Author Topic: Help with views  (Read 393 times)

Offline AKFokerFoder+

  • Nickel Member
  • ***
  • Posts: 661
Help with views
« on: April 29, 2004, 12:47:43 PM »
Is there anyway to map multiple views, say for LooKBack?  One view would let you look back to the port side of your seat, the other view would let you look back on the starboard side of your seat.

A pilot is able to move his head quickly to look around the rear seat or look around window frames etc.  In AH the left and right arrows are pitifully slow.  This makes SA in a fight more difficult than it probably was in real life.

Offline frank3

  • Plutonium Member
  • *******
  • Posts: 9352
Help with views
« Reply #1 on: April 29, 2004, 01:36:01 PM »
Sure is, use the F10 key (wasn't it?) to save your head position, so when you look back and move to the wanted view, press the F10 button and that position will be saved.

You can only store 1 changed view like this tho...

Offline AKFokerFoder+

  • Nickel Member
  • ***
  • Posts: 661
Help with views
« Reply #2 on: April 29, 2004, 02:57:50 PM »
Ty for reply Frank :)

I meant is there a way to store (with F10) more than 1 view, say map a stick key and then map a keyboard key both would give you a rear view, but a different F10 saved view.

Offline dedalos

  • Plutonium Member
  • *******
  • Posts: 8052
Help with views
« Reply #3 on: April 29, 2004, 03:05:56 PM »
Quote
Originally posted by AKFokerFoder+
Ty for reply Frank :)

I meant is there a way to store (with F10) more than 1 view, say map a stick key and then map a keyboard key both would give you a rear view, but a different F10 saved view.


I think you may be able to use the SHIFT button on the stick.  Not sure
Quote from: 2bighorn on December 15, 2010 at 03:46:18 PM
Dedalos pretty much ruined DA.

Offline AKFokerFoder+

  • Nickel Member
  • ***
  • Posts: 661
Help with views
« Reply #4 on: April 29, 2004, 04:07:24 PM »
I guess I am just confusing people.

I can map the LookBack with stick and keyboard, I just get the same F10 saved view with both stick an keyboard.  I want to look back on both sides of the seat without having to wait the 2-3 seconds for the arrow key to move me to the other side of the seat.  A pilot could turn his head to look at both sides of the seat in well under a second.

Offline Furious

  • Gold Member
  • *****
  • Posts: 3243
Help with views
« Reply #5 on: April 29, 2004, 04:29:19 PM »
what stick?

I am absolutely positive you could do this with a cougar or ch stick.


edit:
oops.   Now that I thought about it, I do not think you can.  The head position is saved according to which view is current when f10 is hit and there is only on hps file per plane.

AH2 will have mouse look, so it shouldn't matter then.
« Last Edit: April 29, 2004, 04:35:29 PM by Furious »

Offline RTR

  • Gold Member
  • *****
  • Posts: 2915
Help with views
« Reply #6 on: April 29, 2004, 05:43:07 PM »
Yes you can do this FokerFoder. with an 8 way hatswitch on your stick you should have a total of 16 views available to you. (actually 24 if you map "look down" as well)

look fwd
look right fwd
look right
look back right
look back
look back left
look left
look left fwd

Map your shift key to Look up (or a button on your joystick as I have)

if you hold the shift key once its mapped you will have all 8 views above, now also looking up at about a 45 degree angle.

If you are using the keypad for views and using the above views to set, going around the clock would be:

From the keypad: (assuming look fwd is the default)

no key pushed
9
6
3
2
1
4
7

Map 8 to look up and as long as it is held down you will get all the views again but looking up at a 45 degree angle.

You can set all these views in game from the clipboard.

from the cliboard:   setup---> stickmapping  (or keymapping for using the keypad)

Hope this is what you were looking for.
Cheers,
RTR
The Damned

Offline SKurj

  • Gold Member
  • *****
  • Posts: 3630
Help with views
« Reply #7 on: April 29, 2004, 06:35:52 PM »
U can't map 2 keys/buttons to Lookback, or any view besides look forward.   At least what I think you are asking is...  map a view to lookback, then adjust lookback to look left of the tail, save it to a key and then adjust the view to the right of the tail and then save it to a different key.

U can press F9 once in flight and get instant snap views, which u can do much faster than in reality, unless you are Linda Blair...



SKurj

Offline AKFokerFoder+

  • Nickel Member
  • ***
  • Posts: 661
Help with views
« Reply #8 on: April 29, 2004, 06:52:30 PM »
SKurg

Yes that is what I am asking.  Also I now remember programing the forward view for 2 seperate look angles in an earlier version of AH, that was about 2 years ago.

The F9 snap view?  What does it do?.

I have also heard of a Padlock view, not sure how that is supposed to work.  I can lock down a bogey with shift tab, but all I get is a highlighted bogey.  That helps somewhat but not much
« Last Edit: April 29, 2004, 07:13:10 PM by AKFokerFoder+ »

Offline SKurj

  • Gold Member
  • *****
  • Posts: 3630
Help with views
« Reply #9 on: April 29, 2004, 09:36:28 PM »
F9 as soon as u get in the cockpit, try it, it just makes views change instantly when you move the HAT.


SKurj

Offline AKFokerFoder+

  • Nickel Member
  • ***
  • Posts: 661
Help with views
« Reply #10 on: April 30, 2004, 02:12:30 PM »
WOW! F9 is fast! I like it, thanks :)

Now I can quickly see how many bogeys are on my 6 ;)