a few seconds after I hit Alt X it goes off right away.
I have an Saitek X 52 which is going on nine years. Plus I have a very slow internet connection, I have a wifi with 1 mbps. What is happening with my stick, is it too old now or is it the internet connection causing the problem. I do calibrate my stick before going in to the hanger and to the runway.
Even if I hit Autopilot Angle (Shift X) and Autopilot Level (X) it will turn off in a few seconds.
If any one has an ideal how I can fix this problem.
Logged
v97th Bomb Group (Heavy)


"VENIT HORA"
"THE HOUR HAS COME"

Offline FLS

  • AH Training Corps
  • Plutonium Member
  • *******
  • Posts: 11617
      • Trainer's Website
Re: In Flight Problem
« Reply #1 on: January 27, 2015, 10:40:39 PM »
Wifi is not a good connection for Aces High. You should use a cable to connect to your router or modem.

Check your controller setup advanced tab for your stick. See if there is jitter or spiking when the stick is still and when you move it.
You can adjust deadband if the stick doesn't return to center and damping to help with spiking.
Logged

Offline Cheyenn

  • Zinc Member
  • *
  • Posts: 87
      • virtual 97th Bomb Group (H)
Re: In Flight Problem
« Reply #2 on: January 28, 2015, 12:46:23 AM »
FLS I live in the Philippines and right now I do not have much choice of ISP. I moved to a bigger house and where I am living now I can not get DSL landline because the ISP do not have a place to install it, I really belive they are to lazy to try. Any way I will check my controller setup.
Logged
v97th Bomb Group (Heavy)


"VENIT HORA"
"THE HOUR HAS COME"

Offline mbailey

  • Platinum Member
  • ******
  • Posts: 5677
Re: In Flight Problem
« Reply #3 on: January 28, 2015, 05:17:39 AM »
One other thing that may help is a powered USB hub to plug your x52 into  

I was having loss of calibration issues and spiking, the powered hub cleared it right up  

They are not expensive at all   
Logged
Mbailey
80th FS "Headhunters"
Ichi Go Ichi E
Character is like a tree and reputation like its shadow. The shadow is what we think of it; the tree is the real thing.

When the game is over, the Kings and Pawns all go into the same box.

Offline cattb

  • Silver Member
  • ****
  • Posts: 1163
Re: In Flight Problem
« Reply #4 on: February 02, 2015, 10:14:44 AM »
Make sure the connection cord between the sticks is staying connected. Do what FLS says. If it is spiking the problem may be able to be fixed by cleaning the pods. 9 years old I am sure the pods are getting dirty.
Logged
:Salute Easy8 EEK GUS Betty

Offline Cheyenn

  • Zinc Member
  • *
  • Posts: 87
      • virtual 97th Bomb Group (H)
Re: In Flight Problem
« Reply #5 on: February 04, 2015, 07:39:35 AM »
Gents Thank You for your advice. I have a new joy stick on the way, due to having problems with most companies not shipping to the Philippines, I found one that did. Due to money problems, I order a Saitek X 52 Pro. As for the usb hub, I got one and it seems to be working well. I still have one problem, when I am in auto-speed (auto-climb) the controls go off and I get the message of Do Not Move your controls so rapidly. The thing is I am not even touching the controls. Any way Thank You all for your help and advice.
Logged
v97th Bomb Group (Heavy)


"VENIT HORA"
"THE HOUR HAS COME"

Offline FLS

  • AH Training Corps
  • Plutonium Member
  • *******
  • Posts: 11617
      • Trainer's Website
Re: In Flight Problem
« Reply #6 on: February 04, 2015, 09:46:22 AM »
Sounds like your stick is spiking and that's kicking the auto pilot off. The X52 Pro has a Hall sensor and they don't spike so that should fix that problem.

For a temporary fix while waiting for your new stick you can copy mode 1 to mode 3 in controller setup. In mode 3 unassign the roll, pitch, and rudder axis on your current stick. Set a button in mode 1 to switch to mode 3. Set the same button in mode 3 to switch back to mode 1. When you use auto speed switch to mode 3 and it should stay on.
Logged

Offline NikonGuy

  • Copper Member
  • **
  • Posts: 288
Re: In Flight Problem
« Reply #7 on: February 12, 2015, 07:36:51 AM »
Sticks throttle, rudders direct into the pc case usb's at the back of the machine which usually leaves one for the powered hub to go into for mouse, kb, headset, trackIR etc .. must be powered though.  I had awful problems until I did this .. never had any stick issues since .. :)
Logged
You break 'em, I fix 'em.
RAAF Retired Aircraft Maintenance Technician, General Dynamics F111, Lockheed P3C, Douglas A20G & DB7

Offline FLS

  • AH Training Corps
  • Plutonium Member
  • *******
  • Posts: 11617
      • Trainer's Website
Re: In Flight Problem
« Reply #8 on: February 12, 2015, 09:07:33 AM »
Generally it's the flight controllers that need a powered Hub. If the motherboard has insufficient power and you have a lot of peripherals it may be best to add 2 powered USB hubs.
Logged
Pages: [1]   Go Up
« previous next »