« previous next »
Pages: [1] 2   Go Down

Author Topic: 60mm fan or 80mm  (Read 781 times)

Offline jetb123

  • Silver Member
  • ****
  • Posts: 1807
60mm fan or 80mm
« on: August 26, 2004, 03:43:47 AM »
Alright I have a choice between a 60mm fan that will fit in the back of my case. So it will blow out. My case already came with a side fan that sucks in. Should I buy a 60mm fan tat blow out the back. Our a 80mm the going to suck in from the front? I will be oredering computer tommrow just trying to get things right.
Logged

Offline boxboy28

  • Gold Member
  • *****
  • Posts: 2265
      • http://none
60mm fan or 80mm
« Reply #1 on: August 26, 2004, 08:29:19 AM »
you want to match air coming in to the case to air going out of the case. This is measured in CFM (cubic ft per min.)
You need to find out what the side fan blowing in is producing (air moving) and get a fan that mayches that!

Now i saw in one of your other post you mentioned OC your PC dont do it till you have read every thing there is to know and do it one little step at a time, And if you do you better get a better Heat sink and fan than the stock one that comes with a XP 2500 barton! Besides i think the stepping on all Bartons is now locked you will only be able to OC the FSB to 200 or so!
Logged
^"^Nazgul^"^    fly with the undead!
Jaxxo got nice tata's  and Lyric is Andre the giant with blond hair!

Offline schizer

  • Copper Member
  • **
  • Posts: 298
60mm fan or 80mm
« Reply #2 on: August 26, 2004, 09:05:19 AM »
I have a feeling someone is gonna end up frying his computer
Logged

Offline Skuzzy

  • Support Member
  • Administrator
  • *****
  • Posts: 31462
      • HiTech Creations Home Page
60mm fan or 80mm
« Reply #3 on: August 26, 2004, 01:47:39 PM »
Boxboy, the first (and only) XP Barton I bought had the muliplier unlocked.  Just FYI.  They do exist.
Logged
Roy "Skuzzy" Neese
support@hitechcreations.com

Offline wrag

  • Gold Member
  • *****
  • Posts: 3499
60mm fan or 80mm
« Reply #4 on: August 26, 2004, 02:11:12 PM »
Runnin a 2500 barton at 333 right now.

Heat seems to be and issue with my system,  got 3 fans bringin air in and 2 (powersupply fan counts as one) blowing it out.  Also has holes cut in oppisite side from side fan.  Got the side panel off and a external fan blowin on everything now :(

Doesn't make sense cause my son has identical system but it's runnin as much as 10 degree's cooler with the same stock fans and stock heatsink?????

Gettin right around 50C runnin AH now.  Used to go up to 68C  :(

Replaced stock heatsink with a swiftech MCX462-V.  Using a standard 80mm fan on heatsink.

Note: my ATI9800 pro fried and the replacement is otw.  Have to run my old 9000 pro for now.  Heat seems to follow me around on all my systems :(
Logged
It's been said we have three brains, one cobbled on top of the next. The stem is first, the reptilian brain; then the mammalian cerebellum; finally the over developed cerebral cortex.  They don't work together in awfully good harmony - hence ax murders, mobs, and socialism.

Offline jetb123

  • Silver Member
  • ****
  • Posts: 1807
60mm fan or 80mm
« Reply #5 on: August 26, 2004, 03:06:07 PM »
Quote
Originally posted by boxboy28
you want to match air coming in to the case to air going out of the case. This is measured in CFM (cubic ft per min.)
You need to find out what the side fan blowing in is producing (air moving) and get a fan that mayches that!

Now i saw in one of your other post you mentioned OC your PC dont do it till you have read every thing there is to know and do it one little step at a time, And if you do you better get a better Heat sink and fan than the stock one that comes with a XP 2500 barton! Besides i think the stepping on all Bartons is now locked you will only be able to OC the FSB to 200 or so!
 LOL that was Jay1988.
Logged

Offline Flyboy

  • Silver Member
  • ****
  • Posts: 1582
60mm fan or 80mm
« Reply #6 on: August 26, 2004, 05:32:35 PM »
Quote
Originally posted by wrag
Runnin a 2500 barton at 333 right now.

Heat seems to be and issue with my system,  got 3 fans bringin air in and 2 (powersupply fan counts as one) blowing it out.  Also has holes cut in oppisite side from side fan.  Got the side panel off and a external fan blowin on everything now :(

Doesn't make sense cause my son has identical system but it's runnin as much as 10 degree's cooler with the same stock fans and stock heatsink?????

Gettin right around 50C runnin AH now.  Used to go up to 68C  :(

Replaced stock heatsink with a swiftech MCX462-V.  Using a standard 80mm fan on heatsink.

Note: my ATI9800 pro fried and the replacement is otw.  Have to run my old 9000 pro for now.  Heat seems to follow me around on all my systems :(


wow this is nutts!

i think you should not place your computer on the oven next time!
Logged

Offline jay1988

  • Nickel Member
  • ***
  • Posts: 541
60mm fan or 80mm
« Reply #7 on: August 27, 2004, 09:03:00 AM »
THIS IS JAY1988. The 2500 is not locked. I bought it last week and overclocked it. My temp is 30c-40c. GL to u jet
Logged

Offline Overlag

  • Gold Member
  • *****
  • Posts: 3888
60mm fan or 80mm
« Reply #8 on: August 27, 2004, 11:41:12 AM »
Quote
Originally posted by Skuzzy
Boxboy, the first (and only) XP Barton I bought had the muliplier unlocked.  Just FYI.  They do exist.


from about week 39-41 last year(2003) they started locking them because far to many 2500s could be sold as 3000/3200s by remarkers.

the new locks on these bartons are IMPOSSIBLE to unlock from what i remember, unless something has changed in the last 6 months.

Quote
Originally posted by jay1988
THIS IS JAY1988. The 2500 is not locked. I bought it last week and overclocked it. My temp is 30c-40c. GL to u jet


it must be a REALLY old cpu if its unlocked.


unless you mean you just bumpped the FSB up...FSB cant be locked, but a 2500 is locked at 11, unless you brought a mobile 2500?
« Last Edit: August 27, 2004, 11:43:52 AM by Overlag »
Logged
Adam Webb - 71st (Eagle) Squadron RAF Wing B
This post has a Krusty rating of 37

Offline wrag

  • Gold Member
  • *****
  • Posts: 3499
60mm fan or 80mm
« Reply #9 on: August 27, 2004, 12:34:01 PM »
Quote
Originally posted by Overlag
from about week 39-41 last year(2003) they started locking them because far to many 2500s could be sold as 3000/3200s by remarkers.

the new locks on these bartons are IMPOSSIBLE to unlock from what i remember, unless something has changed in the last 6 months.

 

it must be a REALLY old cpu if its unlocked.


unless you mean you just bumpped the FSB up...FSB cant be locked, but a 2500 is locked at 11, unless you brought a mobile 2500?


11?  mine is at 1833?  says max is over 2250???

FSB is either 166 or 333 with my Asus A7V8X-X.

Did see someone somewhere with a jumper set up for AMD that unlocked chip if it was locked.  Fit over about 4 pins and stuck out the side of the cpu.

Says it's an AMD Athlon  XP2500+.

Maybe I don't understand your 11 statement?
Logged
It's been said we have three brains, one cobbled on top of the next. The stem is first, the reptilian brain; then the mammalian cerebellum; finally the over developed cerebral cortex.  They don't work together in awfully good harmony - hence ax murders, mobs, and socialism.

Offline DAVENRINO

  • Silver Member
  • ****
  • Posts: 1084
60mm fan or 80mm
« Reply #10 on: August 27, 2004, 01:24:54 PM »
I really can't remember when I bought mine, but it was the same time the 9800XT came out.  I got mine from Newegg and it was unlocked.  I tried a lot ot combos but got the best performance with the multiplier at 11 and the FSB at 200.
Logged
DAVE aka DJ229-AIR MAFIA
CH USB HOTAS/ONKYO 705 7.2 SURROUND SOUND/ 60" SONY A3000 SXRD  TV

Offline Overlag

  • Gold Member
  • *****
  • Posts: 3888
60mm fan or 80mm
« Reply #11 on: August 27, 2004, 01:37:02 PM »
Quote
Originally posted by wrag
11?  mine is at 1833?  says max is over 2250???

FSB is either 166 or 333 with my Asus A7V8X-X.

Did see someone somewhere with a jumper set up for AMD that unlocked chip if it was locked.  Fit over about 4 pins and stuck out the side of the cpu.

Says it's an AMD Athlon  XP2500+.

Maybe I don't understand your 11 statement?


11x166 = 1833

its locked at 11

and no, these 2500s are HARD locked now, NOTHING unlocks them, its not like the old days of joining L1 bridges
Logged
Adam Webb - 71st (Eagle) Squadron RAF Wing B
This post has a Krusty rating of 37

Offline wrag

  • Gold Member
  • *****
  • Posts: 3499
60mm fan or 80mm
« Reply #12 on: August 27, 2004, 06:52:47 PM »
Ah cc understnad now TY :)
Logged
It's been said we have three brains, one cobbled on top of the next. The stem is first, the reptilian brain; then the mammalian cerebellum; finally the over developed cerebral cortex.  They don't work together in awfully good harmony - hence ax murders, mobs, and socialism.

Offline AaronM2

  • Parolee
  • Nickel Member
  • ***
  • Posts: 679
60mm fan or 80mm
« Reply #13 on: August 28, 2004, 08:09:04 PM »
get a cooling sytem like 200$ but its worth it im not im going to put fan in im geting a 5600+ amd xp :) my over clock it dont know if i do i will get 1 more exrta fan theres a post of every thing in General Dissicussion hows this look by me theres pics a bottom im going to try to avoid SP2 for a long while hehe messed up every thing couldent even work on web site
« Last Edit: August 30, 2004, 04:34:03 PM by AaronM2 »
Logged

Offline Skuzzy

  • Support Member
  • Administrator
  • *****
  • Posts: 31462
      • HiTech Creations Home Page
60mm fan or 80mm
« Reply #14 on: August 30, 2004, 07:26:18 AM »
Quote
Originally posted by Overlag
from about week 39-41 last year(2003) they started locking them because far to many 2500s could be sold as 3000/3200s by remarkers.

the new locks on these bartons are IMPOSSIBLE to unlock from what i remember, unless something has changed in the last 6 months.

 

it must be a REALLY old cpu if its unlocked.


unless you mean you just bumpped the FSB up...FSB cant be locked, but a 2500 is locked at 11, unless you brought a mobile 2500?


The one I bought just a couple of weeks ago, was a 2800+.  It was unlocked and is happily a 3200+ now.
Logged
Roy "Skuzzy" Neese
support@hitechcreations.com
Pages: [1] 2   Go Up
« previous next »