Author Topic: Setting Up VR  (Read 4116 times)

Offline mittsy

  • Zinc Member
  • *
  • Posts: 19
Re: Setting Up VR
« Reply #45 on: April 06, 2020, 10:36:51 PM »
The lighting is pretty good, but Ill try to add another. Hasn't done it in a while. Did it again tonite. Everything works fine except side to side head motion. It stays locked on the gunsight, but only side to side. I can turn my head and look up and down no problem, just leaning side to side keeps gunsight dead center locked in my fwd view. When I go back to the main AH menu, and can see the occulus menu behind it, there is a white line from my chest to the center of the screen. Only noticed it when this happens and goes away when I close AH.

Offline Drano

  • Platinum Member
  • ******
  • Posts: 4125
Re: Setting Up VR
« Reply #46 on: April 07, 2020, 07:19:38 AM »
Try running AH by the dx11 exe and see if that makes a difference. I never had any luck running it by the ocr exe. You'll have to verify you want to use your headset on your monitor tho. It'll just show "loading" in your headset until you do.

Sent from my Moto Z (2) using Tapatalk

"Drano"
80th FS "Headhunters"

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)

FSO flying with the 412th Friday Night Volunteer Group

Offline BTPommyB

  • Zinc Member
  • *
  • Posts: 60
Re: Setting Up VR
« Reply #47 on: April 12, 2020, 07:26:57 AM »
I had lots of problems with my Vive Pro until I started logging on via Virtual Desk Top.
Virtual Desk Top ----> Voice Attack-----> AH ...in that order. Also have to set my speaker settings so I get headphones and not PC speakers.  Life is not easy for early adapters, but more interesting.

Offline diaster

  • Copper Member
  • **
  • Posts: 347
Re: Setting Up VR
« Reply #48 on: November 07, 2024, 11:29:32 AM »
BTW Sax, if you haven't heard of it this app is a must for VR. The full version is the best 10 bucks I ever spent of a program! Check it out here:

 https://voiceattack.com/

With Voice Attack you can set various commands with your voice rather than by typing, which is quite the challenge in VR to say the least. It works great for general commands but I've found if trying to reply to someone in the buffer it comes out word salad and takes too long to correct. Probably my Mid-Atlantic accent throwing it off! I have the mouse forward and back keys set to enable and disable listening. I have all kinds of stuff set like for running the bomb sight which would be almost impossible otherwise with a VR headset on. Things like the tail hook. Don't fly the blue planes a lot so I just have it set up in VA. I want to drop or raise the hook I just say "Tail Hook" and it's done. I just set up a series of commands for adjusting head position as I described earlier. Thanks for giving me the idea! Super easy! I have buttons mapped to stop and center tracking on my stick and have since I used to use TIR. Simply stop tracking, hit the mouse key so VA is listening. I say "Head Left"--it bumps it left. I say "Head Right"--it bumps it right, etc. When I'm done I say "Save Head Position"--it hits F10 and it's done. No getting out of the headset!
What key bumps the head position in vr? My old track ir center button doesn’t center the view in vr, what is wrong?
"Harden The F_ck Up”

Offline SNO

  • Aces High CM Staff
  • Gold Member
  • *****
  • Posts: 2172
Re: Setting Up VR
« Reply #49 on: November 07, 2024, 03:27:32 PM »
My center button I used in trackir centers mine. Check to make sure your center command isn’t  mapped to more than 1 button maybe??
☩Schnee☩
Jagdgeschwader 11

Das-Beste-kommt-erst-noch

Offline diaster

  • Copper Member
  • **
  • Posts: 347
Re: Setting Up VR
« Reply #50 on: Today at 12:02:36 PM »
My center button I used in trackir centers mine. Check to make sure your center command isn’t  mapped to more than 1 button maybe??
roger got it figured out, thanks
"Harden The F_ck Up”