Author Topic: Need Puter Help...  (Read 204 times)

Offline AWMac

  • Plutonium Member
  • *******
  • Posts: 9251
Need Puter Help...
« on: August 21, 2003, 09:42:55 AM »
With all the viruses and worms around I thought I had a good protection system on the puter *musta broke the condom* soo to make things short I have no "Red" to my colors on the puter.
  It's killin me.  Hard to fly when there is no RED icons.

  If any of you good puter types out there please help me get the red back.

  Beggin.

:(

Offline Trell

  • Nickel Member
  • ***
  • Posts: 693
Need Puter Help...
« Reply #1 on: August 21, 2003, 10:07:40 AM »
Do you mean that your moniter is not showing red anymore?.

if that is the case.
it is more than likly your moniter.
you will probably have to replace it.

Offline AWMac

  • Plutonium Member
  • *******
  • Posts: 9251
Need Puter Help...
« Reply #2 on: August 21, 2003, 10:11:02 AM »
Yeah, now red what so ever.... Monitor is like really old... bought it in the '90's... about '96...sooo monitor?... easy to fix.  Thanks.


Just glad it was something like a vid card.  :(


:D

Offline Boroda

  • Persona Non Grata
  • Platinum Member
  • ******
  • Posts: 5755
Need Puter Help...
« Reply #3 on: August 21, 2003, 10:20:10 AM »
Did you try to twist the signal cord near the plugs? both on video card and on monitor?

90% of such malfunctions are caused by a break in a VGA cord or bad contacts in the plugs. VGA uses an analog signal, with separate lines for every of three colours.  You can also try to reverse the signal cable. Also look at the pins in 15-pin VGA plugs, some of them may be bended.

If your OSD shows normal colours - it is probably something outside the monitor.

Offline AWMac

  • Plutonium Member
  • *******
  • Posts: 9251
Need Puter Help...
« Reply #4 on: August 21, 2003, 10:24:06 AM »
Broda the problem with the OSD is that it show's the RED as Black..hardly distinguishable as any color than just black.  I'll try the cable bit you recommended. Thanks Comrade, Bud.

:)

Offline Boroda

  • Persona Non Grata
  • Platinum Member
  • ******
  • Posts: 5755
Need Puter Help...
« Reply #5 on: August 21, 2003, 10:35:59 AM »
Quote
Originally posted by AWMac
Broda the problem with the OSD is that it show's the RED as Black..hardly distinguishable as any color than just black.  I'll try the cable bit you recommended. Thanks Comrade, Bud.

:)


If OSD shows red as black - then I think that unfortunately you need a new monitor :( Or just find a repair shop to fix it, but I don't know if it's cheaper then to buy a new monitor...

:(

Offline AWMac

  • Plutonium Member
  • *******
  • Posts: 9251
Need Puter Help...
« Reply #6 on: August 21, 2003, 10:51:01 AM »
Broada Thanks bud.  


Send some Vodka from Russia Please...;)



With Respect,

AWMac


:D