« previous next »
Pages: [1]   Go Down

Author Topic: question, going ffrom win 98 to win 2k OS  (Read 963 times)

Offline -ammo-

  • Platinum Member
  • ******
  • Posts: 5124
question, going ffrom win 98 to win 2k OS
« on: September 23, 2001, 05:25:00 PM »
Hi all, I am wanting to go from windows 2000 OS and I currently am running Win 98. Now, my question is will all my hardware work with windows 2k? here is a list of my machines components--

Promise® Ultra66 PCI IDE Controller Card CCD001141-00

Processor- Intel Pentium PIII 500MHz Katmai
OLGA Core:100MHz Cache(512K L2) CPU001304-00

DVD-ROM Toshiba 4.8x/32x IDE DVD CD ROM DVD001012-00

Floppy Drive Panasonic 3.5 in. 1.44 MB Floppy Drive FDD001012-01

Iomega Zip Removeable Media Disk 100 MB IDE
HDD001104

Hard Drive Western Digital Revolution 15.3GB Ultra DMA/66 IDE Hard Drive HDI001286-00 Misc I/O

NMB Flat Win95 English Keyboard KBR001067-01

Motherboard Seattle 2 Pentium II 440BX ATX Motherboard with Integrated Components
MBD001109-04

Sound Card Seattle 2 Pentium II 440BX ATX Motherboard with Integrated Components
MBD001109-04
MED001260-00

Advent AV009 Mini Powered Stereo Speakers
MMP001029-00

Monitor 17 in. Sony CPD-2401 Trinitron OSD Monitor MNN001093-01

Memory 8M X 64 (64MB) MOD001356-00

Microsoft Intellimouse MOU001015-01

Operating System Windows 98 on CD
 
Iomega ATAPI Zip 100MB IDE Drive (Oprah II)
RMI001015-01

Modem U.S. Robotics X2 (Akita) Data/Fax Modem
SCM001369-04

Sound Card Creative Labs SB Live! Value EMU10K1 Sound Card
SCM001446-00

vid card Geforce2 Mx by invidea (machine origionally came with a diamond viper 550)

ATI DVD PCI Decoder Card VCD001337-00


Ok, can you guys see any problems with going from win98 to win2k? My friend sancho has given me some advice too. I just have been at the creatiuve labs support site to DL a win2k driver for my sound blaster live, and it gave me a message that it will not work with 5.1 version cards. uh oh, i am thinking that my Sound card will not work with win2k :( anyone confirm it?   this has been the only thing I have researched so far. I hope my vid card will work with win2k, as also the rest of my components. What do you think?

experts speak up please :)
Logged
Commanding Officer, 56 Fighter Group
Retired USAF - 1988 - 2011

Offline Staga

  • Parolee
  • Platinum Member
  • ******
  • Posts: 5334
      • http://www.nohomersclub.com/
question, going ffrom win 98 to win 2k OS
« Reply #1 on: September 23, 2001, 05:40:00 PM »
Keep Win98 and use the money to update your cpu/mobo/memory.
Logged

Offline 214thCavalier

  • Silver Member
  • ****
  • Posts: 1929
question, going ffrom win 98 to win 2k OS
« Reply #2 on: September 23, 2001, 08:07:00 PM »
Logged

Offline -ammo-

  • Platinum Member
  • ******
  • Posts: 5124
question, going ffrom win 98 to win 2k OS
« Reply #3 on: September 23, 2001, 08:38:00 PM »
thx fellas.

Actually I got win2k for a very small fee....very small.
Logged
Commanding Officer, 56 Fighter Group
Retired USAF - 1988 - 2011

Offline SKurj

  • Gold Member
  • *****
  • Posts: 3630
question, going ffrom win 98 to win 2k OS
« Reply #4 on: September 23, 2001, 09:09:00 PM »
eeeek ammo, i am not well versed on 2k yet.  All i can suggest is you visit each component manuafacturer's website and see what they have to say.

Don't know how good 2k is for gaming, guess it depends on what you do with your PC, if all you do is play AH, i'd stick with 98...


My thots..

SKurj
Logged

Offline Gunthr

  • Gold Member
  • *****
  • Posts: 3043
      • http://www.dot.squat
question, going ffrom win 98 to win 2k OS
« Reply #5 on: September 23, 2001, 09:09:00 PM »
Ammo, I recommend that you do a clean install of Win2k on a separate partition so you can dual boot. That way, you can take your time getting the Win2k installation/drivers and all that up to speed.

Just make sure you use the FAT 32 file system on both OS's.

I should add that the Win2k Setup will scan your machine and tell you what you need to update, and what will be incompatible - before you get to the actual installation of files....  So you can get started now  :)

I keep Win98SE on its own partition just for AH, for the little bit better performance.

[ 09-23-2001: Message edited by: Gunthr ]
Logged
"When I speak I put on a mask. When I act, I am forced to take it off."  - Helvetius 18th Century

Offline bloom25

  • Silver Member
  • ****
  • Posts: 1675
question, going ffrom win 98 to win 2k OS
« Reply #6 on: September 23, 2001, 10:19:00 PM »
Check out www.ntcompatible.com  , there is a list of compatible hardware with xp and 2k.
Logged

Offline -lynx-

  • Copper Member
  • **
  • Posts: 340
question, going ffrom win 98 to win 2k OS
« Reply #7 on: September 24, 2001, 04:18:00 AM »
Gunthr - why FAT32? I run Win98SE/W2K setup and FAT32 is only on Win98 partition...

SB Live! here - no sweat under W2K Not sure how different 5.1 is though...
Logged

Offline Gunthr

  • Gold Member
  • *****
  • Posts: 3043
      • http://www.dot.squat
question, going ffrom win 98 to win 2k OS
« Reply #8 on: September 24, 2001, 06:41:00 AM »
Lynx, I run FAT32 on both so that I can move files back and forth between OS's... its more convenient  :)
Logged
"When I speak I put on a mask. When I act, I am forced to take it off."  - Helvetius 18th Century

Offline MrRiplEy

  • Copper Member
  • **
  • Posts: 106
      • http://altavista.net
question, going ffrom win 98 to win 2k OS
« Reply #9 on: September 24, 2001, 08:59:00 AM »
I kept W98 on the side of w2k, but after a couple months I decided to delete it..

I haven't missed it.

Just make sure you get all the available updates + sp2 from microsoft.

W2k has worked really great for me, and my computer is already 2 years old.

SB live, MS PP, Geforce256, Abit BH6, IBM hd.. all work with no probs whatsoever.

At first I had some minor trouble with drivers.. But now situation has evolved a lot and I can't say I have a bad thing to say about w2k.


Edit: Ok, except the long boot-up time.. Then again, you don't need to boot that often using w2k.

[ 09-24-2001: Message edited by: MrRiplEy ]
Logged

Offline Sancho

  • Silver Member
  • ****
  • Posts: 1043
      • http://www.56thfightergroup.com
question, going ffrom win 98 to win 2k OS
« Reply #10 on: September 24, 2001, 11:41:00 AM »
Ammo, have you found out if your CH gear will work with Win2k?  I haven't seen any Win2k drivers for your stuff on CH's site.  I think that is the only possible roadblock to your upgrade.
Logged

Offline -ammo-

  • Platinum Member
  • ******
  • Posts: 5124
question, going ffrom win 98 to win 2k OS
« Reply #11 on: September 24, 2001, 11:51:00 AM »
Quote
Originally posted by Sancho:
Ammo, have you found out if your CH gear will work with Win2k?  I haven't seen any Win2k drivers for your stuff on CH's site.  I think that is the only possible roadblock to your upgrade.

good question and I know you asked earlier. I dont know for sure but right now in win98 my gear is listed as a  "3 axis" joystick, rather than a "CH Combat stick". I am assuming (always a bad idea) that i will do the same thing in win2k. I need to ask within this forum if these win2k users are using CH stuff and any anomolies with it.
Logged
Commanding Officer, 56 Fighter Group
Retired USAF - 1988 - 2011

Offline CRASH

  • Copper Member
  • **
  • Posts: 186
question, going ffrom win 98 to win 2k OS
« Reply #12 on: September 27, 2001, 05:14:00 PM »
Hi Ammo,
     I was reading some of your other posts and it looks like you may lack some of the basic knowledge necessary to start building and or tearing apart your current pc.  The stuffs easy as hell to learn, just hit the base library or amazon.com and pick up the latest book on building a pc.  It'll really help to fill in some of the basic info your gonna need to keep you from pulling ur hair out while trying to figure out why it won't work, and bein' a weapons guy I figure we'd all be alot safer if you stayed calm and unfrazzled  :)

CRASH


 
Quote
Originally posted by -ammo-:
Hi all, I am wanting to go from windows 2000 OS and I currently am running Win 98. Now, my question is will all my hardware work with windows 2k? here is a list of my machines components--

Promise® Ultra66 PCI IDE Controller Card CCD001141-00

Processor- Intel Pentium PIII 500MHz Katmai
OLGA Core:100MHz Cache(512K L2) CPU001304-00

DVD-ROM Toshiba 4.8x/32x IDE DVD CD ROM DVD001012-00

Floppy Drive Panasonic 3.5 in. 1.44 MB Floppy Drive FDD001012-01

Iomega Zip Removeable Media Disk 100 MB IDE
HDD001104

Hard Drive Western Digital Revolution 15.3GB Ultra DMA/66 IDE Hard Drive HDI001286-00 Misc I/O

NMB Flat Win95 English Keyboard KBR001067-01

Motherboard Seattle 2 Pentium II 440BX ATX Motherboard with Integrated Components
MBD001109-04

Sound Card Seattle 2 Pentium II 440BX ATX Motherboard with Integrated Components
MBD001109-04
MED001260-00

Advent AV009 Mini Powered Stereo Speakers
MMP001029-00

Monitor 17 in. Sony CPD-2401 Trinitron OSD Monitor MNN001093-01

Memory 8M X 64 (64MB) MOD001356-00

Microsoft Intellimouse MOU001015-01

Operating System Windows 98 on CD
 
Iomega ATAPI Zip 100MB IDE Drive (Oprah II)
RMI001015-01

Modem U.S. Robotics X2 (Akita) Data/Fax Modem
SCM001369-04

Sound Card Creative Labs SB Live! Value EMU10K1 Sound Card
SCM001446-00

vid card Geforce2 Mx by invidea (machine origionally came with a diamond viper 550)

ATI DVD PCI Decoder Card VCD001337-00


Ok, can you guys see any problems with going from win98 to win2k? My friend sancho has given me some advice too. I just have been at the creatiuve labs support site to DL a win2k driver for my sound blaster live, and it gave me a message that it will not work with 5.1 version cards. uh oh, i am thinking that my Sound card will not work with win2k  :( anyone confirm it?   this has been the only thing I have researched so far. I hope my vid card will work with win2k, as also the rest of my components. What do you think?

experts speak up please  :)
Logged

Offline -ammo-

  • Platinum Member
  • ******
  • Posts: 5124
question, going ffrom win 98 to win 2k OS
« Reply #13 on: September 27, 2001, 07:38:00 PM »
Quote
Originally posted by CRASH:
Hi Ammo,
     I was reading some of your other posts and it looks like you may lack some of the basic knowledge necessary to start building and or tearing apart your current pc.  The stuffs easy as hell to learn, just hit the base library or amazon.com and pick up the latest book on building a pc.  It'll really help to fill in some of the basic info your gonna need to keep you from pulling ur hair out while trying to figure out why it won't work, and bein' a weapons guy I figure we'd all be alot safer if you stayed calm and unfrazzled   :)

CRASH


 

LOL so true crash ;)

I got a clean install of Win2K, yippee!!

But heres the first problem, win2K didnt recognize my vid card as a geforce2 MX. Device manager says I have a video controller (VGA compatable). Max is 16 colors, 800x600. I have the drivers available, but under the adapter tab, it doesnt give me the button to update my driver. I gotta go get some rogaine to replace my hair.
Logged
Commanding Officer, 56 Fighter Group
Retired USAF - 1988 - 2011

Offline SKurj

  • Gold Member
  • *****
  • Posts: 3630
question, going ffrom win 98 to win 2k OS
« Reply #14 on: September 27, 2001, 10:58:00 PM »
I just had to do this in NT ammo.  I think.. go to display properties, adapter, change, select from list, then say Have Disk, and point it to your new driver files

SKurj
Logged
Pages: [1]   Go Up
« previous next »