Author Topic: I need a wheel rim (Read 430 times)

Mickey1992 · « **on:** December 27, 2004, 09:50:58 PM »

I need a wheel rim for my Mom's '98 Volvo S90. The tires on there currently I think are 16" (P205/55 R16).

Question: Any of you car nuts know what rim will fit the car? Do I need to get a rim from a '98 S90, or will other models/years fit? I am not finding any useful info on the web, and the couple of salvage yards I have called are not much help.

streetstang · « **Reply #1 on:** December 27, 2004, 10:02:18 PM »

With exception to the '93 850 (4 lugs) and S/V40's, Volvo's from the 144 series on up had a 5x108 (5x4.25") bolt pattern.
Sub-grouping those ... with the exception of early 140's/164 and 95+ 960's, RWD Volvo's had an offset of 20-25mm. The early ones had a 40mm offset on narrow wheels, and the 95+ 960, along with other FWD, has the common FWD offset of 43mm, give or take a few. The centerbore is 65.1mm.

8" is about the widest on any, though some may need slight modifications and/or deviation from spec.

Ford Taurus, Windstar, Thunderbird, Mercury Sable, and Lincoln LS share the same bolt pattern, though slightly different offset (38mm, give or take), and 63.9mm centerbore.

I used to help out a buddy from time to time who worked at a volvo dealership.

Basicly I was just there so I could use the lift when I wanted.

RightF00T · « **Reply #2 on:** December 28, 2004, 12:25:31 AM »

Try this site: http://www.car-part.com/index.htm

rpm · « **Reply #3 on:** December 28, 2004, 02:39:59 AM »

Good luck finding a single OEM wheel. All the junkyards want to sell full sets. Don't forget to check Ebay.

hblair · « **Reply #4 on:** December 28, 2004, 07:42:25 AM »

All the salvage yards I deal with are happy to sell single rims. Is that a 7-hole 16" alloy? Looks like it's in the 125 greenback range.

TheDudeDVant · « **Reply #5 on:** December 28, 2004, 07:53:05 AM »

hblair.. you in the auto business over there in Gadsden?

hblair · « **Reply #6 on:** December 28, 2004, 07:54:35 AM »

body shop business...

TheDudeDVant · « **Reply #7 on:** December 28, 2004, 07:57:08 AM »

hehe righton.. you guys working early I see.. 8)

Was just wondering.. always looking for trucks here.. 8)

hblair · « **Reply #8 on:** December 28, 2004, 11:14:08 AM »

Are you in alabama?

TheDudeDVant · « **Reply #9 on:** December 28, 2004, 11:36:49 AM »

Florence 8)

Thought we had this convo before.. hehe

Ripsnort · « **Reply #10 on:** December 28, 2004, 12:00:13 PM »

Quote

Originally posted by TheDudeDVant
Florence 8)

Thought we had this convo before.. hehe

You probably did, Hblairs been sniffing those Red(no clear coat) paint fumes alot!

hblair · « **Reply #11 on:** December 28, 2004, 12:05:39 PM »

hblairs from'55 on come with only base/clear systems. I can post my sher-wil sheet if you want. Detailers!:mad:

Ripsnort · « **Reply #12 on:** December 28, 2004, 12:07:01 PM »

Quote

Originally posted by hblair
hblairs from'55 on come with only base/clear systems. I can post my sher-wil sheet if you want. Detailers!:mad:

hblair · « **Reply #13 on:** December 28, 2004, 12:16:43 PM »

dudedvant, I'm here from 6-issh in the AM til 6-ish in the PM every weekday. Come by and see us sometime if you're in this area.

TheDudeDVant · « **Reply #14 on:** December 28, 2004, 01:01:53 PM »

right on man! those are some hellish hours at times I bet.. Dont get over that way too often.. lol

btw.. this is kappa if you dont know.. 8)