Author Topic: Vox problem in AHII with SB-AG2 (Read 492 times)

GA · « **on:** September 18, 2004, 04:47:27 PM »

Since AHII I have had problems with my new sound card SB-AG2

I hear others good on Vox, but im breaking up when using the vox.

Any ideas or others with that problem......

All sound and Vox inn is fine, just my outgoing Vox who is breaking up...

Estes · « **Reply #1 on:** September 19, 2004, 11:38:50 AM »

It could be your mic is dieing.

Try recording yourself in windows and see if it still breaks up.

GA · « **Reply #2 on:** September 19, 2004, 11:50:27 AM »

Windows work great, Ventrilo works great, Rogerwilco works great. Not AHII Vox

Estes · « **Reply #3 on:** September 19, 2004, 11:54:38 AM »

Have you tried lowering your sound acceleration down a notch?

start/run/dxdiag

Adjust it from there. I have mine at 3/4's

fuzeman · « **Reply #4 on:** September 19, 2004, 01:26:20 PM »

Also, goto Setup > Preferences > Voice, at the top there is a 'Use Wave In' box, change that to see if it makes any difference.
Per Skuzzy and his tips, sound hardware acceleratin should be 3/4 as mentioned above.

GA · « **Reply #5 on:** September 19, 2004, 01:30:17 PM »

Thx gents im ib and try it out, wil give you feed back on it

Estes · « **Reply #6 on:** September 19, 2004, 03:26:16 PM »

Quote

Originally posted by fuze
Also, goto Setup > Preferences > Voice, at the top there is a 'Use Wave In' box, change that to see if it makes any difference.
Per Skuzzy and his tips, sound hardware acceleratin should be 3/4 as mentioned above.

I haven't had to change that with my newer SB Audigy card. I'm using the Audigy 2 Platinum now. When I used an Audigy Gamer, I would have to check that everytime I logged in.

Mine would never break up, but I would have to check that for people to be able to hear me.

GA · « **Reply #7 on:** September 25, 2004, 03:36:54 PM »

Tryed all obove, no luck, still can only hear 1 sec and cracking up............