Author Topic: Re: Graphic issues near coast. (Read 2692 times)

LCADolby · « **Reply #30 on:** February 20, 2013, 07:12:56 AM »

Quote from: Ninthmessiah on February 17, 2013, 08:40:05 PM

I get the following graphic issues when I'm low level and near the coast.

(Image removed from quote.)

(Image removed from quote.)

(Image removed from quote.)

I can't remember what map these shots were taken on, but the problem isn't unique to a particular map. It also happens in planes too.

I get the same.

ATi Radeon HD5770

I updated the driver to try and clear it... Didn't work.

It's really irritating in LVTs, flickering etc.

katanaso · « **Reply #31 on:** February 20, 2013, 08:03:08 AM »

Quote from: Skuzzy on February 20, 2013, 06:56:40 AM

I just tried it, at home, on my 7950 (3GB of video RAM). I get Z fighting issues at the water edge, but not what the original poster is seeing at all.

The Z fighting is there as long as 'Detailed Water' is enabled, regardless of any other option.

I believe I am running the 64 bit Catalyst 12.6 or 12.8 drivers (DXDIAG ATI Version shows 8.982.0.0), without the Catalyst Control Center and sound driver installed.

bustr, most of what you are describing sounds like resource and Internet connection issues. See me in the Tech Support forum about it.

Skuzzy,

Did you test it in a plane, or in a LVT? I only see it when in a LVT. Low planes, even PT boats, are fine.

Thanks.

Skuzzy · « **Reply #32 on:** February 20, 2013, 08:59:16 AM »

I was in a Jeep. I'll try an LVT tonight.

DarkHawk · « **Reply #33 on:** February 20, 2013, 12:00:22 PM »

have the same issue started two updates ago, just turn off detail water woorks see this near shore in noe run and in lvts

Display Devices
---------------
Card name: AMD Radeon HD 6670
Manufacturer: Advanced Micro Devices, Inc.
Chip type: AMD Radeon Graphics Processor (0x6758)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_6758&SUBSYS_318C1682&REV_00
Display Memory: 3818 MB
Dedicated Memory: 2030 MB
Shared Memory: 1787 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: T27B350
Monitor Id: SAM0945
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: HDMI
Driver Name: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver File Version: 8.17.0010.1172 (English)
Driver Version: 9.12.0.0
DDI Version: 11
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 12/19/2012 15:08:04, 1151488 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-2418-11CF-A671-8611BEC2C535}
Vendor ID: 0x1002
Device ID: 0x6758
SubSys ID: 0x318C1682
Revision ID: 0x0000
Driver Strong Name: oem21.inf:ATI.Mfg.NTamd64.6.1:ati2mtag_NI:9.12.0.0:pci\ven_1002&dev_6758
Rank Of Driver: 00E62001
Video Accel: ModeMPEG2_A ModeMPEG2_C

dhawk

715 · « **Reply #34 on:** February 20, 2013, 02:29:58 PM »

I see it mostly in LVTs but I also see it when flying very low noe over the water near the coastline in, say, a C47. Also, it looks very much like the OPs pics and it flickers in and out like Z-fighting.

vgazoo · « **Reply #35 on:** February 20, 2013, 10:55:12 PM »

I too am having the same issues along to coast line while in an lvt. By turning off the detailed water eliminates this glitch. I noticed this, (sand to water), effect since the last patch. I merely leave detailed water off to solve this issue.

morfiend · « **Reply #36 on:** February 21, 2013, 03:50:14 PM »

Something I noticed last night,the shadows under the trees give an odd flickering effect. The strange thing is I have shadows turned off,sef shadows,shadows on buildings,etc.

I wonder if this is related to the Z fighting,as I have no idea what that is or does.

bustr · « **Reply #37 on:** February 21, 2013, 07:31:14 PM »

Quote from: Skuzzy on February 20, 2013, 06:56:40 AM

bustr, most of what you are describing sounds like resource and Internet connection issues. See me in the Tech Support forum about it.

I fixed all of that by uninstalling both my Plantronics 780 and the game. First reinstalling the plantronics then a full install of the game. The game dosen't like the Dolby option with the 780 at all. If anything the less speakers I virtulise the better the game likes it in terms of resource problems. I'm getting VOX or occasional texture stutter hangs with the default video settings. I disabled grass and bumpmapping buildings. I still see the Z-fighting low on shores in the water or sitting in a GV looking at bomb craters in the concrete.

I'm doing the new sound beta. It detects the plantronics sources correctly and sources the speakers through the windows configuration. I'm getting a much better game experience with it.

Randy1 · « **Reply #38 on:** February 22, 2013, 06:14:38 AM »

I posted before I had not had the problem. Last night I bailed and came down on the beach. Just as others posted, the graphics went wonky and my guy was laying on his side after landing.

potsNpans · « **Reply #39 on:** February 22, 2013, 03:26:41 PM »

I'm glad its not just me, I thought my HIS readeon 6870 was failing.

Randy1 · « **Reply #40 on:** February 26, 2013, 07:17:51 AM »

Quote from: Randy1 on February 22, 2013, 06:14:38 AM

I posted before I had not had the problem. Last night I bailed and came down on the beach. Just as others posted, the graphics went wonky and my guy was laying on his side after landing.

I installed the beta drivers and the problem is much worse. I did not see it from the plane before the beta drivers but now I do when I get near any water.

HD 7750

icepac · « **Reply #41 on:** February 26, 2013, 09:41:23 AM »

after reinstalling drivers, did you directx the machine again or at least run dxdiag to check for issues?

SmokinLoon · « **Reply #42 on:** February 26, 2013, 11:05:10 AM »

I get the same thing. I get a lot of "sand" lines in the water regardless if I am in an aircraft or LVT.

Randy1 · « **Reply #43 on:** February 26, 2013, 02:35:35 PM »

Here is what worked for me. I turned off detailed water and turned on bump map terrain. I actually like the water better that way anyway. It may not work for y'all but it is worth a try.

I went offline practice set the plane at 200 feet and auto level and started playing with the graphic detail setting until I got it to go away.

I have a HD 7750 using the beta drivers.

hellwolf · « **Reply #44 on:** February 27, 2013, 02:09:24 PM »

Was having this problem, I5 Hd5770, 12 gb ram.

Tried all settings and driver options with no luck, then by serendipity, I seem to have fixed the problem.

I believe what actually worked, and also helped with smoothing out micro stutters, was to uncheck enable ground clutter. I assumed that disable ground clutter in flight would have been enough but disabling it all together really makes a huge difference. More of a hit than than detailed water or reflections or bump mapping anything. Not sure if its a bug or the fact that ground clutter causes a huge drain on cpu/ graphics.