Author Topic: X45 Calibrate (Read 1115 times)

99taylor · « **on:** January 27, 2006, 02:55:25 PM »

I use the X45 without the software, and I forgot how to Calibrate my stick. Tried contol panel to controllers did not see anything for calibration do I need the software installed?

NHawk · « **Reply #1 on:** January 27, 2006, 03:46:31 PM »

Go to Control Panel
Double click Game Controllers
Select Saitek X45
Click Properties
Click Calibrate Tab

99taylor · « **Reply #2 on:** January 28, 2006, 09:16:34 AM »

there in no calibrate tab!!!!

AWMac · « **Reply #3 on:** January 28, 2006, 11:47:21 AM »

Stop crawling into homes late at night seeking joysticks and BUY the dam stick... comes with the softwear.

Mac

99taylor · « **Reply #4 on:** January 28, 2006, 11:51:26 AM »

i have the software and loaded it, still no calibrate tab; stop wasting my time with stupid posts!!!

38ruk · « **Reply #5 on:** January 28, 2006, 12:50:19 PM »

Is there a settings tab , should be the first tab when u go to control panel / game controllers/ select ur stick / properties/ settings tab / should be a calibrate button next to restore defaults .

99taylor · « **Reply #6 on:** January 28, 2006, 12:57:58 PM »

just a test tab and a about tab.

RSLQK186 · « **Reply #7 on:** January 28, 2006, 01:09:55 PM »

I have the X-45 and XP. You cannot calibrate the X-45 in windows. The settings tab does not exist for it. Was brought to my attention by OOZ http://www.hitechcreations.com/forums/showthread.php?s=&threadid=155836 and searched for something to dispute it. Came up dry. If any X-45 users can, please let me know.

SNO · « **Reply #8 on:** January 28, 2006, 01:27:17 PM »

Control panel, game controllers, highlight your stick, properties, hit ok, settings tab, then the calibrate should be on this screen. This was without the software loaded, might not be here but in the software settings when software is loaded.

99taylor · « **Reply #9 on:** January 28, 2006, 01:40:32 PM »

with or without software loaded still no settings tab.

Schatzi · « **Reply #10 on:** January 28, 2006, 01:59:47 PM »

Got my X45 today. No calibration button on windows either. But works fine just calibrating it ingame.

NHawk · « **Reply #11 on:** January 28, 2006, 02:00:01 PM »

Quote

Originally posted by RSLQK186
I have the X-45 and XP. You cannot calibrate the X-45 in windows. The settings tab does not exist for it. Was brought to my attention by OOZ http://www.hitechcreations.com/forums/showthread.php?s=&threadid=155836 and searched for something to dispute it. Came up dry. If any X-45 users can, please let me know.

I can, there is a calibrate tab for the JS in windows XP.

Keep in mind, I ONLY load the drivers, I don't load the programming software. That might be the difference.

I am running the current drivers.. 4.3.3.1727

Panzzer · « **Reply #12 on:** January 28, 2006, 05:49:04 PM »

I have both the drivers and the programming software loaded... This is the screen I get in Control Panel | Game Controllers | Saitek X45 Flight Controller USB -- and "Properties".

Oops, got a bit of this thread in the background as well.

There is "Calibration" tab. Maybe you should try to unplug the joystick, uninstall, download the latest drivers and install them & then plug the joystick in..?

RSLQK186 · « **Reply #13 on:** January 28, 2006, 08:44:40 PM »

Removed the device, drivers, SST and profiler. Put in drivers from CD and later the current ones from saitek site. Still no calibate tap. Must be a HP thing. But then again everything stays centered till I move them and slide evenly till just before the end of travel when they reach the edge of the box on the screen. Had it for a year so I shold start to see some wear soon. But I beleave AH calibration will handle that better than windows will anyway(I hope).

OOZ662 · « **Reply #14 on:** January 28, 2006, 08:56:59 PM »

Actually, a little while after that thread, a calibration tab just magically appeared in my Windows setup. That was my 6th or 7th X45 (long story) so it may have been a driver update.