Author Topic: Bios at 8x but smartgart stuck at "off" . I'm stumped  (Read 392 times)

Offline SunKing

  • Gold Member
  • *****
  • Posts: 3726
Bios at 8x but smartgart stuck at "off" . I'm stumped
« on: December 03, 2003, 11:30:15 PM »
My motherboard is a Albatron KX400-8X with the latest bios. In bios I have the APG Aperture Size set to 8x. When I go to the "Smartgart(tm)" tab it shows my APG Speed with the slider at "off". I try to move it to 4x or 8x and each time I reboot the slider goes back to OFF... Any ideas to get this to work at 4 or even 8? Thanks.

My system

WinXp Prof.
ATI 9700pro cat 3.9 w/COD hot fix
Albatron KX400-8X mobo
2100xp AMD @ 1.7mhz
60gig IBM HDD

Offline mrblack

  • Parolee
  • Gold Member
  • *****
  • Posts: 2191
Bios at 8x but smartgart stuck at "off" . I'm stumped
« Reply #1 on: December 04, 2003, 01:38:30 AM »
Set you apeture to 4 you'r motherboard may not support 8x AGP.
Check you'r manuel.
« Last Edit: December 04, 2003, 02:30:15 AM by mrblack »

Offline FOGOLD

  • Silver Member
  • ****
  • Posts: 1886
Bios at 8x but smartgart stuck at "off" . I'm stumped
« Reply #2 on: December 04, 2003, 01:58:08 AM »
AGP won't work at Aperture=8.

Offline zmeg

  • Silver Member
  • ****
  • Posts: 936
Bios at 8x but smartgart stuck at "off" . I'm stumped
« Reply #3 on: December 04, 2003, 08:19:39 AM »
Reload your chipset drivers.

Offline Skuzzy

  • Support Member
  • Administrator
  • *****
  • Posts: 31462
      • HiTech Creations Home Page
Bios at 8x but smartgart stuck at "off" . I'm stumped
« Reply #4 on: December 04, 2003, 11:25:55 AM »
Aperature size is the amout of AGP memory space that can be used on the system side SunKing, it has nothing to do with the bus speed.
Roy "Skuzzy" Neese
support@hitechcreations.com

Offline SunKing

  • Gold Member
  • *****
  • Posts: 3726
Bios at 8x but smartgart stuck at "off" . I'm stumped
« Reply #5 on: December 04, 2003, 07:58:41 PM »
so which one really needs to be set to 4x or 8x? the mobo bios or display drivers?

Offline FOGOLD

  • Silver Member
  • ****
  • Posts: 1886
Bios at 8x but smartgart stuck at "off" . I'm stumped
« Reply #6 on: December 05, 2003, 01:51:18 AM »
You should have a setting in BIOS SETUP  CHIPSET FEATURES or similar.

On that list is "AGP MOde" usually its "Auto" ""2x" "4x" or "8x".

Set it to Auto. Further down is "AGP ApertureSize". Set that to 64 or 128.  THESE ARE COMPLETELY DIFFERENT.

I would set AGP mode to Auto or at most 4X just now and see if everything is ok.

Have a look on the web for BIOS set up guides.

Try http://www.rojakpot.com

Offline bloom25

  • Silver Member
  • ****
  • Posts: 1675
Bios at 8x but smartgart stuck at "off" . I'm stumped
« Reply #7 on: December 07, 2003, 02:04:33 AM »
Your video card is running in PCI mode because the aperature size is set too low.  It should be set to either 64 or 128MB.  (As correctly noted above.)

As for the AGP speed, you might be able to set the max transfer rate in the bios, and adjust it in Smartgart.  There's currently no significant performance benefits to AGP 8x versus 4x, so don't worry about it too much if you can only get the card to run at 4x.