« previous next »
Pages: [1]   Go Down

Author Topic: X52 questions  (Read 566 times)

Offline Tilt

  • Platinum Member
  • ******
  • Posts: 7358
      • FullTilt
X52 questions
« on: February 28, 2005, 05:24:42 PM »
For anyone else with and X52...........

1)Can AH "see" your Rotary 2 (thats the big rotary on the throttle)

With respect to this can you confirm if you have pedals (with/without toe brakes) as well as the x52.

2)In the control panel for the x52 do you get full scale deflection for the js in both x and y axis?

Thanks
Logged
Ludere Vincere

Offline Eagler

  • Plutonium Member
  • *******
  • Posts: 18232
Re: X52 questions
« Reply #1 on: February 28, 2005, 05:28:16 PM »
Quote
Originally posted by Tilt
For anyone else with and X52...........

1)Can AH "see" your Rotary 2 (thats the big rotary on the throttle)

With respect to this can you confirm if you have pedals (with/without toe brakes) as well as the x52.

2)In the control panel for the x52 do you get full scale deflection for the js in both x and y axis?

Thanks


1a. No
1b. No - USB pro peds here

2. I don't remember. Went out and bought another X45 as I couldn't hit jack with the X52, too much play
Logged
"Masters of the Air" Scenario - JG27


Intel Core i7-13700KF | GIGABYTE Z790 AORUS Elite AX | 64GB G.Skill DDR5 | 16GB GIGABYTE RTX 4070 Ti Super | 850 watt ps | pimax Crystal Light | Warthog stick | TM1600 throttle | VKB Mk.V Rudder

Offline eagl

  • Platinum Member
  • ******
  • Posts: 6769
X52 questions
« Reply #2 on: February 28, 2005, 05:29:23 PM »
If you set up the X52 rotary to be an analog input, AH should see it.  It all depends on how you program it.  If you don't load a program, it may or may not detect it.  I just don't know.  I know that if I don't program my x36, AH sees all the analog parts as analog inputs, but I usually program them as digital keypressers so then AH doesn't see them.
Logged
Everyone I know, goes away, in the end.

Offline ALF

  • Silver Member
  • ****
  • Posts: 1208
      • http://www.mikethinks.com
X52 questions
« Reply #3 on: February 28, 2005, 09:58:57 PM »
X52 sees both rotaries as joystick axis, the slider too.  

If you are not getting full defelction...return it...its defective.
Logged

Offline Tilt

  • Platinum Member
  • ******
  • Posts: 7358
      • FullTilt
X52 questions
« Reply #4 on: March 01, 2005, 04:47:43 AM »
Thanks..........I think its going back.

The throttle hat is porked (it cant see any left movement)

and the js will not give FSD to the right in the control panel.

Further playing with the stick whilst in control panel there seems to be a significant dead zone even when the dead zone is set to minimum.


Whilst Rotary 2 is fully functional in windows control panel AH cannot see it. It does not appear in the AH "select joystick" window at all.

All other analogs on the X52 and my pedals appear correctly.

Total analogs including the main POV (which gives analog numeric values) number 10 (3 from pedals, 7 from x52) if recognised rotary 2 would be the 11th.
« Last Edit: March 01, 2005, 04:57:01 AM by Tilt »
Logged
Ludere Vincere

Offline Tilt

  • Platinum Member
  • ******
  • Posts: 7358
      • FullTilt
X52 questions
« Reply #5 on: March 01, 2005, 01:13:31 PM »
Alf do you have any usb pro pedals attached.......or any other gaming device that AH uses whilst you also use the X52?
Logged
Ludere Vincere

Offline Eagler

  • Plutonium Member
  • *******
  • Posts: 18232
X52 questions
« Reply #6 on: March 01, 2005, 02:37:27 PM »
the huge deadzone was the reason I went back to X45
Logged
"Masters of the Air" Scenario - JG27


Intel Core i7-13700KF | GIGABYTE Z790 AORUS Elite AX | 64GB G.Skill DDR5 | 16GB GIGABYTE RTX 4070 Ti Super | 850 watt ps | pimax Crystal Light | Warthog stick | TM1600 throttle | VKB Mk.V Rudder

Offline wasq

  • Silver Member
  • ****
  • Posts: 1610
      • Photos
X52 questions
« Reply #7 on: March 01, 2005, 03:17:11 PM »
1) I have X52, and can see both rotaries. I have 3 USB controllers; X52, Logitech wheel and a joypad. I'm using the pedals from the wheel with AH.
2) I get full scale. If you don't, it's probably a failure in the stick.
Logged

Offline ALF

  • Silver Member
  • ****
  • Posts: 1208
      • http://www.mikethinks.com
X52 questions
« Reply #8 on: March 01, 2005, 04:57:44 PM »
Quote
Originally posted by Tilt
Alf do you have any usb pro pedals attached.......or any other gaming device that AH uses whilst you also use the X52?


I have CH Pro peddals (thanks 2003 con:D )....I also have a nostromo pad....because they are all USB, any program that can recognize seperate controlers is fine (al la Aces High).

Some older games that do NOT allow multiple controls will not let you use the rudders...but all current sims worth a crap are fine (IE: All the IL2 games etc)
Logged

Offline Muddie

  • Copper Member
  • **
  • Posts: 136
What replacement
« Reply #9 on: March 03, 2005, 02:07:35 PM »
So you getting another X52 or what?




Quote
Originally posted by Tilt
Thanks..........I think its going back.

The throttle hat is porked (it cant see any left movement)

and the js will not give FSD to the right in the control panel.

Further playing with the stick whilst in control panel there seems to be a significant dead zone even when the dead zone is set to minimum.


Whilst Rotary 2 is fully functional in windows control panel AH cannot see it. It does not appear in the AH "select joystick" window at all.

All other analogs on the X52 and my pedals appear correctly.

Total analogs including the main POV (which gives analog numeric values) number 10 (3 from pedals, 7 from x52) if recognised rotary 2 would be the 11th.
Logged

Offline Tilt

  • Platinum Member
  • ******
  • Posts: 7358
      • FullTilt
Re: What replacement
« Reply #10 on: March 03, 2005, 02:29:06 PM »
Quote
Originally posted by Muddie
So you getting another X52 or what?


All I can say as of today is that its gone back to Saitek who have promiced a fix or a new stick by the end of next week.

Meanwhile a really old MS sidewinder  sits before me.
Logged
Ludere Vincere

Offline Muddie

  • Copper Member
  • **
  • Posts: 136
Re: Re: What replacement
« Reply #11 on: March 03, 2005, 04:59:49 PM »
Then is it accurate to say, 'you like the stick, if it would only work'?

Mud

Quote
Originally posted by Tilt
All I can say as of today is that its gone back to Saitek who have promiced a fix or a new stick by the end of next week.

Meanwhile a really old MS sidewinder  sits before me.
Logged
Pages: [1]   Go Up
« previous next »