replacing CH Fighterstick pots

[Max]

Can anybody walk me through the process? A Google search and CH forum only turned up a wiring diagram.

I see where the 4 screws under the rubber corner pads come out. Do I also remove the 3 visible screws on the base bottom? Once inside the case bottom, what's the procedure?

Thanks!

[The Fugitive]

If you dig around at the CH-Hanger you might find some pictures or other info there.

http://www.ch-hangar.com/forum/

[Max]

That's where I found the wiring diagram. Did a search of the hardware forum as well as dialing back thru the pages. No joy.

[Zerstorer]

These pics from my google search may help:

 http://www.google.com/search?q=fighterstick+disassemble&hl=en-US&source=lnms&tbm=isch&sa=X&ei=YHvxU5DHGMeMyAShoYGAAQ&ved=0CAoQ_AUoAw&biw=600&bih=1024

[Max]

Thanks Z! (the gent kind enough to hook me up with the replacement pots and refused compensation)

I guess the "disassemble" tag was the key word I missed. 

[Zerstorer]

Thanks Z! (the gent kind enough to hook me up with the replacement pots and refused compensation)

I guess the "disassemble" tag was the key word I missed. 

No worries...hope the pots and links help get you running again soon! 

Google is your friend....or fiend...I've never quite figured out which!   

 

[Ack-Ack]

Thanks Z! (the gent kind enough to hook me up with the replacement pots and refused compensation)

I guess the "disassemble" tag was the key word I missed. 

Just make sure that you remember which color wire goes to which contact on the potentiometer. 

ack-ack