Author Topic: Voice problem/ SB Audigy ? (Read 2170 times)

Frodo · « **Reply #15 on:** June 03, 2004, 08:22:28 PM »

I have the via kt266/a chip set. Thawky has a different chip set.Pipz had no luck with the driver update.

Dumb question maybe. But updating the VIA driver wouldn't seem to matter? Since everything works in all applications, except AH II Online.(even works in AH II Offline)

Hope HTC can give us an opinion on this problem soon.

Frodo

Hajo · « **Reply #16 on:** June 04, 2004, 03:46:00 AM »

Frodo.

Updating chipsets is important.

As new software and Dx versions come out, and graphics accelerators....the chipsets need to be upgraded to handle the new instructions.

For instance...when I purchased my 9800 Pro...ATI included instructions that Via drivers need to be upgraded or the 9800Pro would not work.....result black screen of death.

You have an older version of the Via chipset.....dload and install the Hyperion Drivers from Via....think you'll find it will help.

Frodo · « **Reply #17 on:** June 04, 2004, 12:44:49 PM »

Thanks for the info. guys. I updated to the Hyperion drivers, and I get the same result. Still will not work in AH II Online.

Thawky has Nforce2 chipset, and same problem. Pipz updated and has same result as me.

From all the info. in this thread, it still seems like an AH II bug?

Can't get a reply from HTC, so who knows?

Frodo

Thawky · « **Reply #18 on:** June 06, 2004, 08:57:02 PM »

Uninstalled my audigy soundcard and tried the onboard one on my MB. Same problem . Works in AH1 and AH2 offline not online Though. Tried turning off the firewall and still not working.

Misfit · « **Reply #19 on:** June 07, 2004, 12:38:33 AM »

I have a Audigy Gamer and have noticed that it takes a few seconds after i first log in to hear any sounds. This is, as of patch 37 and 38. The sound just seem to take longer to load, but after the load np after that.

Frodo · « **Reply #20 on:** June 07, 2004, 03:22:17 PM »

Thawky, I have tried some more tweaking of different things, and I still get the same result.

Maybe we will come across a fix, but it sure would be nice to get some feedback from HTC. Maybe after they release AH II we will get some feedback.

Frodo

LLv34 Jarsci · « **Reply #21 on:** June 07, 2004, 03:28:39 PM »

Hmmm...

I got the same problem and ALSO

when trying with keyboard to transmit-->

1. using channel radio with shift-F12 = locks the channel, you can see that the yellow light is on , wont shut down until you press the joystick key assigned to channel radio.

2. using F12 for range radio= you wont transmit at all, no purple highlight

Of course you have to have radio open to see that.

Might be somekind of joystick /USB combo prob

Using MSFF2 here.

HT, any luck?

hitech · « **Reply #22 on:** June 07, 2004, 03:35:10 PM »

Frodo, From every thing you describe, i.e. works ahI , and works in offline, plus other people can hear you. Leads to only 1 posibility somthing is blocking you from recieving the UDP packets, i.e. somthing with a fire wall setup.

HiTech

Frodo · « **Reply #23 on:** June 07, 2004, 03:56:42 PM »

Thanks for the info. HT. I just needed someone to point me in the right direction.

All I run at the moment is ZoneAlarm, and it is shut off when I play. My router went out a couple of weeks ago, and I will make sure nothing is left running/enabled from it.

I will go through everything, and see what I come up with.

Thanks

Frodo

LLv34 Jarsci · « **Reply #24 on:** June 07, 2004, 04:21:44 PM »

Hmm, managed to misread earlier posts.. thought your voice doesn't work at all.

I cannot transmit and never hear anything from anyone.

In AH1 works like a charm.

SQD mates also say that while it shows me transmitting on my comp, they cannot see me transmitting.

Check 6 calls go through, and shutting down the firewall doesn't help.

Also reinstallin whole system didn't help.
No help lowering acceleration either.

Have tried with multiple nvidia drivers (nforce2 soundstorm board, epox 8RDA+) and no luck so far.

Actually I have never gotten vox to work in AH2 while I tested it earlier also...

Beats me , hope it doesn't do the same to HTC....

Frodo · « **Reply #25 on:** June 09, 2004, 02:55:33 PM »

Ok still have same problems. I uninstalled zone alarm,spybot,and ad-aware with no luck. WinMX is next, although I have never allowed file sharing.Guess I will try other drivers next also.

Thawky or Jarsci or anyone else have any luck?

Cheers

Frodo

Thawky · « **Reply #26 on:** June 09, 2004, 04:28:52 PM »

Nope . but HTC not too worry. When they kill ah1 ,ah2 will use same ports as ah1. Then if vox works in ah1 it should work in ah2

Thawky

Frodo · « **Reply #27 on:** June 09, 2004, 07:20:31 PM »

Thanks for the reply Thawky. Hope your right.

Frodo

mtnman · « **Reply #28 on:** June 10, 2004, 08:12:41 PM »

I also have absolutely no vox in/out in AH2. I have tried re-installing, downloading all updated drivers, DirectX9.0b, etc. with no luck. No firewall when I play AH, also no AV. All settings are the same as for AH1, where my vox works great. I have sound on my MB (nVIDEA M7NCD, nFORCE2 chipset, with AC'97 sound on an ALC650 chip) I have tried everything I can think of, considering buying a new soundcard. Any ideas/recommendations? Oops, Thawky, just read your post saying HT says it will work later if it works in AH1 now. No idea what the port thing means, but I guess I don't need to.

Frodo · « **Reply #29 on:** June 11, 2004, 12:14:57 PM »

Mtnman go offline in AH II, and enter "Server" in the radiobox for voice. Test it and see if you can hear your voice.

Just curious, as it works offline for Thawky, and myself also.

Cheers

Frodo