after installing new thrustmaster pedals..and then uninstalling...

[lunaticfringe]

throttle is reversed, I am using a CH fighter stick, a X-52 throttle with the thumb wheel for rudder control. everything was working perfect.
Then I received a Thrustmaster Pedal assy as a gift. downloaded the drive
h ooked them up-spawned a fighter and all the guns started fireing automatically, if I pressed the right toe brake the main guns would stop but secondary's would fire-if I pressed the left toe brake the main guns would fire.so I disconnected the peddles. NOW my throttle operates backwards-pushing forward slows it down to a stop and pulling back speeds it up. can anything help?

[FLS]

When you hook up the pedals the toe brakes may get mapped to guns, just remap them to toe brakes.

The throttle axis can be reversed on the advanced page.

I doubt you need any drivers for the pedals. Just calibrate and assign them.

[TWCAxew]

h ooked them up-spawned a fighter and all the guns started fireing automatically, if I pressed the right toe brake the main guns would stop but secondary's would fire-if I pressed the left toe brake the main guns would fire.

First of all I want to say I had similar issues especially with the paddels. There is something wrong with the default mapping of these paddels. You need to go into the settings and remove everything that I assigned to the paddels. Save it and go back into the map controllers. Assign the axis to the paddels. Now they should work fine. I like mine to be reversed however. If you like the same click once on the axis you want to reverse and go to the top left of the clipboard and there should be something saying deadbands or advanced.(I am away from my computer) here you want to hit something like reverse axis. The same should work for your trothle.

Hopes this helps Luna 

DutchVII

[Skuzzy]

If you install software for a stick/device, then all bets are off as to how it may get mapped, by default.

That said, Dutch is right.  Just re-map the inputs as you like.

[TequilaChaser]

Going all the way back to AH1, I've had to use the "reverse axis" check box for both my CH pro throttle and the wheel that I use for rpm's on my CH fighterstick

When I've plugged in a Thrustmaster throttle or an X52 throttle, had to do the same thing....

Edit: I was not using any software for any of the devices

TC

[lunaticfringe]

When you hook up the pedals the toe brakes may get mapped to guns, just remap them to toe brakes.

The throttle axis can be reversed on the advanced page.

I doubt you need any drivers for the pedals. Just calibrate and assign them.

  thanks man I reversed the axis and now my throttle work right