REM ÚÄÄÄÄÄÄÄÄÄÄÄÄÄ< Delete this section when you are done! >ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
REM ³ ³
REM ³ WCS Mark II ADV Programming Template ³
REM ³ ³
REM ³ Please supply as much requested information as possible. ³
REM ³ ³
REM ³ (Keep in mind though, that there is a 400 line limit to ADV files!) ³
REM ³ ³
REM ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ> <ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
REM
REM ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
REM º CAUTION!!! You MUST have ThrustMaster Command & Control Center º
REM º (MARK2.EXE) vs 1.38 or higher and MK2LOAD.EXE vs 5.01 or higher to º
REM º use the macro capability. You can tell if you have vs 1.38 by lookingº
REM º at the top of the C&CC screen where the version # is shown on any of º
REM º the menu screens or click on F-7 About to view the version #. To tellº
REM º if you have MK2LOAD.EXE vs 5.01 just download a file - you will see º
REM º the version # at the top of the download screen. To obtain the newer º
REM º versions if you do not have them, check with any of the listed places º
REM º in C:\MARK2\MK2UTILS\TMBBS.TXT where you may download the latest º
REM º versions of the Command and Control Center software. º
REM ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
REM Game Name, Version, Publisher
REM
REM YOUR ADV File Description
REM
REM Written and Tested by YOUR NAME - MONTH YEAR
REM ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
REM ºBase Switch Settings º
REM ºBlack Hat switch = Digital or Analog <= Choose one and erase the other º
REM ºRed Switch = Digital or Analog <== Choose one and erase the otherº
REM ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
REM ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
REM ºGame Settings: (Settings required for this game to use WCSII)º
REM ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
REM
REM ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
REM º Place Mdef files below this line (i.e. Mdef Newname)º
REM ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Mdef TEMPLATE
REM ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
REM º Change 'TEMPLATE' to the name of the MDF file that you º
REM º want your ADV file to reference. For example, if you º
REM º create a new ADV file called NEWSIM.ADV, you might wantº
REM º the line above to read 'Mdef NEWSIM'. º
REM ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
REM ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
REM º Place special macros below this line (i.e. @macroname, etc)º
REM ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
REM ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
REM º(P)FCS Buttons Commands:º
REM ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
BTN UB
BTN MB
BTN LB
BTN HU
BTN HD
BTN HL
BTN HR
REM ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
REM ºWCS II Buttons Commands:º
REM ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
BTN 1
BTN 2
BTN 3
BTN 4
BTN 5
BTN 6
REM ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
REM ºWCS II Rocker Commands: º
REM ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
RKR UP /P
/R
RKR DN /P
/R
REM ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
REM º NOTE: THIS FILE IS TO BE USED WITH THE NEW CHIP AND MICROCODE FOR º
REM º THE MARK II WCS ONLY. IF YOU DO NOT HAVE THIS CHIP, THEN CONTACT º
REM º THRUSTMASTER at 503-639-3200 TO INQUIRE ABOUT UPGRADING TO THE º
REM º NEW CHIP AND MICROCODE!!!! º
REM º º
REM º How can you tell if you have the new chip and microcode? At the º
REM º C:\MARK2 Dos prompt type DIR MK2LOAD.EXE and hit enter. If it º
REM º says "File not found then you have the old microcode version that º
REM º uses DOWNLOAD.EXE instead. º
REM ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
