Author Topic: Curious on system HW & Frame rates.  (Read 787 times)

Offline Stone

  • Nickel Member
  • ***
  • Posts: 459
Curious on system HW & Frame rates.
« on: July 12, 2005, 02:50:42 AM »
I think it would be fun to know what harware people have, and what frame rates they are getting.

Maybe some one who knows computers, like skuzzy, could set up a pool with just the essential data.

Eg. for my system, that I think is the essential data:

"GeForce 9500U 256 VRAM" "Athlon XP2800 CPU" "512 DDR RAM" "7200 RPM DISK" "XP HOME" "TOWER 70fps" "Min ~20fps Max ~80fps"

If the data could be entered structured for excel or db use  so people could compare systems and maybe figure out where the bottle neck might be?

Should not be too hard to do a web page with a form that stores the data into a db?

Offline Darkish

  • Nickel Member
  • ***
  • Posts: 429
Curious on system HW & Frame rates.
« Reply #1 on: July 12, 2005, 04:37:06 AM »
Nice idea, but with everyone using different ingame graphical/cpu slider settings, texture sizes and vid resolutions I'm worried that there are too many variables to make the data useful.

For the record: P4 3.06, 500MHz fsb, ati radeon 9800 128Mb, 1Gb 3200 ram, XP Home.

Sliders set to give a min of 35fps (my golden number) on the deck, though a flight of smoking bombers will choke it down to the 20's.

Offline Skuzzy

  • Support Member
  • Administrator
  • *****
  • Posts: 31462
      • HiTech Creations Home Page
Curious on system HW & Frame rates.
« Reply #2 on: July 12, 2005, 07:01:11 AM »
Nice idea, but it will not work.  You can take two identical systems, and the users will report drastically different frame rates.

Too many variables involved besides the hardware.  My 3.4Ghz P4 (Northwood) and ATI X800XT PE get (with vsync off for test purposes) anywhere from 100 to 400+ FPS.  

I already know there are faster systems out there which are performing much, much worse than that.  And there are many reasons why better system run worse.  Most of it is resource issues.
Roy "Skuzzy" Neese
support@hitechcreations.com

Offline humble

  • Platinum Member
  • ******
  • Posts: 6434
Curious on system HW & Frame rates.
« Reply #3 on: July 13, 2005, 04:06:34 PM »
What would be great is a "estimated" value of some kind that shows what a system "should" perform at. I'd love to see some type of AH benchmark (no idea how tough that is to do) so you could post system specs and "your number"....that would make it easier to know how close your system is to being AH optimized...

"The beauty of the second amendment is that it will not be needed until they try to take it."-Pres. Thomas Jefferson

Offline whels

  • Silver Member
  • ****
  • Posts: 1517
Curious on system HW & Frame rates.
« Reply #4 on: July 13, 2005, 05:29:41 PM »
30s runway, 50 to 70 furball/smoke field. 150+ alted.
3 sliders id guess are set to  all 3 90% left.

system below
Res 1280 x 1024,, 512 textures

Whels

Offline Stone

  • Nickel Member
  • ***
  • Posts: 459
Curious on system HW & Frame rates.
« Reply #5 on: July 14, 2005, 01:47:33 AM »
Quote
Originally posted by humble
What would be great is a "estimated" value of some kind that shows what a system "should" perform at. I'd love to see some type of AH benchmark (no idea how tough that is to do) so you could post system specs and "your number"....that would make it easier to know how close your system is to being AH optimized...


Some kind of in game benchmark, that with the users permission would send to HTC the data they need ?

"Would you like to send HTC your system info, for the benchmark database?" (Y/N)

And with that permission snif system info and slider settings etc.

I would press "Y" :aok

Offline Vipermann

  • Nickel Member
  • ***
  • Posts: 405
Curious on system HW & Frame rates.
« Reply #6 on: July 14, 2005, 10:23:15 AM »
Asus A8N-SLI Deluxe
Athlon FX55
2 GeForce 6800 GT's
2 36 GB rapters in RAID 0
2 74 GB rapters in RAID 0
1 GB Mushkin DDR

120 FPS all the time(vsync on)
Get Busy Living Or Get Busy Dieing

Offline Balsy

  • Nickel Member
  • ***
  • Posts: 717
Curious on system HW & Frame rates.
« Reply #7 on: July 14, 2005, 11:18:29 AM »
Viper,

Resolution?
Sliders in game position?
Preload settings?


Ive got:

FX-53
1 6800 GT
Asus deluxe - SLI
1 Gig corsair tinxxxl (2-2-2-5 cas stuff)


1600 x1200
Sliders set middle
Preload everything


68 in tower

119 at 5-10k alt.

Offline Vipermann

  • Nickel Member
  • ***
  • Posts: 405
Curious on system HW & Frame rates.
« Reply #8 on: July 14, 2005, 12:52:35 PM »
1024x768

Not sure of the sliders, I know I played with them a bit when I had dual 6600GT's and I never changed them when I got the 6800's.

highest textures full pre-load
Get Busy Living Or Get Busy Dieing

Offline jetb123

  • Silver Member
  • ****
  • Posts: 1807
Curious on system HW & Frame rates.
« Reply #9 on: July 14, 2005, 07:06:50 PM »
Dell dimsion 2400
Intel celeron 2.4ghz
System ram: 640mb
Video card: PCI 64mb Geforce mx4000
40mb harddrive.

Game settings: Textures 1024
Resolution: 1024x768
Preload skins
Hardware accelerator

Connection: Comcast cable...

I am surprised how good my system is I get frames of 85, and thats only because my monitor limits me. Who knows how high it can go. In furballs it might drop down to low 20s when theres a buring plane around or something like that.

 Most of my slidders are close to preformance. To me they only enhance trees. Which I hate lol.
« Last Edit: July 14, 2005, 07:08:55 PM by jetb123 »

Offline 715

  • Silver Member
  • ****
  • Posts: 1835
Curious on system HW & Frame rates.
« Reply #10 on: July 15, 2005, 12:49:49 AM »
P4 2.8 GHz 800MHz FSB, Northwood
Intel D865PERL motherboard
1.5 GB DDR400 dual channel RAM
9600XT 128MB graphics card
DX9.0c WinXP pro
512 textures

fps at Ozkansas P1 tower default view offline:

Res, AA/AF, In game sliders, fps
1280x1024, 4X/8X, 50/25/40% (default), 46
1280x1024, 4X/8X, 100/100/100 (max), 8
1280x1024, off/off, 50/25/40, 46
1600x1200, off/off, 50/25/40, 46
1600x1200, 4X/8X, 50/25/40, 23

Offline Roscoroo

  • Plutonium Member
  • *******
  • Posts: 8424
      • http://www.roscoroo.com/
Curious on system HW & Frame rates.
« Reply #11 on: July 15, 2005, 01:56:43 AM »
asus a7n8x-e del (4.27 drivers)
2500+ m barton @ 2.4 ghz (41c )
512 3200 ddr crucial
crucial 9600 pro 128 (4.7cats ) stock clocking
430 watt enermax ps
dx 9.0c

win 98se sp1.5 w/  irq's assigned (16 processes runnin)
133 ata hd maxtor

fully tweeked, luved and dialed in
(the weekly sacrifice helps too i think)

1100kbps dsl connect on 1gb lan

AH
sliders at 1/2- 65% left ,  distance maxed at 3 mi
8x
1024x768
vsync on
nothing preloaded

85 fps max

45-55 fps avg  ... i see 60's alot also
35 fps lowest in major furballs in the extreamest conditions


i only have 1 real glitch in the game and thats when 1st firing guns in a buff form i get a very breif game freeze ... and now and then it happens in a fighter ... exspecially in a h2h room (then i see alot of warps at the 200 distance )
Roscoroo ,
"Of course at Uncle Teds restaurant , you have the option to shoot them yourself"  Ted Nugent
(=Ghosts=Scenariroo's  Patch donation

Offline 68DevilM

  • Gold Member
  • *****
  • Posts: 2033
Curious on system HW & Frame rates.
« Reply #12 on: July 17, 2005, 07:52:01 PM »
i get 50's 60's in tower, and 80's in flight,

40's 50's furball

20's 30's in gv with alot of activity going on.

80's in flight

Offline 38ruk

  • Gold Member
  • *****
  • Posts: 2121
      • @pump_upp - best crypto pumps on telegram !
Curious on system HW & Frame rates.
« Reply #13 on: July 17, 2005, 09:53:19 PM »
75 fps in tower
65 fps on runways
75 fps in air
lowest ive seen is 52 in a heavy furball
Vsync enables 75 hertz
1280X1024,  all sliders at default , 2XAA, 256 textures
Preload everything into system mem . 11 processes at startup  in XP

Offline Overlag

  • Gold Member
  • *****
  • Posts: 3888
Curious on system HW & Frame rates.
« Reply #14 on: July 20, 2005, 06:45:13 PM »
7-18fps looking at trees
100-300fps in the air above the tree cut off point

:rolleyes:
Adam Webb - 71st (Eagle) Squadron RAF Wing B
This post has a Krusty rating of 37