Author Topic: Object Editor Questions  (Read 1985 times)

Offline JimmyD3

  • Platinum Member
  • ******
  • Posts: 4015
Object Editor Questions
« on: July 30, 2022, 04:07:52 PM »
Are there any guidelines on the object editor? Can terrain tiles be modified?
Kenai77
CO Sic Puppies MWK
USAF 1971-76

Offline Easyscor

  • Plutonium Member
  • *******
  • Posts: 10899
Re: Object Editor Questions
« Reply #1 on: July 31, 2022, 12:17:08 AM »
Are there any guidelines on the object editor?
A guide? No, not for AHIII and I don't remember one for AHII.

That's for the bad news. For the good news...

Can terrain tiles be modified?
Yes. Okay to create new terrain tiles, objects, fields, ect. for any arena except the MA. If you have a specific MA idea, you should contact HT.

In no particular order ...

Most of what I learned about the OE was from using it. It isn't that hard, though the switching between placing live buildings on an object tile and adding/placing trees on the same tile is not intuitive and always takes me several attempts to make the switch.
In the early "Open Beta Test" forum you'll find discussions about how texture work. You can't do much without that info. For skinning buildings etc. See the Custom Skins forum. What applies to skins also applies to building though you can see some results with only the diffuse bitmap.

Custom Field and Strat objects are beyond the scope of this discussion as they start with 64 sub-objects per square mile to accommodate collisions. But keep in mind how your summer airfield will look surrounded by your custom terrain tiles.

Terrsets - start in the TE and export the terrset used in your currently loaded terrain.
Find the files in the "exports" folder iirc and inspect the results.
You'll find text files, bitmaps and subfolders.
My biggest (read as most frustrating) stumbling block was creating all the various bitmaps needed for the ground. There are grayscale bitmaps for things like gravel and cobblestone ground, and bitmaps for clumps of grass and tomatoes. These are called out in the appropriate exported text files, force them open in NotePad to view. The same applies to opening the speedtree files if you want to look at them too.
The OE can open the individual tiles (sand etc) as a package along with their associated parts.

Everything starts by creating a new tile even if you only want to convert a single new ac3d custom object to the game: The OE asks you to set the tiles properties, is it a terrain tile or an object, size and terrset etc. Save the empty tile before you begin, the OE will suggest a location folder.

For creating and adding a static plane, building etc., the OE can import an ac3d file (extension .ac).
To my knowledge, no one has attempted creating speedtree trees or objects.
Note that almost every AH building has an equivalent speedtree building for placement in a terrain tile.

For any tile, whether a new field layout, strat object or terrain tile, you must create 5 textures for each tile. That's 20 sets for a terrset. The last time I asked HT, he said I could not increase the size of the 508x508 bitmaps as the game combined all 16 into a single 2048x2048 bitmap. Roads and paths are impossible on a 508 tile at proper scale.

Textures Needed:         
mytile.bmp_______Diffuse ___   _Basic image
mytile_D.bmp_____ _D aka _a0 _Detail Map asphalt roads etc
mytile_S.bmp_____ _S aka _b1 _Sun - Specular Map, flat to shiny terrain features
mytile_n.bmp____  _n_________  _Normal map, bump map and 3d effects
mytileclutter.bmp__Clutter___ _Farm crops, weeds, cracked mud etc

_a0 and clutter maps are grayscale  using values 0, 16, 32, 48, ...240.
b1 is sun reflections Specular , is the only map that uses the full range of
grayscale. 129 is neutral, lower is darker, higher is brighter.

Note: using the a0,a1,b0,b1 nomenclature forces the bitmap into the
specified slot while using the intuitive D and S nomenclature might not.

terrdet (used for terrsets)

0  00 sandsnow.bmp
2  10 mud.bmp
3  20 cracked.bmp
4  30 dirtroad.bmp
5  40 grassrock1.bmp
6  50 grassrock2.bmp
7  60 grass1.bmp
8  70 grass2.bmp
9  80 moss.bmp
10 90 leaves.bmp
11 A0 ivy.bmp
12 B0 gravel.bmp
13 C0 rock1.bmp
14 E0 farm1.bmp
15 F0 farm2.bmp
16 FF noise.bmp

objdet (used for object tiles)

0  00 asphalt01.bmp
2  10 asphalt03.bmp
3  20 concrete01.bmp
4  30 concrete02.bmp
5  40 3secconcrete.bmp
6  50 4secconcrete.bmp
7  60 grass1obj.bmp
8  70 dirt02.bmp
9  80 gravel01.bmp
10 90 rocks.bmp
11 A0 grassrock2.bmp
12 B0 brick05.bmp
13 C0 brick02.bmp
14 D0 dirtroad.bmp
15 E0 concrete04.bmp
16 F0 dirtroad.bmp
« Last Edit: July 31, 2022, 12:26:07 AM by Easyscor »
Easy in-game again.
Since Tour 19 - 2001

Offline JimmyD3

  • Platinum Member
  • ******
  • Posts: 4015
Re: Object Editor Questions
« Reply #2 on: July 31, 2022, 01:52:52 PM »
Thank you for the quick reply Easyscor. Been wanting to learn it anyway, guess I'll just have to dive in and hit you up with questions when I get stumped.  :D

You may have heard about the "gv's hiding in buildings" issue in the MA. As far as I can determine, there is only 1 building that allows that and I was going to try and figure out a way to fix it. Oh yeah its only available on one specific terrain tile.

 :salute
Kenai77
CO Sic Puppies MWK
USAF 1971-76

Offline Easyscor

  • Plutonium Member
  • *******
  • Posts: 10899
Re: Object Editor Questions
« Reply #3 on: August 17, 2022, 11:16:24 AM »
I need to update what I posted. If you use Photoshop, maybe it works better. Here's how I manage to get GIMP to work with the Object Editor. The two programs really don't seem to like each other. I suspect it's some sort of incompatibility with an "end of file" marker.

GIMP - Converting to index takes too long and isn't best anyway
- Don't use your original multi-layer files when creating a bitmap for AH. Your original file name should NOT be the same as your target bitmap file name. Too easy to delete the wrong file!

- New from Visible (creates a new layer)
- Select All (on the new visible layer)
- Copy (the "visible" layer)
- Paste As New Image
New GIMP File/Image created
- Remove Alpha Channel (right click it in the Layers dialog)
- Export As
- [Select file or Enter name]
- Will ask to over-write
- off, Run Length Encoded
- on, Compatibility Options
- on, Advanced Options should default to RGB
- Export

If the Object Editor says it can't find
the bitmap, delete the bitmap file and
Export again. GIMP should still show
your file name in the dialog.

If it still dosen't work, quit
the OE and relaunch it.

Eventually one of these methods will start it working again.
Easy in-game again.
Since Tour 19 - 2001

Offline popeye

  • Gold Member
  • *****
  • Posts: 3660
Re: Object Editor Questions
« Reply #4 on: September 06, 2022, 02:40:50 PM »
"Terrsets - start in the TE and export the terrset used in your currently loaded terrain."

The export function in TE doesn't offer any modifiers.  So, can't export the terrset.

Maybe my version of TE is out of date:  Rev 3.06 Patch 4.   ??
KONG

Where is Major Kong?!?

Offline Easyscor

  • Plutonium Member
  • *******
  • Posts: 10899
Re: Object Editor Questions
« Reply #5 on: September 07, 2022, 03:19:30 PM »
You're right! My bad! It's been way too long.

In this Terrain Editor forum, see the "Aces High Default Tiles" sticky at the top.
Everything you need is in there.

iirc though you'll need to correct some of the internal file paths for some of the text files to work. Not surprising due to their age.
Easy in-game again.
Since Tour 19 - 2001