Author Topic: AHEDITOR 2 error message (Read 1113 times)

anibal · « **on:** October 16, 2001, 10:33:00 PM »

I posted this on the Bug Reports and Technical Support forums but didn't get any answer
I have AH EDITOR 103 installed and running ok.
I downloaded AHEDIT200.EXE, installed it following the instructions and when I click on the menu Icon or directly on the aheditor2.exe file I get this fault page error message:

"AHEDITOR2 provocó un error de página no válida en el
módulo AHEDITOR2.EXE de 0167:0041242f.
Registros:
EAX=00000065 CS=0167 EIP=0041242f EFLGS=00010246
EBX=00000000 SS=016f ESP=00e9e9c8 EBP=000002f4
ECX=00000000 DS=016f ESI=000002d4 FS=2d57
EDX=00000065 ES=016f EDI=00000000 GS=0000
Bytes en CS:EIP:
,02x ,02x ,02x ,02x ,02x ,02x ,02x ,02x ,02x ,02x ,02x ,02x ,02x ,02x ,02x ,02x
Volcado de pila:
,08x ,08x ,08x ,08x ,08x ,08x ,08x ,08x ,08x ,08x ,08x ,08x ,08x ,08x ,08x ,08x "

System:
- Pentium III 450Mhz, VIA chipset (all up to date drivers)
- i740 AGP 8MB video card (latest drivers)
- 256MB RAM
- Windows 98 SE (en Español) w/ DirectX 8
- Virtual memory 256MB (swap file).
Aces High runs ok in ALL resolutions, Online and Offline.
It is a bug or can I do something to run the Editor?
Thanks.

[ 10-16-2001: Message edited by: Gral Anibal ]

pokie · « **Reply #1 on:** October 16, 2001, 10:54:00 PM »

Hello Gral. Anibal.

Did you try to reinstall the editor2 again.

Pokie

Odin · « **Reply #2 on:** October 16, 2001, 11:51:00 PM »

Hi I have editor version 1.03 for Aces High version 1.07 patch 3 is this AHeditor 2?

<S> VonBeer

anibal · « **Reply #3 on:** October 17, 2001, 12:39:00 AM »

I reinstalled AHEDITOR 2= same problem.
THen, I deleted all files, Installed Editor 103 then installed Editor 2 (as instructions said)= allways same problem, same error message.

pokie · « **Reply #4 on:** October 17, 2001, 11:27:00 AM »

Hello Gral Anibal

Hope you haven't pulled all your hair out yet.

Just putting 2 post that were placed in this form by Hamish.
Don't know if he fix his problem.
http://www.hitechcreations.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=55&t=000290
http://www.hitechcreations.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=55&t=000291

Also I see that you are running Windows 98 SE the same as Hamish. I'm on WindowsME

1) Try setting your desktop screen and the video setting in aceshigh both to 800 X 600 16 Bits and see if that does anything.

2) Also are you using the Aces High version 1.08 patch 2 game.

3) Are you using DX8, if you answered yes to question #2 then maybe you could install it again.

I'll try to think of some more stuff but I'm not good with computer problems.

Maybe you can email or post a message to Hamish to see if he fix his problem.

Pokie

pokie · « **Reply #5 on:** October 17, 2001, 11:33:00 AM »

Quote

Originally posted by VonBeer:
Hi I have editor version 1.03 for Aces High version 1.07 patch 3 is this AHeditor 2?

<S> VonBeer

No MrBeer, the Aheditor2 is an add on to your 1.03 version.

Terrain Editor II Beta released Pyro 0 07-20-2001 12:43 PM

Here is the link to this message so you can read info and down load it.
http://www.hitechcreations.com/cgi-bin/ultimatebb.cgi?ubb=get_topic&f=3&t=000204

Pokie

Odin · « **Reply #6 on:** October 17, 2001, 04:23:00 PM »

Hiya Pokie
Coolness otw to get it now

Thx mate
~~Bee~~r

anibal · « **Reply #7 on:** October 18, 2001, 12:31:00 AM »

Pokie, thanks for your concern.
I tried and changed the configuration of both, computer, desktop resolution and AH Editor 2 video settings many times before posting this problem.
It seems to be a bug with certain configurations. Because this is a BETA release, I hope the next version solves this problem and includes the new objects and planes.

Here are the answers to your points:

1) Try setting your desktop screen and the video setting in aceshigh both to 800 X 600 16 Bits and see if that does anything.
- I did it in ALL possible resolutions and frame rates options.

2) Also are you using the Aces High version 1.08 patch 2 game.
- First installation was with 1.08 patch 1. I tried everything again with patch 2.

3) Are you using DX8, if you answered yes to question #2 then maybe you could install it again.
- Yes DirectX 8 is installed.

Hamish posted a similar problem, I will ask him if he found a solution.
On the meantime i am using the 103 version.

pokie · « **Reply #8 on:** October 18, 2001, 03:33:00 PM »

That's a shame Gral Anibal.

Hopefully the updated editor will work for you.

P.S. If you find a solution could you post it here.

Good Luck!

Pokie

Odin · « **Reply #9 on:** October 18, 2001, 04:44:00 PM »

Hiyas Im having no luck either mine says

A required .DLL file, D3D8.DLL was not found.

Guess I will have to hold my breath and wait for the next version too

<S> Beer

pokie · « **Reply #10 on:** October 26, 2001, 09:12:00 PM »

I never thought until now.

But you should check the curterr.cfg
located in the
C:\Program Files\HTC\aheditor\settings folder.

Make sure that it has a name of a terrain thats in your
C:\Program Files\HTC\aheditor\terrains folder.

If you don't the editor will get an error.

Also maybe you could try the latest dx8.1a
http://www.electic.com/cgi-bin/news/News/Stories/2001/09/29/10018003862.shtml

Pokie

[ 10-26-2001: Message edited by: pokie ]

anibal · « **Reply #11 on:** October 27, 2001, 10:08:00 PM »

Thanks Pokie,
curterr.cfg is ok.
AH 108 needs DX7, the editor (1.03 and 2) uses DX6 (same as AH107), i think.
I have the *official* DX8.0a from Microsoft, so i believe this is not a DirectX issue.
If I don't get an answer from HTC, I'll wait for the new Editor.

Quote

VonBeer
A required .DLL file, D3D8.DLL was not found.

"Señor Cerveza: Usted need Daeerekt Equis 8"
Install DirectX8 from Microsoft.