Author Topic: gear heads....  (Read 851 times)

Offline homersipes

  • Silver Member
  • ****
  • Posts: 1238
Re: gear heads....
« Reply #15 on: February 14, 2012, 07:13:18 AM »
what kinda car is it?  Is you engine light on?  I always start with a fresh tuneup, unless the engine light is on, then take it and have it read and replace the parts.  Never had any real issues that a tune up didnt fix.

Offline ROC

  • Aces High CM Staff (Retired)
  • Platinum Member
  • ******
  • Posts: 7700
Re: gear heads....
« Reply #16 on: February 14, 2012, 11:43:47 AM »
My local Autozone and Kragen both have free use of the diagnostic tool to check for fault codes.  Has been pretty reliable for me to quickly get to problems on my cars over the years.
ROC
Nothing clever here.  Please, move along.

Offline MaSonZ

  • Gold Member
  • *****
  • Posts: 2074
Re: gear heads....
« Reply #17 on: February 16, 2012, 02:52:46 PM »
well...... it appears it was air AND ignition. bad throttle body gasket meant I wasn't getting adequete air. it so happens my spark plugs were completely shot too. the fuel wasn't burning in my combustion chamber, so when I went to start it it the car would flood out a little. it all makes sense now. 


$100 later that I didn't have...:bhead
"Only the dead have seen the end of war" - Plato
HogDweeb

Offline CAP1

  • Radioactive Member
  • *******
  • Posts: 22287
      • The Axis Vs Allies Arena
Re: gear heads....
« Reply #18 on: February 16, 2012, 03:36:19 PM »
well...... it appears it was air AND ignition. bad throttle body gasket meant I wasn't getting adequete air. it so happens my spark plugs were completely shot too. the fuel wasn't burning in my combustion chamber, so when I went to start it it the car would flood out a little. it all makes sense now. 


$100 later that I didn't have...:bhead


 you were getting too much air if that gasket was leaking. possibility of an overly lean mixture burning the plugs out.
ingame 1LTCAP
80th FS "Headhunters"
S.A.P.P.- Secret Association Of P-38 Pilots (Lightning in a Bottle)

Offline Shuffler

  • Radioactive Member
  • *******
  • Posts: 27070
Re: gear heads....
« Reply #19 on: February 16, 2012, 03:55:22 PM »
you were getting too much air if that gasket was leaking. possibility of an overly lean mixture burning the plugs out.

Yup. Chevy TBI trucks used to have that issue. Folks would not bring their truck in for it's first checkup. The throttle body never got retorqued. The gasket eventually failed causing hard starts and high idle.


Fixed many of those.
80th FS "Headhunters"

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)

Offline spammer

  • Silver Member
  • ****
  • Posts: 1210
Re: gear heads....
« Reply #20 on: February 16, 2012, 08:45:34 PM »
It could be something as simple as a fuel filter.

Offline kamori

  • Silver Member
  • ****
  • Posts: 849
Re: gear heads....
« Reply #21 on: February 17, 2012, 04:01:23 PM »
Did you ever post what make, year, engine it is?

Kam

Offline Shuffler

  • Radioactive Member
  • *******
  • Posts: 27070
Re: gear heads....
« Reply #22 on: February 17, 2012, 04:44:48 PM »
Did you ever post what make, year, engine it is?

Kam

yes he did... import.
80th FS "Headhunters"

S.A.P.P.- Secret Association Of P-38 Pilots (Lightning In A Bottle)